main
Ray
Publish 0.1.0
6d4fdc4
LTC1728ES5-5#TRMPBF
Analog Devices · Monitors & Reset Circuits · TSOT-23-5
LTC1728ES5-5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output with weak 6µA pull-up to VCC3, asserted when any supply is below its trip threshold and held for 200ms after all supplies become valid; can be pulled above VCC3 for 5V logic. |
| 2 | GND | power_in | Ground. |
| 3 | VCCA | power_in | 1V sense high-impedance input (threshold 1.000V typ); if unused, tie to VCC3 or VCC5. |
| 4 | VCC5 | power_in | 5V sense input and power supply pin (threshold 4.675V typ) that powers the part when its voltage is greater than VCC3; bypass to ground with a ≥0.1µF ceramic capacitor. |
| 5 | VCC3 | power_in | 3.3V sense input and power supply pin (threshold 3.086V typ) that powers the part when its voltage is greater than VCC5; bypass to ground with a ≥0.1µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold VCC3 | VRT3 | 3.036 | 3.086 | 3.135 | V | VCC3 Input Threshold | 3 |
| Reset Threshold VCC5 | VRT5 | 4.6 | 4.675 | 4.75 | V | VCC5 Input Threshold (5V Version) | 3 |
| Reset Threshold VCCA | VRTA | 0.985 | 1 | 1.015 | V | VCCA Input Threshold | 3 |
| VCC3, VCC5/VCC25 Operating Voltage | VCCOP | 1 | 7 | V | RST, COMP3, COMP5, COMP25 in Correct Logic State | 3 | |
| VCC3, VCC5/VCC25 Operating Voltage (COMPA) | VCCOPA | 2 | 2.3 | V | Minimum Supply Voltage to Guarantee COMPA in Correct Logic State | 3 | |
| VCC3 Supply Current | IVCC3 | 1 | 2 | µA | VCC5/VCC25 > VCC3 | 3 | |
| VCC3 Supply Current | IVCC3 | 10 | 20 | µA | VCC5/VCC25 < VCC3, VCC3 = 3.3V (Note 4) | 3 | |
| VCC5 Supply Current | IVCC5 | 10 | 20 | µA | VCC5 = 5V, VCC3 < VCC5 | 3 | |
| VCCA Input Current | IVCCA | -15 | 0 | 15 | nA | VCCA = 1V | 3 |
| VCCA Input Current | IVCCA | -20 | 0 | 50 | nA | -40°C < TA < 125°C | 3 |
| Reset Pulse Width | tRST | 140 | 200 | 280 | ms | RST Low with 10k Pull-Up to VCC3 (Note 5) | 3 |
| Reset Pulse Width | tRST | 140 | 350 | ms | -40°C < TA < 125°C | 3 | |
| VCC Undervoltage Detect to RST or COMPX | tUV | 110 | µs | VCC5, VCC25, VCC3 or VCCA Less Than Reset Threshold VRT by More Than 1% (Note 5) | 3 | ||
| Output Voltage Low, RST, COMPX | VOL | 0.15 | 0.4 | V | ISINK = 2.5mA, VCC3 = 3V, VCC5/VCC25 = 0V | 3 | |
| Output Voltage Low, RST, COMPX | VOL | 0.05 | 0.3 | V | ISINK = 100µA, VCC3 = 1V, VCC5/VCC25 = 0V | 3 | |
| VCC5 Reset Override Voltage | VOVR | -0.025 | 0.025 | V | Override VCC5 Ability to Assert RST; VCC3 ±0.025 V (Note 7) | 3 | |
| Supply and RST pin voltage | -0.3 | 7 | V | VCC3, VCC5/VCC25/VCC18, VCCA, RST | 2 | ||
| Operating Temperature Range (E grade) | -40 | 85 | °C | LTC1728E | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | S5 package | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 250 | °C/W | S5 package, 5-lead SOT-23 | 2 |
CAD (KiCad official)
- Symbol:
LTC1728ES5-5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc1728es5-5-trmpbf-etched.step/ltc1728es5-5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1728es5-5-trmpbf.step/ltc1728es5-5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
1924a21fcaddbcef, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC1728ES5-5#TRMPBF
