main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8609ahmse-pbf: viewers · Ray
lt8609ahmse-pbf-etched.glb Publish 0.1.0 · Ray
lt8609ahmse-pbf-etched.step lt8609ahmse-pbf: factory component page (tier=mfr) · Ray
lt8609ahmse-pbf-hero.glb lt8609ahmse-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8609ahmse-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt8609ahmse-pbf.glb Publish 0.1.0 · Ray
lt8609ahmse-pbf.kicad_mod Publish 0.1.0 · Ray
lt8609ahmse-pbf.kicad_sym Publish 0.1.0 · Ray
lt8609ahmse-pbf.lbr Publish 0.1.0 · Ray
lt8609ahmse-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LT8609AHMSE#PBF

Analog Devices · DC-DC Converters · MSOP-10-EP

LT8609AHMSE#PBF from Analog Devices, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST passive Provides a drive voltage higher than the input voltage to the topside power switch, requiring a 0.1µF boost capacitor placed as close as possible to the IC with no series resistor.
2 SW output Output of the internal power switches that connects to the inductor and boost capacitor and should be kept small on the PCB for good performance.
3 INTVCC power_out Internal 3.5V regulator bypass pin with a maximum output current of 20mA, varying between 2.8V and 3.5V, to be decoupled with at least 1µF low ESR ceramic and not loaded externally.
4 RT passive A resistor tied between RT and ground sets the switching frequency.
5 SYNC input External clock synchronization input: ground for low-ripple Burst Mode operation at low loads, tie to a clock to synchronize, leave floating for pulse-skipping without spread spectrum, or tie to INTVCC or a voltage between 3.2V and 5.0V for pulse-skipping with spread spectrum.
6 FB input Feedback pin that the adjustable-output parts regulate to 0.782V, with the feedback resistor divider tap connected to this pin.
7 TR/SS bidirectional Output tracking and soft-start pin with an internal 2µA pull-up from INTVCC, where a capacitor sets the output ramp rate and the pin is pulled to ground through a 300Ω MOSFET during shutdown and faults.
8 PG output Open-drain power-good output that stays low until FB (or VOUT on fixed parts) is within ±8.5% (±7.5% for fixed) of regulation with no faults, and is valid when VIN is above 3.2V.
9 VIN power_in Supplies current to the internal circuitry and the internal topside power switch and must be locally bypassed with the input capacitor positive terminal placed close to the VIN pins.
10 EN/UV input Shuts the part down when low and enables it when high, with a hysteretic threshold of 1.05V rising and 1.00V falling, and is tied to VIN if the shutdown feature is not used.
11 GND power_in Exposed pad that is the ground connection, must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-10-EP
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 2.7 3 3.2 V 4
VIN Quiescent Current (LT8609/LT8609A) 1 4 µA VEN/UV = 0V, VSYNC = 0V 4
VIN Quiescent Current (LT8609/LT8609A, not switching) 1.7 12 µA VEN/UV = 2V, Not Switching, VSYNC = 0V 4
VIN Current in Regulation (100µA load) 46 90 µA VIN = 6V, VOUT = 2.7V, Output Load = 100μA 4
VIN Current in Regulation (1mA load) 480 700 µA VIN = 6V, VOUT = 2.7V, Output Load = 1mA 4
Feedback Reference Voltage (E/I/H-Grade) 0.778 0.782 0.786 V VIN = 6V, ILOAD = 100mA 4
Feedback Reference Voltage (E/I/H-Grade, l row) 0.77 0.782 0.794 V VIN = 6V, ILOAD = 100mA 4
Feedback Voltage Line Regulation 0.004 0.02 %/V VIN = 4.0V to 40V 4
Feedback Pin Input Current -20 20 nA VFB = 1.0V 4
Minimum On-Time (SYNC = 0V) 45 75 ns ILOAD = 1.5A, SYNC = 0V 4
Minimum On-Time (SYNC = 1.9V) 45 60 ns ILOAD = 1.5A, SYNC = 1.9V 4
Minimum Off Time 90 130 ns 4
Oscillator Frequency (RT = 221k) 155 200 245 kHz RT = 221k, ILOAD = 0.5A 5
Oscillator Frequency (RT = 60.4k) 640 700 760 kHz RT = 60.4k, ILOAD = 0.5A 5
Oscillator Frequency (RT = 18.2k) 1.925 2 2.075 MHz RT = 18.2k, ILOAD = 0.5A 5
Top Power NMOS On-Resistance 185 mΩ ILOAD = 1A 5
Top Power NMOS Current Limit 3.4 4.5 5.7 A 5
Bottom Power NMOS On-Resistance 115 mΩ 5
SW Leakage Current 15 µA VIN = 42V, VSW = 40V 5
EN/UV Pin Threshold (rising) 0.99 1.05 1.11 V EN/UV Rising 5
EN/UV Pin Hysteresis 50 mV 5
EN/UV Pin Current -20 20 nA VEN/UV = 2V 5
PG Upper Threshold Offset from VFB 5 8.5 13 % VFB Rising 5
PG Lower Threshold Offset from VFB 5 8.5 13 % VFB Falling 5
PG Hysteresis 0.5 % 5
PG Leakage -200 200 nA VPG = 42V 5
PG Pull-Down Resistance 550 1200 Ω VPG = 0.1V 5
Sync Low Input Voltage 0.4 0.9 V LT8609/LT8609A 5
Sync High Input Voltage 2.7 3.2 V INTVCC = 3.5V 5
TR/SS Source Current 1 2 3 µA 5
TR/SS Pull-Down Resistance 300 900 Ω Fault Condition, TR/SS = 0.1V 5
Spread Spectrum Modulation Frequency 1 3 6 kHz VSYNC = 3.3V 5
Absolute Maximum FB, TR/SS 4 V 2
Absolute Maximum SYNC 6 V 2
Operating Junction Temperature Range (LT8609AH) -40 150 °C LT8609H/LT8609AH 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance Junction-to-Ambient (MSE package) θJA 40 °C/W 10-Lead Plastic MSOP (MSE package) 2

CAD (KiCad official)

  • Symbol: LT8609AHMSE#PBF
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: lt8609ahmse-pbf-etched.step / lt8609ahmse-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8609ahmse-pbf.step / lt8609ahmse-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (30 pp, sha256 bb514bf594e97238, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF