Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8607EDC#TRPBF

Analog Devices · DC-DC Converters · DFN-8-EP(2x2)

LT8607EDC#TRPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST power_out Provides a drive voltage higher than VIN to the topside power switch, so a 0.1µF boost capacitor must be placed as close to the IC as possible and no resistor may be placed in series with this pin.
2 SW output Output of the internal power switches that connects to the inductor and boost capacitor, and this node should be kept small on the PCB for good performance.
3 INTVCC power_out Internal 3.5V regulator bypass pin that varies between 2.8V and 3.5V, has a maximum output current of 20mA, must be decoupled to power ground with at least a 1µF low ESR ceramic capacitor, and must not be loaded with external circuitry.
4 RT passive A resistor connected from RT to ground sets the switching frequency, and when synchronizing the resistor must be chosen so the switching frequency is at or below the lowest synchronization input.
5 FB input The LT8607 regulates this pin to 0.778V, and the feedback resistor divider tap connects to this pin.
6 PG output Open-drain power-good output that stays low until FB is within ±8.5% of the final regulation voltage with no fault conditions, is valid only when VIN is above 3.2V and EN/UV is high, and is high impedance when VIN is near zero.
7 VIN power_in Supplies current to the internal circuitry and the internal topside power switch and must be locally bypassed, with the input capacitor positive terminal placed as close as possible to the VIN pin.
8 EN/UV input Shuts the LT8607 down when low and enables it when high, with an accurate hysteretic threshold of 1.05V rising and 1.00V falling that can also program a VIN undervoltage lockout through an external divider.
9 GND power_in Exposed pad that must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower the thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 2.5 3 3.2 V Over full operating temperature range (l) 3
VIN Current in Regulation (LT8607/LT8607B) 56 90 µA VIN = 6V, VOUT = 2.7V, Output Load = 100µA; over full operating temperature range (l) 3
VIN Current in Regulation (LT8607/LT8607B) 500 700 µA VIN = 6V, VOUT = 2.7V, Output Load = 1mA; over full operating temperature range (l) 3
Feedback Reference Voltage (LT8607/LT8607B DFN Package) 0.771 0.778 0.785 V VIN = 6V, ILOAD = 100mA 3
Feedback Reference Voltage (LT8607/LT8607B DFN Package) 0.753 0.778 0.803 V VIN = 6V, ILOAD = 100mA; over full operating temperature range (l) 3
Feedback Voltage Line Regulation (LT8607/LT8607B) 0.02 0.04 %/V VIN = 4.0V to 40V; over full operating temperature range (l) 3
Feedback Pin Input Current (LT8607/LT8607B) -20 20 nA VFB = 1.0V; over full operating temperature range (l) 4
Minimum On-Time (LT8607 DFN) 35 65 ns ILOAD = 500mA, SYNC = 0V or LT8607 DFN; over full operating temperature range (l) 4
Minimum Off Time 93 130 ns ILOAD = 300mA 4
Oscillator Frequency (DFN Package) 140 200 260 kHz RT = 221k, ILOAD = 350mA; over full operating temperature range (l) 4
Oscillator Frequency (DFN Package) 610 700 790 kHz RT = 60.4k, ILOAD = 350mA; over full operating temperature range (l) 4
Oscillator Frequency (DFN Package) 1.85 2 2.15 MHz RT = 18.2k, ILOAD = 350mA; over full operating temperature range (l) 4
Top Power NMOS Current Limit (DFN Package) 1.2 1.7 2.2 A Over full operating temperature range (l) 4
EN/UV Pin Threshold (EN/UV Rising) 0.99 1.05 1.11 V EN/UV Rising; over full operating temperature range (l) 4
EN/UV Pin Current -20 20 nA VEN/UV = 2V 4
PG Upper Threshold (Offset from VFB) 5 8.5 13 % VFB Rising; over full operating temperature range (l) 4
PG Lower Threshold (Offset from VFB) 5 8.5 13 % VFB Falling; over full operating temperature range (l) 4
PG Leakage -200 200 nA VPG = 42V 4
PG Pull-Down Resistance 550 1200 Ω VPG = 0.1V 4
FB Voltage (Absolute Maximum) 4 V Absolute maximum rating; printed row is shared with TR/SS, which is not present on the DFN package 2
Storage Temperature Range -65 150 °C 2
Operating Junction Temperature Range (LT8607E) -40 125 °C LT8607E 2
Top Power NMOS On-Resistance 375 mΩ ILOAD = 500mA 4
Bottom Power NMOS On-Resistance 240 mΩ 4
SW Leakage Current 5 µA VIN = 36V 4
EN/UV Pin Hysteresis 50 mV 4
PG Hysteresis 0.5 % 4
Thermal Resistance Junction-to-Ambient (DC8 DFN package) θJA 102 °C/W 8-Lead DFN package, exposed pad soldered to PCB 2

CAD (KiCad official)

  • Symbol: LT8607EDC#TRPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt8607edc-trpbf-etched.step / lt8607edc-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8607edc-trpbf.step / lt8607edc-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 3023cd9406e13917, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF