main
Ray
Publish 0.1.0
4b837e6
LTC2631CTS8-LZ10#TRMPBF
Analog Devices · Digital To Analog Converters (DACs) · TSOT-23-8
LTC2631CTS8-LZ10#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CA0 | input | Chip Address Bit 0 must be tied to VCC, GND or left floating to select the I2C slave address of the part. |
| 2 | SCL | input | Serial clock input shifts data into SDA on rising edges and is high impedance, requiring a pull-up resistor or current source to VCC. |
| 3 | SDA | bidirectional | Serial data pin is high impedance while data is shifted in and is an open-drain N-channel output during acknowledgment, requiring a pull-up resistor or current source to VCC. |
| 4 | GND | power_in | Ground reference pin for the device. |
| 5 | VCC | power_in | Supply voltage input for the LTC2631-L must be 2.7V to 5.5V and should be bypassed to GND with a 0.1µF capacitor. |
| 6 | REF | bidirectional | Reference input or output where in External Reference mode 0V to VCC sets full scale, and in Internal Reference mode the 10ppm/°C 1.25V output is available, bypassable with up to 10µF (0.33µF recommended) and requiring a buffer for DC load current. |
| 7 | VOUT | output | DAC analog voltage output, with rail-to-rail output swing limited by the supply range and a guaranteed load regulation of up to 10mA sourcing or sinking at 5V. |
| 8 | CA1 | input | Chip Address Bit 1 for the LTC2631-Z must be tied to VCC, GND or left floating to select the I2C slave address of the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Supply Voltage For Specified Performance | VCC | 2.7 | 5.5 | V | For Specified Performance | 5 | |
| Operating Temperature Range (LTC2631C, commercial grade) | 0 | 70 | °C | LTC2631C | 2 | ||
| Supply Current, internal reference, VCC=3V, external ref | ICC | 150 | 200 | µA | VCC = 3V, VREF = 2.5V, External Reference | 5 | |
| Supply Current, VCC=3V internal reference | ICC | 180 | 240 | µA | VCC = 3V, Internal Reference | 5 | |
| Supply Current, VCC=5V external reference | ICC | 160 | 210 | µA | VCC = 5V, VREF = 2.5V, External Reference | 5 | |
| Supply Current, VCC=5V internal reference | ICC | 190 | 260 | µA | VCC = 5V, Internal Reference | 5 | |
| Supply Current in Power-Down Mode (C and I grade) | ISD | 0.6 | 1.8 | µA | VCC = 5V, C-Grade, I-Grade | 5 | |
| Full-Scale Voltage Temperature Coefficient (C-Grade) | VFSTC | -10 | 10 | ppm/°C | VCC = 3V, Internal Ref. (Note 9); C-Grade | 5 | |
| Reference Output Voltage (LTC2631-L internal reference) | VREF | 1.24 | 1.25 | 1.26 | V | 6 | |
| Reference Temperature Coefficient | -10 | 10 | ppm/°C | 6 | |||
| Reference Input Resistance | 160 | 190 | 220 | kΩ | 6 | ||
| Low Level Output Voltage (SDA) | VOL | 0.4 | V | Sink Current = 3mA | 6 | ||
| Output Fall Time | tOF | 250 | ns | VO = VIH(MIN) to VO = VIL(MAX), CB = 10pF to 400pF (Note 11) | 6 | ||
| Pulse Width of Spikes Suppressed by Input Filter | tSP | 0 | 50 | ns | 6 | ||
| Input Leakage | IIN | -1 | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 6 | |
| I/O Pin Capacitance | CIN | 10 | pF | (Note 7) | 6 | ||
| Capacitive Load for Each Bus Line | CB | 400 | pF | 6 | |||
| External Capacitive Load on Address Pin CAn | CCAn | 10 | pF | 6 | |||
| Differential Nonlinearity (LTC2631-10) | DNL | -0.5 | 0.5 | LSB | VCC = 3V, Internal Ref. (Note 3) | 5 | |
| Integral Nonlinearity (LTC2631-10) | INL | -1 | 0.2 | 1 | LSB | VCC = 3V, Internal Ref. (Note 3) | 5 |
| Zero-Scale Error (LTC2631-10) | ZSE | 0.5 | 5 | mV | VCC = 3V, Internal Ref., Code = 0 | 5 | |
| Offset Error (LTC2631-10) | VOS | -5 | 5 | mV | VCC = 3V, Internal Ref. (Note 4) | 5 | |
