Generated by kicad-footprint-generator · KiCad file format 20260206
LTC1799HS5#WTRMPBF
Analog Devices · Timers · TSOT-23-5
LTC1799HS5#WTRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Voltage supply (2.7V ≤ V+ ≤ 5.5V) that must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor. |
| 2 | GND | power_in | Ground, which should be tied to a ground plane for best performance. |
| 3 | SET | passive | Frequency-setting resistor input: the resistor between this pin and V+ sets the oscillator frequency, the pin is held about 1.13V below V+, use a 10k to 200k precision metal film resistor and keep capacitance below 10pF. |
| 4 | DIV | input | Three-state divider-setting input: GND selects ÷1, floating selects ÷10, V+ selects ÷100, and driving it high or low requires sourcing or sinking approximately 5µA. |
| 5 | OUT | output | Oscillator output that can drive 5kΩ and/or 10pF loads, and will not latch up if current into/out of the pin is limited to 50mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Clock And Timing |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy | Δf | -1.5 | 1.5 | % | V+ = 5V, 5kHz ≤ f ≤ 20MHz | 3 | |
| Frequency Accuracy (LTC1799I/H) | Δf | -2.5 | 2.5 | % | V+ = 5V, 5kHz ≤ f ≤ 20MHz, LTC1799I/H | 3 | |
| Frequency Accuracy low range | Δf | -2.5 | 2.5 | % | V+ = 5V, 1kHz ≤ f ≤ 5kHz | 3 | |
| Frequency Accuracy high range | Δf | -2.5 | 2.5 | % | V+ = 5V, 20MHz ≤ f ≤ 33MHz | 3 | |
| Frequency-Setting Resistor Range | RSET | 5 | 200 | kΩ | /Δf/ < 1.5%, V+ = 5V | 3 | |
| Frequency-Setting Resistor Range | RSET | 10 | 200 | kΩ | /Δf/ < 1.5%, V+ = 3V | 3 | |
| Freq Drift Over Supply | Δf/ΔV | 0.05 | 0.1 | %/V | V+ = 3V to 5V, RSET = 31.6k | 3 | |
| Duty Cycle | 49 | 50 | 51 | % | Pin 4 = V+ or Open (DIV Either by 100 or 10) | 3 | |
| Duty Cycle | 45 | 50 | 55 | % | Pin 4 = 0V (DIV by 1), RSET = 5k to 200k | 3 | |
| Operating Supply Range | V+ | 2.7 | 5.5 | V | 3 | ||
| Power Supply Current | IS | 0.7 | 1.1 | mA | RSET = 200k, Pin 4 = V+, RL = ∞, V+ = 5V | 3 | |
| Low Level DIV Input Voltage | VIL | 0.5 | V | 3 | |||
| DIV Input Current | IDIV | 5 | 8 | µA | Pin 4 = V+, V+ = 5V | 3 | |
| DIV Input Current | IDIV | -8 | -5 | µA | Pin 4 = 0V, V+ = 5V | 3 | |
| High Level Output Voltage | VOH | 4.75 | 4.95 | V | V+ = 5V, LTC1799H, IOH = -1mA | 4 | |
| High Level Output Voltage | VOH | 4.4 | 4.75 | V | V+ = 5V, LTC1799H, IOH = -4mA | 4 | |
| High Level Output Voltage | VOH | 2.65 | 2.9 | V | V+ = 3V, LTC1799H, IOH = -1mA | 4 | |
| High Level Output Voltage | VOH | 2.1 | 2.55 | V | V+ = 3V, LTC1799H, IOH = -4mA | 4 | |
| Low Level Output Voltage | VOL | 0.05 | 0.2 | V | V+ = 5V, LTC1799H, IOL = 1mA | 4 | |
| Low Level Output Voltage | VOL | 0.25 | 0.5 | V | V+ = 5V, LTC1799H, IOL = 4mA | 4 | |
| Low Level Output Voltage | VOL | 0.1 | 0.35 | V | V+ = 3V, LTC1799H, IOL = 1mA | 4 | |
| Low Level Output Voltage | VOL | 0.45 | 0.8 | V | V+ = 3V, LTC1799H, IOL = 4mA | 4 | |
| Supply Voltage | V+ | -0.3 | 6 | V | V+ to GND | 2 | |
| DIV Voltage | -0.3 | V | DIV to GND, upper limit V+ + 0.3V | 2 | |||
| SET Voltage | -0.3 | V | SET to GND, upper limit V+ + 0.3V | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | LTC1799H | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 256 | °C/W | S5 package, 5-lead TSOT-23 | 2 | ||
| Maximum Frequency | fMAX | 33 | MHz | /Δf/ < 2.5%, Pin 4 = 0V, V+ = 5V | 3 | ||
| Maximum Frequency | fMAX | 20 | MHz | /Δf/ < 2.5%, Pin 4 = 0V, V+ = 3V | 3 | ||
| Minimum Frequency | fMIN | 1 | kHz | /Δf/ < 2.5%, Pin 4 = V+ | 3 | ||
| Freq Drift Over Temp | Δf/ΔT | 0.004 | %/°C | RSET = 31.6k (printed ±0.004) | 3 | ||
| Timing Jitter | 0.06 | % | Pin 4 = V+ | 3 | |||
| Timing Jitter | 0.13 | % | Pin 4 = Open | 3 | |||
| Timing Jitter | 0.4 | % | Pin 4 = 0V | 3 | |||
| Long-Term Stability of Output Frequency | 300 | ppm/√kHr | 3 | ||||
| Power Supply Current | IS | 2.4 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 5V | 3 | ||
| Power Supply Current | IS | 2 | mA | RSET = 10k, Pin 4 = 0V, RL = ∞, V+ = 3V | 3 | ||
| OUT Rise Time | tr | 14 | ns | V+ = 5V, Pin 4 = V+ or Floating, RL = ∞ | 4 | ||
| OUT Rise Time | tr | 7 | ns | V+ = 5V, Pin 4 = 0V, RL = ∞ | 4 | ||
| OUT Rise Time | tr | 19 | ns | V+ = 3V, Pin 4 = V+ or Floating, RL = ∞ | 4 | ||
| OUT Rise Time | tr | 11 | ns | V+ = 3V, Pin 4 = 0V, RL = ∞ | 4 | ||
| OUT Fall Time | tf | 13 | ns | V+ = 5V, Pin 4 = V+ or Floating, RL = ∞ | 4 | ||
| OUT Fall Time | tf | 6 | ns | V+ = 5V, Pin 4 = 0V, RL = ∞ | 4 | ||
| OUT Fall Time | tf | 19 | ns | V+ = 3V, Pin 4 = V+ or Floating, RL = ∞ | 4 | ||
| OUT Fall Time | tf | 10 | ns | V+ = 3V, Pin 4 = 0V, RL = ∞ | 4 |
CAD (KiCad official)
- Symbol:
LTC1799HS5#WTRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc1799hs5-wtrmpbf-etched.step/ltc1799hs5-wtrmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1799hs5-wtrmpbf.step/ltc1799hs5-wtrmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
ce4553360ca47502, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).