**Analog Devices** · Monitors & Reset Circuits · TSOT-23-5
LTC1728ES5-5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output with weak 6µA pull-up to VCC3, asserted when any supply is below its trip threshold and held for 200ms after all supplies become valid; can be pulled above VCC3 for 5V logic. |
| 2 | GND | power_in | Ground. |
| 3 | VCCA | power_in | 1V sense high-impedance input (threshold 1.000V typ); if unused, tie to VCC3 or VCC5. |
| 4 | VCC5 | power_in | 5V sense input and power supply pin (threshold 4.675V typ) that powers the part when its voltage is greater than VCC3; bypass to ground with a ≥0.1µF ceramic capacitor. |
| 5 | VCC3 | power_in | 3.3V sense input and power supply pin (threshold 3.086V typ) that powers the part when its voltage is greater than VCC5; bypass to ground with a ≥0.1µF ceramic capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold VCC3 | VRT3 | 3.036 | 3.086 | 3.135 | V | VCC3 Input Threshold | 3 |
| Reset Threshold VCC5 | VRT5 | 4.6 | 4.675 | 4.75 | V | VCC5 Input Threshold (5V Version) | 3 |
| Reset Threshold VCCA | VRTA | 0.985 | 1 | 1.015 | V | VCCA Input Threshold | 3 |
| VCC3, VCC5/VCC25 Operating Voltage | VCCOP | 1 | | 7 | V | RST, COMP3, COMP5, COMP25 in Correct Logic State | 3 |
| VCC3, VCC5/VCC25 Operating Voltage (COMPA) | VCCOPA | | 2 | 2.3 | V | Minimum Supply Voltage to Guarantee COMPA in Correct Logic State | 3 |
| VCC3 Supply Current | IVCC3 | | 1 | 2 | µA | VCC5/VCC25 > VCC3 | 3 |
| VCC3 Supply Current | IVCC3 | | 10 | 20 | µA | VCC5/VCC25 < VCC3, VCC3 = 3.3V (Note 4) | 3 |
| VCC5 Supply Current | IVCC5 | | 10 | 20 | µA | VCC5 = 5V, VCC3 < VCC5 | 3 |
| VCCA Input Current | IVCCA | -15 | 0 | 15 | nA | VCCA = 1V | 3 |
| VCCA Input Current | IVCCA | -20 | 0 | 50 | nA | -40°C < TA < 125°C | 3 |
| Reset Pulse Width | tRST | 140 | 200 | 280 | ms | RST Low with 10k Pull-Up to VCC3 (Note 5) | 3 |
| Reset Pulse Width | tRST | 140 | | 350 | ms | -40°C < TA < 125°C | 3 |
| VCC Undervoltage Detect to RST or COMPX | tUV | | 110 | | µs | VCC5, VCC25, VCC3 or VCCA Less Than Reset Threshold VRT by More Than 1% (Note 5) | 3 |
| Output Voltage Low, RST, COMPX | VOL | | 0.15 | 0.4 | V | ISINK = 2.5mA, VCC3 = 3V, VCC5/VCC25 = 0V | 3 |
| Output Voltage Low, RST, COMPX | VOL | | 0.05 | 0.3 | V | ISINK = 100µA, VCC3 = 1V, VCC5/VCC25 = 0V | 3 |
| VCC5 Reset Override Voltage | VOVR | -0.025 | | 0.025 | V | Override VCC5 Ability to Assert RST; VCC3 ±0.025 V (Note 7) | 3 |
| Supply and RST pin voltage | | -0.3 | | 7 | V | VCC3, VCC5/VCC25/VCC18, VCCA, RST | 2 |
| Operating Temperature Range (E grade) | | -40 | | 85 | °C | LTC1728E | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | S5 package | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 250 | | °C/W | S5 package, 5-lead SOT-23 | 2 |
## CAD (KiCad official)
- Symbol: `LTC1728ES5-5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ltc1728es5-5-trmpbf-etched.step` / `ltc1728es5-5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc1728es5-5-trmpbf.step` / `ltc1728es5-5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LTC1727-1728.pdf) (18 pp, sha256 `1924a21fcaddbcef`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc1728es5-5-trmpbf-datasheet.pdf)