| VOS Temperature Coefficient | VOSTC | -10 | 10 | µV/°C | VCC = 3V, Internal Ref. (Note 4) | 5 | |
| Full-Scale Error | FSE | -0.4 | 0.08 | 0.4 | %FSR | VCC = 3V, Internal Ref. (Note 14) | 5 |
| DAC Output Span (internal reference) | VOUT | 0 | 2.5 | V | Internal Reference | 6 | |
| SCL Clock Frequency | fSCL | 0 | 400 | kHz | 7 | ||
| Hold Time (Repeated) Start Condition | tHD(STA) | 0.6 | µs | 7 | |||
| Low Period of the SCL Clock Pin | tLOW | 1.3 | µs | 7 | |||
| High Period of the SCL Clock Pin | tHIGH | 0.6 | µs | 7 | |||
| Set-Up Time for a Repeated Start Condition | tSU(STA) | 0.6 | µs | 7 | |||
| Data Hold Time | tHD(DAT) | 0 | 0.9 | µs | 7 | ||
| Data Set-Up Time | tSU(DAT) | 100 | ns | 7 | |||
| Rise Time of Both SDA and SCL Signals | tr | 300 | ns | (Note 11) | 7 | ||
| Fall Time of Both SDA and SCL Signals | tf | 300 | ns | (Note 11) | 7 | ||
| Set-Up Time for Stop Condition | tSU(STO) | 0.6 | µs | 7 | |||
| Bus Free Time Between a Stop and Start Condition | tBUF | 1.3 | µs | 7 | |||
| Settling Time (10-bit, ±0.098%) | tS | 3.8 | µs | VCC = 3V (Note 8); ±0.098% (±1LSB at 10-Bits) | 7 | ||
| Supply Voltage (VCC) absolute maximum | VCC | -0.3 | 6 | V | All voltages with respect to GND | 2 | |
| REF_SEL, SCL, SDA voltage absolute maximum | -0.3 | 6 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | (Note 5) | 2 | ||
| Thermal Resistance Junction-to-Ambient (TS8 8-lead TSOT-23) | θJA | 195 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LTC2631CTS8-LZ10#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ltc2631cts8-lz10-trmpbf-etched.step/ltc2631cts8-lz10-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2631cts8-lz10-trmpbf.step/ltc2631cts8-lz10-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
4c98446794069d98, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC2631CTS8-LZ10#TRMPBF
**Analog Devices** · Digital To Analog Converters (DACs) · TSOT-23-8
LTC2631CTS8-LZ10#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CA0 | input | Chip Address Bit 0 must be tied to VCC, GND or left floating to select the I2C slave address of the part. |
| 2 | SCL | input | Serial clock input shifts data into SDA on rising edges and is high impedance, requiring a pull-up resistor or current source to VCC. |
| 3 | SDA | bidirectional | Serial data pin is high impedance while data is shifted in and is an open-drain N-channel output during acknowledgment, requiring a pull-up resistor or current source to VCC. |
| 4 | GND | power_in | Ground reference pin for the device. |
| 5 | VCC | power_in | Supply voltage input for the LTC2631-L must be 2.7V to 5.5V and should be bypassed to GND with a 0.1µF capacitor. |
| 6 | REF | bidirectional | Reference input or output where in External Reference mode 0V to VCC sets full scale, and in Internal Reference mode the 10ppm/°C 1.25V output is available, bypassable with up to 10µF (0.33µF recommended) and requiring a buffer for DC load current. |
| 7 | VOUT | output | DAC analog voltage output, with rail-to-rail output swing limited by the supply range and a guaranteed load regulation of up to 10mA sourcing or sinking at 5V. |
| 8 | CA1 | input | Chip Address Bit 1 for the LTC2631-Z must be tied to VCC, GND or left floating to select the I2C slave address of the part. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Supply Voltage For Specified Performance | VCC | 2.7 | | 5.5 | V | For Specified Performance | 5 |
| Operating Temperature Range (LTC2631C, commercial grade) | | 0 | | 70 | °C | LTC2631C | 2 |
| Supply Current, internal reference, VCC=3V, external ref | ICC | | 150 | 200 | µA | VCC = 3V, VREF = 2.5V, External Reference | 5 |
