main
Ray
Publish 0.1.0
7b45122
LTC2451CTS8#TRMPBF
Analog Devices · Analog To Digital Converters (ADCs) · TSOT-23-8
LTC2451CTS8#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 2 | REF- | input | Negative differential reference input; it may be any value between GND and VCC as long as REF+ remains at least 2.5V more positive than REF-. |
| 3 | REF+ | input | Positive differential reference input that, relative to REF-, sets the full-scale range (VREF = REF+ to REF-) and must stay at least 2.5V above REF-. |
| 4 | VCC | power_in | Positive supply voltage, 2.7V to 5.5V, to be bypassed to GND with a 10µF capacitor in parallel with a low series inductance 0.1µF capacitor. |
| 5 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 6 | IN | input | Analog input with a single-ended input range from VREF- to VREF+. |
| 7 | SCL | input | Serial clock input of the I2C interface; the LTC2451 acts only as a slave and accepts only an external serial clock. |
| 8 | SDA | bidirectional | Bidirectional I2C serial data line; high impedance unless in data output mode, when it is an open-drain pull-down requiring an external 1.7k pull-up to VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | 2 | 10 | LSB | l | 3 | ||
| Offset Error 30Hz Mode | 0.08 | 0.5 | mV | l | 2 | ||
| Offset Error 60Hz Mode | 0.5 | 2 | mV | l | 2 | ||
| Gain Error | 0.01 | 0.02 | % of FS | l | 2 | ||
| Conversion Time 30Hz Mode | tCONV | 26 | 33.2 | 46 | ms | l | 3 |
| Conversion Time 60Hz Mode | tCONV | 13 | 16.6 | 23 | ms | l | 3 |
| SCL Clock Frequency | fSCL | 0 | 400 | kHz | l | 3 | |
| Data Hold Time | tHD(DAT) | 0 | 0.9 | µs | l | 3 | |
| Rise Time for SDA/SCL Signals | tr | 300 | ns | 20 + 0.1CB min, CB in pF (Note 6) | 3 | ||
| Fall Time for SDA/SCL Signals | tf | 300 | ns | 20 + 0.1CB min, CB in pF (Note 6) | 3 | ||
| Output Fall Time | tOF | 250 | ns | VIH(MIN) to VIL(MAX), Bus Load CB 10pF to 400pF (Note 6) | 4 | ||
| Supply Voltage | VCC | 2.7 | 5.5 | V | l | 3 | |
| Supply Current Conversion | ICC | 400 | 700 | µA | l | 3 | |
| Supply Current Sleep | ICC | 0.2 | 0.5 | µA | l | 3 | |
| Low Level Output Voltage (SDA) | VOL | 0.4 | V | I = 3mA | 3 | ||
| Input Leakage | IIN | -1 | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 3 | |
| Capacitance for Each I/O Pin | CI | 10 | pF | l | 3 | ||
| Capacitance Load for Each Bus Line | CB | 400 | pF | l | 3 | ||
| IN DC Leakage Current | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = GND (Note 8) | 3 |
| REF+, REF- DC Leakage Current | IDC_LEAK(REF+, REF-) | -10 | 1 | 10 | nA | VREF = 5V (Note 8) | 3 |
| Supply Voltage | VCC | -0.3 | 6 | V | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature (C/I grade) | TJMAX | 125 | °C | TS8 package, C/I grade | 2 | ||
| Operating Temperature Range LTC2451C | 0 | 70 | °C | LTC2451C | 2 | ||
| Thermal Resistance Junction to Ambient (TS8) | θJA | 140 | °C/W | TS8 package, C/I grade | 2 |
CAD (KiCad official)
- Symbol:
LTC2451CTS8#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ltc2451cts8-trmpbf-etched.step/ltc2451cts8-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2451cts8-trmpbf.step/ltc2451cts8-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
5e3eba71951e62a0, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC2451CTS8#TRMPBF
**Analog Devices** · Analog To Digital Converters (ADCs) · TSOT-23-8
LTC2451CTS8#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 2 | REF- | input | Negative differential reference input; it may be any value between GND and VCC as long as REF+ remains at least 2.5V more positive than REF-. |
| 3 | REF+ | input | Positive differential reference input that, relative to REF-, sets the full-scale range (VREF = REF+ to REF-) and must stay at least 2.5V above REF-. |
| 4 | VCC | power_in | Positive supply voltage, 2.7V to 5.5V, to be bypassed to GND with a 10µF capacitor in parallel with a low series inductance 0.1µF capacitor. |
| 5 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 6 | IN | input | Analog input with a single-ended input range from VREF- to VREF+. |
| 7 | SCL | input | Serial clock input of the I2C interface; the LTC2451 acts only as a slave and accepts only an external serial clock. |
| 8 | SDA | bidirectional | Bidirectional I2C serial data line; high impedance unless in data output mode, when it is an open-drain pull-down requiring an external 1.7k pull-up to VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | | | 2 | 10 | LSB | l | 3 |
| Offset Error 30Hz Mode | | | 0.08 | 0.5 | mV | l | 2 |
| Offset Error 60Hz Mode | | | 0.5 | 2 | mV | l | 2 |
| Gain Error | | | 0.01 | 0.02 | % of FS | l | 2 |
| Conversion Time 30Hz Mode | tCONV | 26 | 33.2 | 46 | ms | l | 3 |
| Conversion Time 60Hz Mode | tCONV | 13 | 16.6 | 23 | ms | l | 3 |
| SCL Clock Frequency | fSCL | 0 | | 400 | kHz | l | 3 |
| Data Hold Time | tHD(DAT) | 0 | | 0.9 | µs | l | 3 |
| Rise Time for SDA/SCL Signals | tr | | | 300 | ns | 20 + 0.1CB min, CB in pF (Note 6) | 3 |
| Fall Time for SDA/SCL Signals | tf | | | 300 | ns | 20 + 0.1CB min, CB in pF (Note 6) | 3 |
| Output Fall Time | tOF | | | 250 | ns | VIH(MIN) to VIL(MAX), Bus Load CB 10pF to 400pF (Note 6) | 4 |
| Supply Voltage | VCC | 2.7 | | 5.5 | V | l | 3 |
| Supply Current Conversion | ICC | | 400 | 700 | µA | l | 3 |
| Supply Current Sleep | ICC | | 0.2 | 0.5 | µA | l | 3 |
| Low Level Output Voltage (SDA) | VOL | | | 0.4 | V | I = 3mA | 3 |
| Input Leakage | IIN | -1 | | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 3 |
| Capacitance for Each I/O Pin | CI | | | 10 | pF | l | 3 |
| Capacitance Load for Each Bus Line | CB | | | 400 | pF | l | 3 |
| IN DC Leakage Current | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = GND (Note 8) | 3 |
| REF+, REF- DC Leakage Current | IDC_LEAK(REF+, REF-) | -10 | 1 | 10 | nA | VREF = 5V (Note 8) | 3 |
| Supply Voltage | VCC | -0.3 | | 6 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Junction Temperature (C/I grade) | TJMAX | | | 125 | °C | TS8 package, C/I grade | 2 |
| Operating Temperature Range LTC2451C | | 0 | | 70 | °C | LTC2451C | 2 |
| Thermal Resistance Junction to Ambient (TS8) | θJA | | 140 | | °C/W | TS8 package, C/I grade | 2 |
## CAD (KiCad official)
- Symbol: `LTC2451CTS8#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ltc2451cts8-trmpbf-etched.step` / `ltc2451cts8-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc2451cts8-trmpbf.step` / `ltc2451cts8-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/2451fg.pdf) (20 pp, sha256 `5e3eba71951e62a0`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc2451cts8-trmpbf-datasheet.pdf)