component
LTC1540IMS8#PBF
Public Made by Adomby adom
Analog Devices Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 4d ago |
| ltc1540ims8-pbf-etched.glb | 4d ago |
| ltc1540ims8-pbf-etched.step | 4d ago |
| ltc1540ims8-pbf-hero.glb | 4d ago |
| ltc1540ims8-pbf-hero.overlay.json | 4d ago |
| ltc1540ims8-pbf.glb | 4d ago |
| ltc1540ims8-pbf.kicad_mod | 4d ago |
| ltc1540ims8-pbf.kicad_sym | 4d ago |
| ltc1540ims8-pbf.lbr | 4d ago |
| ltc1540ims8-pbf.step | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
| verification.json | 4d ago |
LTC1540IMS8#PBF
Analog Devices · Comparators · MSOP-8
LTC1540IMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, to be connected to V- for single-supply operation. |
| 2 | V- | power_in | Negative supply, which should be more negative than GND and connected to ground for single-supply operation. |
| 3 | IN+ | input | Noninverting comparator input with common-mode range from V- to V+ - 1.3V and typical input current of 10pA at 25°C. |
| 4 | IN- | input | Inverting comparator input with common-mode range from V- to V+ - 1.3V and typical input current of 10pA at 25°C. |
| 5 | HYST | input | Hysteresis input, connected to REF if not used, with input voltage range from VREF to VREF - 50mV. |
| 6 | REF | output | Reference output of 1.182V with respect to V-, able to source up to 1mA and sink 10µA at 25°C, and to drive a 0.01µF bypass capacitor without oscillation. |
| 7 | V+ | power_in | Positive supply with operating voltage from 2V to 11V. |
| 8 | OUT | output | Comparator CMOS output swinging from GND to V+, able to source up to 40mA and sink 5mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ Supply Voltage Range | V+ | 2 | 11 | V | 3 | ||
| Supply Current | ICC | 0.3 | 0.71 | µA | IN-, IN+ = 80mV, HYST = REF, I-Grade; V+ = 5V | 3 | |
| Supply Current | ICC | 0.28 | 0.64 | µA | IN-, IN+ = 80mV, HYST = REF, I-Grade; V+ = 3V | 4 | |
| Comparator Input Offset Voltage | VOS | -16 | 12 | 16 | mV | VCM = 2.5V; LTC1540CMS8/IMS8; V+ = 5V | 3 |
| Comparator Input Offset Voltage | VOS | -16 | 12 | 16 | mV | VCM = 2.5V; LTC1540CMS8/IMS8; V+ = 3V | 4 |
| Input Leakage Current (IN+, IN-) | IIN | -1 | 0.01 | 1 | nA | VIN+ = VIN- = 2.5V; V+ = 5V | 3 |
| Input Leakage Current (IN+, IN-) | IIN | -1 | 0.01 | 1 | nA | VIN+ = VIN- = 1.5V; V+ = 3V | 4 |
| Input Leakage Current (HYST) | IIN | -1 | 0.02 | 1 | nA | VIN+ = VIN- = 2.5V; V+ = 5V | 3 |
| Input Leakage Current (HYST) | IIN | -1 | 0.02 | 1 | nA | VIN+ = VIN- = 1.5V; V+ = 3V | 4 |
| Common Mode Rejection Ratio | CMRR | 0.1 | 1 | mV/V | V- to V+, 1.3V; V+ = 5V | 3 | |
| Common Mode Rejection Ratio | CMRR | 0.1 | 1 | mV/V | V- to V+, 1.3V; V+ = 3V | 4 | |
| Power Supply Rejection Ratio | PSRR | 0.1 | 1 | mV/V | V+ = 2V to 11V; V+ = 5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 0.1 | 1 | mV/V | V+ = 2V to 11V; V+ = 3V | 4 | |
| Propagation Delay | tPD | 60 | µs | COUT = 100pF, Overdrive = 10mV; V+ = 5V | 3 | ||
| Propagation Delay | tPD | 50 | µs | COUT = 100pF, Overdrive = 100mV; V+ = 5V | 3 | ||
| Propagation Delay | tPD | 70 | µs | COUT = 100pF, Overdrive = 10mV; V+ = 3V | 4 | ||
| Propagation Delay | tPD | 60 | µs | COUT = 100pF, Overdrive = 100mV; V+ = 3V | 4 | ||
| Reference Voltage (Industrial) | VREF | 1.152 | 1.182 | 1.212 | V | No Load; (SO-8)/(MS8)/(DFN) Industrial; V+ = 5V | 3 |
| Reference Voltage (Industrial) | VREF | 1.152 | 1.182 | 1.212 | V | No Load; (SO-8)/(MS8)/(DFN) Industrial; V+ = 3V | 4 |
| Load Regulation (Source) | ΔVREF | 0.5 | 2.5 | mV | 0 ≤ ISOURCE ≤ 100µA; V+ = 5V | 3 | |
| Load Regulation (Source) | ΔVREF | 0.75 | 3.5 | mV | 0 ≤ ISOURCE ≤ 100µA; V+ = 3V | 4 | |
| Load Regulation (Sink) | ΔVREF | 0.5 | 5 | mV | 0 ≤ ISINK ≤ 10µA; V+ = 5V | 3 | |
| Load Regulation (Sink) | ΔVREF | 0.5 | 5 | mV | 0 ≤ ISINK ≤ 10µA; V+ = 3V | 4 | |
| Supply Voltage (V+ to V-, V+ to GND, GND to V-) | -0.3 | 12 | V | V+ to V-, V+ to GND, GND to V- | 2 | ||
| OUT Output Current | 50 | mA | 2 | ||||
| Power Dissipation | 500 | mW | 2 | ||||
| Maximum Junction Temperature | TJMAX | 150 | °C | MS8 package | 2 | ||
| Operating Temperature Range (LTC1540I) | -40 | 85 | °C | LTC1540I | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient | θJA | 250 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LTC1540IMS8#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc1540ims8-pbf-etched.step/ltc1540ims8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1540ims8-pbf.step/ltc1540ims8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
50b9965880829dad, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).