component
LT8616EFE#TRPBF
Public Made by Adomby adom
Analog Devices DC-DC Converters, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321
{
"slug": "lt8616efe-trpbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"lt8616efe#trpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt8616efe-trpbf.kicad_sym",
"lt8616efe-trpbf.kicad_mod",
"lt8616efe-trpbf.glb",
"lt8616efe-trpbf.step",
"lt8616efe-trpbf.lbr",
"docs/hero.png",
"docs/lt8616efe-trpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt8616efe-trpbf-hero.glb",
"lt8616efe-trpbf-hero.overlay.json",
"lt8616efe-trpbf-etched.glb"
],
"component": {
"mpn": "LT8616EFE#TRPBF",
"manufacturer": "Analog Devices",
"package": "HTSSOP-28-EP",
"pin_count": 29,
"category": "Power Management ICs",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/8616fa.pdf",
"parts": {
"symbol": "lt8616efe-trpbf.kicad_sym",
"footprint": "lt8616efe-trpbf.kicad_mod",
"model_3d": "lt8616efe-trpbf-hero.glb",
"model_3d_plain": "lt8616efe-trpbf-etched.glb",
"model_3d_step": "lt8616efe-trpbf-etched.step",
"model_3d_step_plain": "lt8616efe-trpbf.step",
"lbr": "lt8616efe-trpbf.lbr"
},
"distributor_links": {
"lcsc": "C462629",
"digikey": "LT8616EFE#TRPBFTR-ND",
"mouser": "584-LT8616EFE#TRPBF"
},
"distributor_check": {
"checked_at": "2026-10-30T22:29:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LT8616EFE#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT8616EFE#TRPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "EN/UV2",
"type": "input",
"description": "Channel 2 enable/undervoltage input with 1.03V rising threshold (0.98V falling) that disables channel 2 when low; tie to VIN if unused and do not float."
},
{
"number": "2",
"name": "PG2",
"type": "output",
"description": "Open-drain power-good output for channel 2 that stays low until FB2 is within ±10% of final regulation and no fault exists (42V max)."
},
{
"number": "3",
"name": "SW2",
"type": "output",
"description": "Channel 2 switch output connecting to the inductor and boost capacitor; keep the SW node small on the PCB."
},
{
"number": "4",
"name": "SW2",
"type": "output",
"description": "Channel 2 switch output connecting to the inductor and boost capacitor; keep the SW node small on the PCB."
},
{
"number": "5",
"name": "SW2",
"type": "output",
"description": "Channel 2 switch output connecting to the inductor and boost capacitor; keep the SW node small on the PCB."
},
{
"number": "6",
"name": "BOOST2",
"type": "passive",
"description": "Channel 2 top-switch drive supply; place a 0.1µF capacitor between BOOST2 and SW2 close to the IC (4V max above SW2)."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; float to increase fault tolerance or connect to ground to facilitate PCB layout."
},
{
"number": "8",
"name": "BOOST1",
"type": "passive",
"description": "Channel 1 top-switch drive supply; place a 0.1µF capacitor between BOOST1 and SW1 close to the IC (4V max above SW1)."
},
{
"number": "9",
"name": "SW1",
"type": "output",
"description": "Channel 1 switch output connecting to the inductor and boost capacitor; keep the SW node small on the PCB."
},
{
"number": "10",
"name": "SW1",
"type": "output",
"description": "Channel 1 switch output connecting to the inductor and boost capacitor; keep the SW node small on the PCB."
},
{
"number": "11",
"name": "PG1",
"type": "output",
"description": "Open-drain power-good output for channel 1 that stays low until FB1 is within ±10% of final regulation and no fault exists (42V max)."
},
{
"number": "12",
"name": "TR/SS1",
"type": "input",
"description": "Channel 1 soft-start/tracking pin with 2µA pull-up from INTVCC; a capacitor sets the ramp, and below 0.79V FB1 regulates to this voltage (4V max)."