| Supply Current, VCC=3V internal reference | ICC | | 180 | 240 | µA | VCC = 3V, Internal Reference | 5 |
| Supply Current, VCC=5V external reference | ICC | | 160 | 210 | µA | VCC = 5V, VREF = 2.5V, External Reference | 5 |
| Supply Current, VCC=5V internal reference | ICC | | 190 | 260 | µA | VCC = 5V, Internal Reference | 5 |
| Supply Current in Power-Down Mode (C and I grade) | ISD | | 0.6 | 1.8 | µA | VCC = 5V, C-Grade, I-Grade | 5 |
| Full-Scale Voltage Temperature Coefficient (C-Grade) | VFSTC | -10 | | 10 | ppm/°C | VCC = 3V, Internal Ref. (Note 9); C-Grade | 5 |
| Reference Output Voltage (LTC2631-L internal reference) | VREF | 1.24 | 1.25 | 1.26 | V | | 6 |
| Reference Temperature Coefficient | | -10 | | 10 | ppm/°C | | 6 |
| Reference Input Resistance | | 160 | 190 | 220 | kΩ | | 6 |
| Low Level Output Voltage (SDA) | VOL | | | 0.4 | V | Sink Current = 3mA | 6 |
| Output Fall Time | tOF | | | 250 | ns | VO = VIH(MIN) to VO = VIL(MAX), CB = 10pF to 400pF (Note 11) | 6 |
| Pulse Width of Spikes Suppressed by Input Filter | tSP | 0 | | 50 | ns | | 6 |
| Input Leakage | IIN | -1 | | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 6 |
| I/O Pin Capacitance | CIN | | | 10 | pF | (Note 7) | 6 |
| Capacitive Load for Each Bus Line | CB | | | 400 | pF | | 6 |
| External Capacitive Load on Address Pin CAn | CCAn | | | 10 | pF | | 6 |
| Differential Nonlinearity (LTC2631-10) | DNL | -0.5 | | 0.5 | LSB | VCC = 3V, Internal Ref. (Note 3) | 5 |
| Integral Nonlinearity (LTC2631-10) | INL | -1 | 0.2 | 1 | LSB | VCC = 3V, Internal Ref. (Note 3) | 5 |
| Zero-Scale Error (LTC2631-10) | ZSE | | 0.5 | 5 | mV | VCC = 3V, Internal Ref., Code = 0 | 5 |
| Offset Error (LTC2631-10) | VOS | -5 | | 5 | mV | VCC = 3V, Internal Ref. (Note 4) | 5 |
| VOS Temperature Coefficient | VOSTC | -10 | | 10 | µV/°C | VCC = 3V, Internal Ref. (Note 4) | 5 |
| Full-Scale Error | FSE | -0.4 | 0.08 | 0.4 | %FSR | VCC = 3V, Internal Ref. (Note 14) | 5 |
| DAC Output Span (internal reference) | VOUT | 0 | | 2.5 | V | Internal Reference | 6 |
| SCL Clock Frequency | fSCL | 0 | | 400 | kHz | | 7 |
| Hold Time (Repeated) Start Condition | tHD(STA) | 0.6 | | | µs | | 7 |
| Low Period of the SCL Clock Pin | tLOW | 1.3 | | | µs | | 7 |
| High Period of the SCL Clock Pin | tHIGH | 0.6 | | | µs | | 7 |
| Set-Up Time for a Repeated Start Condition | tSU(STA) | 0.6 | | | µs | | 7 |
| Data Hold Time | tHD(DAT) | 0 | | 0.9 | µs | | 7 |
| Data Set-Up Time | tSU(DAT) | 100 | | | ns | | 7 |
| Rise Time of Both SDA and SCL Signals | tr | | | 300 | ns | (Note 11) | 7 |
| Fall Time of Both SDA and SCL Signals | tf | | | 300 | ns | (Note 11) | 7 |
| Set-Up Time for Stop Condition | tSU(STO) | 0.6 | | | µs | | 7 |
| Bus Free Time Between a Stop and Start Condition | tBUF | 1.3 | | | µs | | 7 |
| Settling Time (10-bit, ±0.098%) | tS | | | 3.8 | µs | VCC = 3V (Note 8); ±0.098% (±1LSB at 10-Bits) | 7 |
| Supply Voltage (VCC) absolute maximum | VCC | -0.3 | | 6 | V | All voltages with respect to GND | 2 |
| REF_SEL, SCL, SDA voltage absolute maximum | | -0.3 | | 6 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | (Note 5) | 2 |
| Thermal Resistance Junction-to-Ambient (TS8 8-lead TSOT-23) | θJA | | 195 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LTC2631CTS8-LZ10#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ltc2631cts8-lz10-trmpbf-etched.step` / `ltc2631cts8-lz10-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc2631cts8-lz10-trmpbf.step` / `ltc2631cts8-lz10-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/2631fd.pdf) (28 pp, sha256 `4c98446794069d98`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc2631cts8-lz10-trmpbf-datasheet.pdf)