main
Ray Publish 0.1.0 c897d0e
{
  "slug": "lt8609aeddm-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt8609aeddm#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt8609aeddm-pbf.kicad_sym",
    "lt8609aeddm-pbf.kicad_mod",
    "lt8609aeddm-pbf.glb",
    "lt8609aeddm-pbf.step",
    "lt8609aeddm-pbf.lbr",
    "docs/hero.png",
    "docs/lt8609aeddm-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt8609aeddm-pbf-hero.glb",
    "lt8609aeddm-pbf-hero.overlay.json",
    "lt8609aeddm-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT8609AEDDM#PBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LT8609-8609A-8609B.pdf",
    "parts": {
      "symbol": "lt8609aeddm-pbf.kicad_sym",
      "footprint": "lt8609aeddm-pbf.kicad_mod",
      "model_3d": "lt8609aeddm-pbf-hero.glb",
      "model_3d_plain": "lt8609aeddm-pbf-etched.glb",
      "model_3d_step": "lt8609aeddm-pbf-etched.step",
      "model_3d_step_plain": "lt8609aeddm-pbf.step",
      "lbr": "lt8609aeddm-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C673976",
      "digikey": "505-LT8609AEDDM#PBF-ND",
      "mouser": "584-LT8609AEDDM#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T20:10:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT8609AEDDM#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT8609AEDDM#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BST",
        "type": "power_out",
        "description": "Provides a drive voltage higher than VIN to the topside power switch; place a 0.1µF boost capacitor as close as possible to the IC and do not place a resistor in series with this pin."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Output of the internal power switches; connect to the inductor and boost capacitor and keep this node small on the PCB for good performance."
      },
      {
        "number": "3",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Internal 3.5V regulator bypass pin that powers the internal drivers and control circuits; maximum output current is 20mA, voltage varies between 2.8V and 3.5V, decouple with at least 1µF low-ESR ceramic, and do not load with external circuitry."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "passive",
        "description": "A resistor tied between RT and ground sets the switching frequency (200kHz to 2.2MHz operating range)."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "input",
        "description": "External clock synchronization input: ground for low-ripple Burst Mode operation at low loads, tie to a clock to synchronize, leave floating for pulse-skipping mode, or tie to INTVCC or 3.2V to 5.0V for pulse-skipping with spread spectrum modulation."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin for the adjustable output part, regulated to 0.782V; connect the feedback resistor divider tap to this pin."
      },
      {
        "number": "7",
        "name": "TR/SS",
        "type": "passive",
        "description": "Output tracking and soft-start pin; a voltage below 0.782V forces FB to follow it, an internal 2µA pull-up from INTVCC sets the output slew rate via a capacitor, and it is pulled to ground through 300Ω during shutdown and fault conditions."
      },
      {
        "number": "8",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that stays low until FB is within ±8.5% of the regulation voltage with no fault conditions, and is valid when VIN is above 3.2V."
      },
      {
        "number": "9",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies current to the internal circuitry and the internal topside power switch from a 3.0V to 42V input and must be locally bypassed with the input capacitor placed close to the VIN and GND pins."
      },
      {
        "number": "10",
        "name": "EN/UV",
        "type": "input",
        "description": "Enable and undervoltage input: the part is shut down when low and active when high, with a hysteretic threshold of 1.05V rising and 1.00V falling; tie to VIN if shutdown is not used."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad that must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower thermal resistance (θJA = 45°C/W, θJC = 10°C/W)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DFN pin-configuration text on page 2 is scrambled in extraction (pin numbers and names are not a; LT8609AEDDM#PBF is the adjustable-output variant, so pin 6 is FB. The VOUT pin shown on the DFN draw; Pin types are mapped to KiCad ERC classes by inference from the function descriptions (the datasheet"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0822,
        "at": "2026-10-28T20:10:12"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LT8609-8609A-8609B.pdf",
        "pages": 30,
        "sha256": "bb514bf594e97238",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt8609aeddm-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt8609aeddm-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bb63bf69d76ec424db9dd61819308b11a2c56f55e7672410f74f78dfa47847c1",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DDM",
      "source_page": 27,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt8609aeddm-pbf.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}