main
Ray
Publish 0.1.0
b33cfca
LTC1799IS5#TRMPBF
Analog Devices · Timers / Clock Oscillators · TSOT-23-5
LTC1799IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Voltage supply pin for 2.7V to 5.5V operation, which must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor. |
| 2 | GND | power_in | Ground pin that should be tied to a ground plane for best performance. |
| 3 | SET | input | Frequency-setting resistor input where the resistor between SET and V+ sets the oscillator frequency; the SET voltage is held about 1.13V below V+, so a precision metal film resistor of 10k to 200k should be used and the capacitance on this pin limited to less than 10pF. |
| 4 | DIV | input | Three-state divider-setting input that selects ÷1 when tied to GND, ÷10 when floated, and ÷100 when tied to V+, and a floating pin should preferably be bypassed with 1nF to ground. |
| 5 | OUT | output | Oscillator output that can drive 5kΩ and/or 10pF loads, with current into or out of the pin limited to 50mA to avoid latchup. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Clock and Timing |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy (5kHz ≤ f ≤ 20MHz, LTC1799I/H) | ∆f | -2.5 | 2.5 | % | V+ = 5V, 5kHz ≤ f ≤ 20MHz, LTC1799I/H | 3 | |
| Frequency Accuracy (1kHz ≤ f ≤ 5kHz) | ∆f | -1.5 | 1.5 | % | V+ = 5V, 1kHz ≤ f ≤ 5kHz | 3 | |
| Frequency Accuracy (20MHz ≤ f ≤ 33MHz) | ∆f | -2 | 2 | % | V+ = 5V, 20MHz ≤ f ≤ 33MHz | 3 | |
| Frequency Accuracy (5kHz ≤ f ≤ 10MHz, LTC1799I/H) | ∆f | -2.5 | 2.5 | % | V+ = 3V, 5kHz ≤ f ≤ 10MHz, LTC1799I/H | 3 | |
| Frequency Accuracy (1kHz ≤ f ≤ 5kHz, 3V) | ∆f | -1.5 | 1.5 | % | V+ = 3V, 1kHz ≤ f ≤ 5kHz | 3 | |
| Frequency Accuracy (10MHz ≤ f ≤ 20MHz) | ∆f | -2 | 2 | % | V+ = 3V, 10MHz ≤ f ≤ 20MHz | 3 | |
| Frequency-Setting Resistor Range (5V) | RSET | 5 | 200 | kΩ | /∆f/ < 1.5%, V+ = 5V | 3 | |
| Frequency-Setting Resistor Range (3V) | RSET | 10 | 200 | kΩ | /∆f/ < 1.5%, V+ = 3V | 3 | |
| Maximum Frequency (5V) | fMAX | 33 | MHz | /∆f/ < 2.5%, Pin 4 = 0V, V+ = 5V | 3 | ||
| Maximum Frequency (3V) | fMAX | 20 | MHz | /∆f/ < 2.5%, Pin 4 = 0V, V+ = 3V | 3 | ||
| Minimum Frequency | fMIN | 1 | kHz | /∆f/ < 2.5%, Pin 4 = V+ | 3 | ||
| Freq Drift Over Temp | ∆f/∆T | -0.004 | 0.004 | %/°C | RSET = 31.6k | 3 | |
| Freq Drift Over Supply | ∆f/∆V | 0.05 | 0.1 | %/V | V+ = 3V to 5V, RSET = 31.6k | 3 | |
| Duty Cycle (DIV by 100 or 10) | Duty Cycle | 49 | 51 | % | Pin 4 = V+ or Open (DIV either by 100 or 10) | 3 | |
| Duty Cycle (DIV by 1) | Duty Cycle | 45 | 55 | % | Pin 4 = 0V (DIV by 1), RSET = 5k to 200k | 3 | |
| Operating Supply Range | V+ | 2.7 | 5.5 | V | 3 | ||
| Power Supply Current (RSET=200k) | IS | 0.7 | 1.1 | mA | RSET = 200k, Pin 4 = V+, RL = ∞, V+ = 5V | 3 | |
| Power Supply Current (RSET=10k, 5V) | IS | 2.4 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 5V | 3 | ||
| Power Supply Current (RSET=10k, 3V) | IS | 2 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 3V | 3 | ||
| Low Level DIV Input Voltage | VIL | 0.5 | V | 3 | |||
| DIV Input Current (Pin 4 = V+) | IDIV | -8 | -5 | µA | Pin 4 = V+, V+ = 5V | 3 | |
| DIV Input Current (Pin 4 = 0V) | IDIV | 5 | 8 | µA | Pin 4 = 0V, V+ = 5V | 3 | |
| High Level Output Voltage (5V, 1mA) | VOH | 4.8 | 4.95 | V | V+ = 5V, LTC1799C/I, IOH = -1mA | 4 | |
| High Level Output Voltage (5V, 4mA) | VOH | 4.5 | 4.8 | V | V+ = 5V, LTC1799C/I, IOH = -4mA | 4 | |
| High Level Output Voltage (3V, 1mA) | VOH | 2.7 | 2.9 | V | V+ = 3V, LTC1799C/I, IOH = -1mA | 4 | |
| High Level Output Voltage (3V, 4mA) | VOH | 2.2 | 2.6 | V | V+ = 3V, LTC1799C/I, IOH = -4mA | 4 | |
| Low Level Output Voltage (5V, 1mA) | VOL | 0.05 | 0.15 | V | V+ = 5V, LTC1799C/I, IOL = 1mA | 4 | |
| Low Level Output Voltage (5V, 4mA) | VOL | 0.2 | 0.4 | V | V+ = 5V, LTC1799C/I, IOL = 4mA | 4 | |
| Low Level Output Voltage (3V, 1mA) | VOL | 0.1 | 0.3 | V | V+ = 3V, LTC1799C/I, IOL = 1mA | 4 | |
| Low Level Output Voltage (3V, 4mA) | VOL | 0.4 | 0.7 | V | V+ = 3V, LTC1799C/I, IOL = 4mA | 4 | |
| Operating Temperature Range (LTC1799I) | TA | -40 | 85 | °C | LTC1799I | 2 | |
| Supply Voltage (V+) to GND | V+ | -0.3 | 6 | V | to GND | 2 | |
| DIV to GND | DIV | -0.3 | V | to GND; upper limit printed as (V+ + 0.3V) | 2 | ||
| SET to GND | SET | -0.3 | V | to GND; upper limit printed as (V+ + 0.3V) | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 300 | °C | 10 sec soldering | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient | θJA | 256 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LTC1799IS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc1799is5-trmpbf-etched.step/ltc1799is5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1799is5-trmpbf.step/ltc1799is5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
ce4553360ca47502, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC1799IS5#TRMPBF
**Analog Devices** · Timers / Clock Oscillators · TSOT-23-5
LTC1799IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Voltage supply pin for 2.7V to 5.5V operation, which must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor. |
| 2 | GND | power_in | Ground pin that should be tied to a ground plane for best performance. |
| 3 | SET | input | Frequency-setting resistor input where the resistor between SET and V+ sets the oscillator frequency; the SET voltage is held about 1.13V below V+, so a precision metal film resistor of 10k to 200k should be used and the capacitance on this pin limited to less than 10pF. |
| 4 | DIV | input | Three-state divider-setting input that selects ÷1 when tied to GND, ÷10 when floated, and ÷100 when tied to V+, and a floating pin should preferably be bypassed with 1nF to ground. |
| 5 | OUT | output | Oscillator output that can drive 5kΩ and/or 10pF loads, with current into or out of the pin limited to 50mA to avoid latchup. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Clock and Timing |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy (5kHz ≤ f ≤ 20MHz, LTC1799I/H) | ∆f | -2.5 | | 2.5 | % | V+ = 5V, 5kHz ≤ f ≤ 20MHz, LTC1799I/H | 3 |
| Frequency Accuracy (1kHz ≤ f ≤ 5kHz) | ∆f | -1.5 | | 1.5 | % | V+ = 5V, 1kHz ≤ f ≤ 5kHz | 3 |
| Frequency Accuracy (20MHz ≤ f ≤ 33MHz) | ∆f | -2 | | 2 | % | V+ = 5V, 20MHz ≤ f ≤ 33MHz | 3 |
| Frequency Accuracy (5kHz ≤ f ≤ 10MHz, LTC1799I/H) | ∆f | -2.5 | | 2.5 | % | V+ = 3V, 5kHz ≤ f ≤ 10MHz, LTC1799I/H | 3 |
| Frequency Accuracy (1kHz ≤ f ≤ 5kHz, 3V) | ∆f | -1.5 | | 1.5 | % | V+ = 3V, 1kHz ≤ f ≤ 5kHz | 3 |
