Generated by kicad-footprint-generator · KiCad file format 20260206
LTC1696ES6#TRMPBF
Analog Devices · Monitors & Reset Circuits · TSOT-23-6
LTC1696ES6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB1 | input | First feedback input that senses the first output voltage through an external divider and compares it with an internal 0.88V reference; a higher feedback overdrive gives a faster OUT response. |
| 2 | GND | power_in | Power ground that provides the return path for all device currents. |
| 3 | VCC | power_in | Supply input with a specified operating range of 2.7V to 27V; quiescent current is typically 100µA in standby at 5V and increases to 170µA at 12V, and VCC below the 1.94V undervoltage lockout resets the OUT latch. |
| 4 | OUT | output | Output current limit driver that is normally low in standby, latches active high on an overvoltage fault, and delivers typically 80mA continuous at high supply voltage, with output current decreasing at lower supply voltage. |
| 5 | FB2 | input | Second feedback input that senses the second output voltage through an external divider and compares it with an internal 0.88V reference; a higher feedback overdrive gives a faster OUT response. |
| 6 | TIMER/RESET | bidirectional | Glitch filter timer capacitor connection, reset input (pulling low clears the OUT latch, and the reset should be open-drain), and external trigger input (driving high latches OUT active while the feedback inputs are below threshold); the absolute maximum input voltage is -0.3V to 17V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply Voltage Range | VCC | 2.7 | 27 | V | Operating Range | 2 | |
| Standby Supply Current | IVCC | 170 | 540 | µA | FB1, FB2 < VFB | 2 | |
| Active Supply Current | IVCC | 1.1 | 3.5 | mA | FB1, FB2 > VFB, COUT = 1000pF | 2 | |
| FB1, FB2 Input Current | IFB | -1 | -0.05 | µA | 2 | ||
| FB1, FB2 Feedback Threshold Voltage Going Positive (E grade, TA >= 0 C and TA <= 85 C) | VFB | 0.862 | 0.88 | 0.898 | V | TA ≥ 0°C and TA ≤ 85°C | 2 |
| VCC Undervoltage Lockout Low-to-High Transition | VLKO | 1.75 | 2.05 | 2.35 | V | FB1, FB2 > VFB | 2 |
| VCC Undervoltage Lockout High-to-Low Transition | VLKO | 1.64 | 1.94 | 2.24 | V | FB1, FB2 > VFB | 2 |
| TIMER/RESET Reset Low Threshold | VRST | 0.78 | 0.865 | 0.95 | V | FB1, FB2 > VFB | 2 |
| TIMER/RESET Timer High Threshold | VTIM | 1.11 | 1.185 | 1.26 | V | FB1, FB2 > VFB, TA ≤ 85°C | 2 |
| TIMER/RESET External Trigger High Threshold | VTRIG | 1.35 | 1.5 | 1.65 | V | FB1, FB2 < VFB | 3 |
| TIMER/RESET External Trigger High Current | ITRIG | 260 | 650 | µA | FB1, FB2 < VFB, TIMER/RESET = VTRIG | 3 | |
| TIMER/RESET Timer Current | ITIM | 4 | 10 | 22 | µA | FB1 = (VFB + 30mV), FB2 < VFB | 3 |
| TIMER/RESET Timer Current | ITIM | 5 | 12 | 26 | µA | FB1 = (VFB + 200mV), FB2 < VFB | 3 |
| TIMER/RESET Timer Current | ITIM | 8 | 18 | 40 | µA | FB1, FB2 = (VFB + 200mV) | 3 |
| OUT High Voltage | VOUTH | 4.8 | 6.3 | 8 | V | 12V ≤ VCC ≤ 27V, FB1, FB2 > VFB, COUT = 1000pF | 3 |
| OUT High Voltage | VOUTH | 2.7 | 3.2 | 3.3 | V | VCC = 3.3V, FB1, FB2 > VFB, COUT = 1000pF | 3 |
| OUT Low Voltage | VOUTL | 0.45 | V | FB1, FB2 < VFB, ISINK = 1mA, VCC = 3.3V | 3 | ||
| OUT Propagation Delay for FB1 | tOVPD1 | 7 | 28 | µs | FB1 > VFB, FB2 < VFB, TIMER/RESET = Open, COUT = 1000pF | 3 | |
| OUT Propagation Delay for FB2 | tOVPD2 | 7 | 28 | µs | FB2 > VFB, FB1 < VFB, TIMER/RESET = Open, COUT = 1000pF | 3 | |
| OUT Propagation Delay for FB1, FB2 | tOVPD1,2 | 6 | 24 | µs | FB1, FB2 > VFB, TIMER/RESET = Open, COUT = 1000pF | 3 | |
| OUT Rise Time | tr | 0.4 | 3 | µs | FB1, FB2 > VFB, COUT = 1000pF | 3 | |
| OUT Short-Circuit Current | IOUTSC | 35 | 80 | 160 | mA | 12V ≤ VCC ≤ 27V, FB1, FB2 > VFB, VOUT Shorted to GND | 3 |
| OUT Short-Circuit Current | IOUTSC | 2 | 9 | 18 | mA | VCC = 2.7V, FB1, FB2 > VFB, VOUT Shorted to GND | 3 |
| Supply Voltage (VCC) | VCC | 28 | V | 2 | |||
| Input Voltage FB1, FB2 | -0.3 | 17 | V | 2 | |||
| Input Voltage TIMER/RESET | -0.3 | 17 | V | 2 | |||
| Operating Junction Temperature Range (LTC1696E) | TJ | -40 | 125 | °C | LTC1696E | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec soldering | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | S6 package | 2 | ||
| Thermal Resistance, Junction to Ambient | θJA | 192 | °C/W | S6 package (6-lead plastic TSOT-23) | 2 |
CAD (KiCad official)
- Symbol:
LTC1696ES6#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ltc1696es6-trmpbf-etched.step/ltc1696es6-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1696es6-trmpbf.step/ltc1696es6-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
6832f1d99cd95aa5, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).