},
{
"number": "13",
"name": "FB1",
"type": "input",
"description": "Channel 1 feedback input regulated to 0.790V; connect the feedback resistor divider tap and a phase-lead capacitor (1.5pF to 10pF) to VOUT1."
},
{
"number": "14",
"name": "FB1",
"type": "input",
"description": "Channel 1 feedback input regulated to 0.790V; connect the feedback resistor divider tap and a phase-lead capacitor (1.5pF to 10pF) to VOUT1."
},
{
"number": "15",
"name": "RT",
"type": "passive",
"description": "A resistor from RT to ground sets the switching frequency (200kHz to 3MHz)."
},
{
"number": "16",
"name": "EN/UV1",
"type": "input",
"description": "Channel 1 enable/undervoltage input with 1.03V rising threshold (0.98V falling) that disables channel 1 when low; tie to VIN if unused and do not float."
},
{
"number": "17",
"name": "SYNC/MODE",
"type": "input",
"description": "Ground for low-ripple Burst Mode operation, tie to an external clock (250kHz to 3MHz) to synchronize, or apply 2.4V or higher/INTVCC for pulse-skipping mode; do not float (6V max)."
},
{
"number": "18",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; float to increase fault tolerance or connect to ground to facilitate PCB layout."
},
{
"number": "19",
"name": "VIN1",
"type": "power_in",
"description": "Supplies internal circuitry and the channel 1 top switch; must be locally bypassed and connected to 3.4V or above even if only channel 2 is used (42V max)."
},
{
"number": "20",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; float to increase fault tolerance or connect to ground to facilitate PCB layout."
},
{
"number": "21",
"name": "INTVCC",
"type": "power_out",
"description": "Internal regulator output powering gate drivers and control circuits; decouple with at least 1µF low-ESR ceramic to ground and do not load externally."
},
{
"number": "22",
"name": "BIAS",
"type": "power_in",
"description": "Supplies the internal regulator when above 3.1V; tie to VOUT for outputs of 3.3V and above, use a 1µF bypass if from another supply, ground if unused (30V max)."
},
{
"number": "23",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; float to increase fault tolerance or connect to ground to facilitate PCB layout."
},
{
"number": "24",
"name": "VIN2",
"type": "power_in",
"description": "Supplies the channel 2 top switch; must be locally bypassed, and VIN1 must be 3.4V or above for channel 2 to operate (42V max)."
},
{
"number": "25",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; float to increase fault tolerance or connect to ground to facilitate PCB layout."
},
{
"number": "26",
"name": "FB2",
"type": "input",
"description": "Channel 2 feedback input regulated to 0.790V; connect the feedback resistor divider tap and a phase-lead capacitor (1.5pF to 10pF) to VOUT2."
},
{
"number": "27",
"name": "FB2",
"type": "input",
"description": "Channel 2 feedback input regulated to 0.790V; connect the feedback resistor divider tap and a phase-lead capacitor (1.5pF to 10pF) to VOUT2."
},
{
"number": "28",
"name": "TR/SS2",
"type": "input",
"description": "Channel 2 soft-start/tracking pin with 2µA pull-up from INTVCC; a capacitor sets the ramp, and below 0.79V FB2 regulates to this voltage (4V max)."
},
{
"number": "29",
"name": "GND",
"type": "power_in",
"description": "Exposed pad and the only ground connection of the TSSOP package; must be soldered to the PCB ground plane and connected to the negative terminal of the input capacitors."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin-to-name mapping was read from the page 2 package drawing and cross-checked against Table 4 on pa",
"14/29 pins cited to the wrong page (name found elsewhere): ['12:TR/SS1@p9', '13:FB1@p9', '14:FB1@p9', '16:EN/UV1@p9']"
],
"pages_sent": 15,
"cost_usd": 0.0291,
"at": "2026-10-30T22:29:47"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/8616fa.pdf",
"pages": 26,
"sha256": "3030e15d0ddb3890",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt8616efe-trpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt8616efe-trpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.2,
9.7,
1.05
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e22190be13753c9c8a46936bc6b864a6bba79bce2dfb0a08e6015eb033c0e1de",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}