| Frequency Accuracy (10MHz ≤ f ≤ 20MHz) | ∆f | -2 | | 2 | % | V+ = 3V, 10MHz ≤ f ≤ 20MHz | 3 |
| Frequency-Setting Resistor Range (5V) | RSET | 5 | | 200 | kΩ | /∆f/ < 1.5%, V+ = 5V | 3 |
| Frequency-Setting Resistor Range (3V) | RSET | 10 | | 200 | kΩ | /∆f/ < 1.5%, V+ = 3V | 3 |
| Maximum Frequency (5V) | fMAX | | | 33 | MHz | /∆f/ < 2.5%, Pin 4 = 0V, V+ = 5V | 3 |
| Maximum Frequency (3V) | fMAX | | | 20 | MHz | /∆f/ < 2.5%, Pin 4 = 0V, V+ = 3V | 3 |
| Minimum Frequency | fMIN | 1 | | | kHz | /∆f/ < 2.5%, Pin 4 = V+ | 3 |
| Freq Drift Over Temp | ∆f/∆T | -0.004 | | 0.004 | %/°C | RSET = 31.6k | 3 |
| Freq Drift Over Supply | ∆f/∆V | | 0.05 | 0.1 | %/V | V+ = 3V to 5V, RSET = 31.6k | 3 |
| Duty Cycle (DIV by 100 or 10) | Duty Cycle | 49 | | 51 | % | Pin 4 = V+ or Open (DIV either by 100 or 10) | 3 |
| Duty Cycle (DIV by 1) | Duty Cycle | 45 | | 55 | % | Pin 4 = 0V (DIV by 1), RSET = 5k to 200k | 3 |
| Operating Supply Range | V+ | 2.7 | | 5.5 | V | | 3 |
| Power Supply Current (RSET=200k) | IS | | 0.7 | 1.1 | mA | RSET = 200k, Pin 4 = V+, RL = ∞, V+ = 5V | 3 |
| Power Supply Current (RSET=10k, 5V) | IS | | | 2.4 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 5V | 3 |
| Power Supply Current (RSET=10k, 3V) | IS | | | 2 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 3V | 3 |
| Low Level DIV Input Voltage | VIL | | | 0.5 | V | | 3 |
| DIV Input Current (Pin 4 = V+) | IDIV | -8 | | -5 | µA | Pin 4 = V+, V+ = 5V | 3 |
| DIV Input Current (Pin 4 = 0V) | IDIV | 5 | | 8 | µA | Pin 4 = 0V, V+ = 5V | 3 |
| High Level Output Voltage (5V, 1mA) | VOH | 4.8 | | 4.95 | V | V+ = 5V, LTC1799C/I, IOH = -1mA | 4 |
| High Level Output Voltage (5V, 4mA) | VOH | 4.5 | | 4.8 | V | V+ = 5V, LTC1799C/I, IOH = -4mA | 4 |
| High Level Output Voltage (3V, 1mA) | VOH | 2.7 | | 2.9 | V | V+ = 3V, LTC1799C/I, IOH = -1mA | 4 |
| High Level Output Voltage (3V, 4mA) | VOH | 2.2 | | 2.6 | V | V+ = 3V, LTC1799C/I, IOH = -4mA | 4 |
| Low Level Output Voltage (5V, 1mA) | VOL | 0.05 | | 0.15 | V | V+ = 5V, LTC1799C/I, IOL = 1mA | 4 |
| Low Level Output Voltage (5V, 4mA) | VOL | 0.2 | | 0.4 | V | V+ = 5V, LTC1799C/I, IOL = 4mA | 4 |
| Low Level Output Voltage (3V, 1mA) | VOL | 0.1 | | 0.3 | V | V+ = 3V, LTC1799C/I, IOL = 1mA | 4 |
| Low Level Output Voltage (3V, 4mA) | VOL | 0.4 | | 0.7 | V | V+ = 3V, LTC1799C/I, IOL = 4mA | 4 |
| Operating Temperature Range (LTC1799I) | TA | -40 | | 85 | °C | LTC1799I | 2 |
| Supply Voltage (V+) to GND | V+ | -0.3 | | 6 | V | to GND | 2 |
| DIV to GND | DIV | -0.3 | | | V | to GND; upper limit printed as (V+ + 0.3V) | 2 |
| SET to GND | SET | -0.3 | | | V | to GND; upper limit printed as (V+ + 0.3V) | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | TLEAD | | | 300 | °C | 10 sec soldering | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Thermal Resistance, Junction to Ambient | θJA | | 256 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LTC1799IS5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ltc1799is5-trmpbf-etched.step` / `ltc1799is5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc1799is5-trmpbf.step` / `ltc1799is5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LTC1799.pdf) (14 pp, sha256 `ce4553360ca47502`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc1799is5-trmpbf-datasheet.pdf)