main
Ray Publish 0.1.0 a41515e

LTC1044AIS8#TRPBF

Analog Devices · DC-DC Converters · SO-8

LTC1044AIS8#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOST input Connecting BOOST to V+ raises the internal oscillator frequency by about seven times, and it is left open for normal operation; the pin must stay within -0.3V to V+ + 0.3V (Note 2).
2 CAP+ passive Positive terminal of the external switching capacitor C1 (block diagram pin C+), which is typically 10µF and is not critical in matching, quality or tolerance.
3 GND power_in Ground reference pin; for V+ of 3V or more an internal switch shorts LV (pin 6) to this pin, and it is the output common in the battery splitter application.
4 CAP- passive Negative terminal of the external switching capacitor C1 (block diagram pin C-), connected to the internal switched-capacitor network.
5 VOUT power_out Converter output, which behaves as a nearly ideal voltage source in series with an approximately 80Ω output impedance in the negative voltage converter configuration.
6 LV input Low-voltage supply pin for the internal logic running between V+ and LV, which must be tied to GND for V+ below 3V and may be grounded or floated for V+ of 3V or more; current into this pin is limited to 20µA and its input voltage must stay within -0.3V to V+ + 0.3V.
7 OSC input Oscillator control pin where added capacitance lowers the switching frequency and an external clock can drive it (with the boost pin left open); its input must stay within -0.3V to V+ + 0.3V, and the internal oscillator can be disabled by tying it to GND or V+ to save power.
8 V+ power_in Positive supply input with a 1.5V minimum and 12V maximum operating range (13V absolute maximum), which also powers the internal logic relative to LV.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Current (RL = ∞, Pins 1 and 7 No Connection) IS 60 200 µA RL = ∞, Pins 1 and 7, No Connection 3
Minimum Supply Voltage 1.5 V RL = 10k 3
Maximum Supply Voltage 12 V RL = 10k 3
Output Resistance ROUT 100 325 Ω IL = 20mA, fOSC = 5kHz 3
Oscillator Frequency fOSC 5 kHz V+ = 5V, (Note 3) 3
Oscillator Frequency fOSC 1 kHz V+ = 2V 3
Power Efficiency PEFF 95 98 % RL = 5k, fOSC = 5kHz 3
Voltage Conversion Efficiency 97 99.9 % RL = ∞ 3
Oscillator Sink or Source Current 3 µA VOSC = 0V or V+, Pin 1 (BOOST) = 0V 3
Oscillator Sink or Source Current 20 µA VOSC = 0V or V+, Pin 1 (BOOST) = V+ 3
Supply Current (V+ = 3V) IS 15 µA RL = ∞, Pins 1 and 7, No Connection, V+ = 3V 3
Output Resistance ROUT 130 Ω V+ = 2V, IL = 3mA, fOSC = 1kHz 3
Input Voltage on Pins 1, 6 and 7 VIN -0.3 V -0.3V < VIN < V+ + 0.3V (Note 2) 2
Current into Pin 6 20 µA 2
Operating Temperature Range (LTC1044AI) -40 85 °C LTC1044AI 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 sec soldering 2
Maximum Junction Temperature TJMAX 110 °C 2
Thermal Resistance, Junction to Ambient (S8 package) θJA 130 °C/W S8 package (8-lead plastic SO) 2

CAD (KiCad official)

  • Symbol: LTC1044AIS8#TRPBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: ltc1044ais8-trpbf-etched.step / ltc1044ais8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1044ais8-trpbf.step / ltc1044ais8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 eb83e86681673665, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF