component
LTA180A1XT5
Public Made by Adomby adom
Linearin(先积集成) Current Sense Amplifiers, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LTA180A1XT5
Linearin(先积集成) · Current Sense Amplifiers · SOT-23-5L
LTA180A1XT5 from Linearin(先积集成), in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage, with a range that extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Negative power supply (ground). |
| 3 | IN+ | input | Positive current-sense input, connected to the bus-voltage side of the sense resistor for high-side sensing, with common-mode range of -0.2 V to +26 V. |
| 4 | IN- | input | Negative current-sense input, connected to the load side of the sense resistor for high-side sensing, with common-mode range of -0.2 V to +26 V. |
| 5 | VS | power_in | Positive power supply, typically 2.7 V to 5.5 V, with a 0.1 uF bypass capacitor to GND placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Linearin(先积集成) |
| Package | SOT-23-5L |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (referred-to-input) | VOS | -500 | 100 | 500 | μV | Referred-to-input | 4 |
| Offset voltage (referred-to-input, VIN+ = 0 V) | VOS | -150 | 25 | 150 | μV | Referred-to-input, VIN+ = 0 V | 4 |
| Offset voltage drift | VOS TC | 0.4 | 1 | μV/℃ | Referred-to-input, over Temperature | 4 | |
| Input bias current | IB | 0.05 | μA | VSENSE = 0 mV, VIN+ = 0 V | 4 | ||
| Input bias current | IB | 40 | μA | VSENSE = 0 mV | 4 | ||
| Input offset current | IOS | -0.05 | 0.05 | μA | VSENSE = 0 mV | 4 | |
| Common-mode input voltage range | VCM | -0.2 | 26 | V | Referred-to-input | 4 | |
| Common-mode rejection ratio | CMRR | 84 | 100 | dB | VIN+ = 0 V to +26 V, VSENSE = 10 mV, TA = -40 to +125℃ | 4 | |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V to VS-0.5 V | 4 |
| Gain error drift | EG TC | 1.5 | 15 | ppm/℃ | over Temperature | 4 | |
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5V to VS-0.5 V | 4 | ||
| Maximum capacitive load | CL | 1 | nF | No sustained oscillation | 4 | ||
| Bandwidth | BW | 160 | kHz | LTA180A1 and LTA180B1, CL = 10pF | 4 | ||
| Slew rate | SR | 1.5 | V/μs | 4 | |||
| Voltage noise density | en | 30 | nV/√Hz | Referred-to-input | 4 | ||
| Operating supply voltage | VS | 2.7 | 6 | V | 4 | ||
| Power supply rejection ratio | PSRR | -20 | 4 | 20 | μV/V | Referred-to-input, VS = +2.7V to +5.5V, VSENSE = 10 mV | 4 |
| Quiescent current | IQ | 180 | 250 | μA | VSENSE = 10 mV | 4 | |
| Quiescent current over temperature | IQ | 290 | μA | over Temperature | 4 | ||
| Gain | G | 20 | V/V | LTA180A1, LTA180B1 | 4 | ||
| Supply voltage to GND | VS | 10 | V | 2 | |||
| Analog inputs differential (VIN+, VIN-) | VIN+, VIN- | -26 | 26 | V | 2 | ||
| Analog inputs common-mode | VCM | 26 | V | IN+, IN- pins; lower limit printed as (GND, 0.3V) | 2 | ||
| Input current into all pins | 5 | mA | 2 | ||||
| Maximum output current | IOUT | 8 | mA | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 2 | ||
| Junction temperature | TJ | 150 | ℃ | 2 | |||
| Lead temperature range (soldering) | 260 | ℃ | 10 sec soldering | 2 | |||
| Electrostatic discharge, human body model | HBM | -4000 | 4000 | V | per MIL-STD-883J / Method 3015.9 | 3 | |
| Electrostatic discharge, charged device model | CDM | -2000 | 2000 | V | per ESDA/JEDEC JS-002-2014 | 3 | |
| Electrostatic discharge, machine model | MM | -400 | 400 | V | per JESD22-A115C | 3 | |
| Operating temperature | TA | -40 | 125 | ℃ | 4 | ||
| Package thermal resistance, SOT23-5L | θJA | 190 | ℃/W | SOT23-5L | 4 |
CAD (KiCad official)
- Symbol:
LTA180A1XT5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lta180a1xt5-etched.step/lta180a1xt5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lta180a1xt5.step/lta180a1xt5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Linearin(先积集成) datasheet (10 pp, sha256
16b12dcb646f2a6c, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTA180A1XT5
**Linearin(先积集成)** · Current Sense Amplifiers · SOT-23-5L
LTA180A1XT5 from Linearin(先积集成), in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output voltage, with a range that extends to within millivolts of each supply rail. |
| 2 | GND | power_in | Negative power supply (ground). |
| 3 | IN+ | input | Positive current-sense input, connected to the bus-voltage side of the sense resistor for high-side sensing, with common-mode range of -0.2 V to +26 V. |
| 4 | IN- | input | Negative current-sense input, connected to the load side of the sense resistor for high-side sensing, with common-mode range of -0.2 V to +26 V. |
| 5 | VS | power_in | Positive power supply, typically 2.7 V to 5.5 V, with a 0.1 uF bypass capacitor to GND placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Linearin(先积集成) |
| Package | SOT-23-5L |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (referred-to-input) | VOS | -500 | 100 | 500 | μV | Referred-to-input | 4 |
| Offset voltage (referred-to-input, VIN+ = 0 V) | VOS | -150 | 25 | 150 | μV | Referred-to-input, VIN+ = 0 V | 4 |
| Offset voltage drift | VOS TC | | 0.4 | 1 | μV/℃ | Referred-to-input, over Temperature | 4 |
| Input bias current | IB | | 0.05 | | μA | VSENSE = 0 mV, VIN+ = 0 V | 4 |
| Input bias current | IB | | | 40 | μA | VSENSE = 0 mV | 4 |
| Input offset current | IOS | -0.05 | | 0.05 | μA | VSENSE = 0 mV | 4 |
| Common-mode input voltage range | VCM | -0.2 | | 26 | V | Referred-to-input | 4 |
| Common-mode rejection ratio | CMRR | 84 | 100 | | dB | VIN+ = 0 V to +26 V, VSENSE = 10 mV, TA = -40 to +125℃ | 4 |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V to VS-0.5 V | 4 |
| Gain error drift | EG TC | | 1.5 | 15 | ppm/℃ | over Temperature | 4 |
| Nonlinearity error | | -0.01 | | 0.01 | % | VOUT = 0.5V to VS-0.5 V | 4 |
| Maximum capacitive load | CL | | | 1 | nF | No sustained oscillation | 4 |
| Bandwidth | BW | | 160 | | kHz | LTA180A1 and LTA180B1, CL = 10pF | 4 |
| Slew rate | SR | | 1.5 | | V/μs | | 4 |
| Voltage noise density | en | | 30 | | nV/√Hz | Referred-to-input | 4 |
| Operating supply voltage | VS | 2.7 | | 6 | V | | 4 |
| Power supply rejection ratio | PSRR | -20 | 4 | 20 | μV/V | Referred-to-input, VS = +2.7V to +5.5V, VSENSE = 10 mV | 4 |
| Quiescent current | IQ | | 180 | 250 | μA | VSENSE = 10 mV | 4 |
| Quiescent current over temperature | IQ | | | 290 | μA | over Temperature | 4 |
| Gain | G | | 20 | | V/V | LTA180A1, LTA180B1 | 4 |
| Supply voltage to GND | VS | | | 10 | V | | 2 |
| Analog inputs differential (VIN+, VIN-) | VIN+, VIN- | -26 | | 26 | V | | 2 |
| Analog inputs common-mode | VCM | | | 26 | V | IN+, IN- pins; lower limit printed as (GND, 0.3V) | 2 |
| Input current into all pins | | | | 5 | mA | | 2 |
| Maximum output current | IOUT | | | 8 | mA | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | ℃ | | 2 |
| Junction temperature | TJ | | | 150 | ℃ | | 2 |
| Lead temperature range (soldering) | | | | 260 | ℃ | 10 sec soldering | 2 |
| Electrostatic discharge, human body model | HBM | -4000 | | 4000 | V | per MIL-STD-883J / Method 3015.9 | 3 |
| Electrostatic discharge, charged device model | CDM | -2000 | | 2000 | V | per ESDA/JEDEC JS-002-2014 | 3 |
| Electrostatic discharge, machine model | MM | -400 | | 400 | V | per JESD22-A115C | 3 |
| Operating temperature | TA | -40 | | 125 | ℃ | | 4 |
| Package thermal resistance, SOT23-5L | θJA | | 190 | | ℃/W | SOT23-5L | 4 |
## CAD (KiCad official)
- Symbol: `LTA180A1XT5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `lta180a1xt5-etched.step` / `lta180a1xt5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lta180a1xt5.step` / `lta180a1xt5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Linearin(先积集成) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590918745357836288) (10 pp, sha256 `16b12dcb646f2a6c`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lta180a1xt5-datasheet.pdf)