Generated by kicad-footprint-generator · KiCad file format 20260206
LT8390AHFE#PBF
Analog Devices · DC-DC Controllers · TSSOP-28-EP
LT8390AHFE#PBF from Analog Devices, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BG1 | output | Buck side bottom gate drive for the buck side bottom N-channel MOSFET, swinging from ground to INTVCC. |
| 2 | BST1 | passive | Buck side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, needing an external capacitor to SW1 and swinging from a diode drop below INTVCC to (VIN + INTVCC). |
| 3 | SW1 | passive | Buck side switch node that swings from a Schottky diode voltage drop below ground up to VIN. |
| 4 | TG1 | output | Buck side top gate drive for the buck side top N-channel MOSFET, swinging from SW1 to BST1. |
| 5 | LSP | input | Positive terminal of the buck side inductor current sense resistor (RSENSE), requiring a Kelvin connection for accurate sensing. |
| 6 | LSN | input | Negative terminal of the buck side inductor current sense resistor (RSENSE), requiring a Kelvin connection for accurate sensing. |
| 7 | VIN | power_in | Input supply (4V to 60V operating) that must be tied to the power input to determine the buck, buck-boost or boost operation region, and bypassed locally with at least 1µF to ground. |
| 8 | INTVCC | power_out | Internal 5V linear regulator output supplied from VIN that powers the internal control circuitry and gate drivers, to be bypassed with at least 4.7µF to ground. |
| 9 | EN/UVLO | input | Enable and undervoltage lockout input that shuts the part down below 0.3V, enables above 1.233V, has an accurate 1.220V falling threshold and a 2.5µA pull-down current for hysteresis, and is tied to VIN if unused. |
| 10 | TEST | input | Factory test pin that must be connected directly to ground for the part to operate properly. |
| 11 | LOADEN | input | Load switch enable input controlling the high side PMOS load switch, tied to VREF or INTVCC if unused, and when forced low it turns off TG1, TG2 and LOADTG and turns on BG1 and BG2. |
| 12 | VREF | power_out | Accurate 2V voltage reference output capable of supplying 1mA, to be bypassed locally with a 0.47µF ceramic capacitor to ground. |
| 13 | CTRL | input | Control input that programs the ISP/ISN current sense threshold, reaching the 100mV full-scale threshold for VCTRL of 1.35V or more (tie to VREF) and stopping switching when forced below 0.3V. |
| 14 | ISP | input | Positive terminal of the ISP/ISN current sense resistor (RIS), requiring a Kelvin connection for accurate sensing. |
| 15 | ISN | input | Negative terminal of the ISP/ISN current sense resistor (RIS), requiring a Kelvin connection for accurate sensing. |
| 16 | ISMON | output | ISP/ISN current sense monitor output voltage equal to ten times V(ISP-ISN) plus a 0.25V offset, tied to the slave CTRL pin in parallel applications. |
| 17 | PGOOD | output | Power good open-drain output that is pulled low when FB is within ±10% of the final regulation voltage and requires an external pull-up resistor. |
| 18 | SS | passive | Soft-start timer setting using a capacitor to ground (22nF recommended) charged by an internal 12.5µA pull-up, where a single resistor to VREF selects hiccup (no resistor), latch-off (499kΩ) or keep-running (100kΩ) fault mode. |
| 19 | FB | input | Voltage loop feedback input regulated to 1.00V by the error amplifier, with short-circuit detection below 0.25V and an overvoltage condition above 1.1V that turns off all gate drives and LOADTG. |
| 20 | VC | output | Error amplifier output that sets the inductor current comparator threshold and is compensated with an external RC network, disconnected from internal loads when LOADEN is low. |
| 21 | RT | passive | Switching frequency setting pin where a resistor to ground sets the internal oscillator frequency from 600kHz to 2MHz. |
| 22 | SYNC/SPRD | input | Switching frequency synchronization or spread spectrum input: ground it for the internal oscillator frequency, apply a clock for external synchronization, or tie to INTVCC for 25% triangle spread spectrum. |
| 23 | LOADTG | output | High side PMOS load switch top gate drive, a buffered and inverted version of LOADEN swinging from the higher of (VOUT-5V) and 1.2V up to VOUT, left unconnected if unused. |
| 24 | VOUT | input | Output supply pin that must be tied to the power output to determine the buck, buck-boost or boost operation region, also the positive rail for the LOADTG drive, bypassed locally with at least 1µF to ground. |
| 25 | TG2 | output | Boost side top gate drive for the boost side top N-channel MOSFET, swinging from SW2 to BST2. |
| 26 | SW2 | passive | Boost side switch node that swings from a Schottky diode voltage drop below ground up to VOUT. |
| 27 | BST2 | passive | Boost side bootstrap floating driver supply with an integrated Schottky diode from INTVCC, needing an external capacitor to SW2 and swinging from a diode drop below INTVCC to (VOUT + INTVCC). |
| 28 | BG2 | output | Boost side bottom gate drive for the boost side bottom N-channel MOSFET, swinging from ground to INTVCC. |
| 29 | GND | power_in | Exposed pad ground that must be soldered directly to the PCB ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-28-EP |
| Category | Power Supply Chip |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum VIN, EN/UVLO, VOUT, ISP, ISN | 60 | V | 2 | ||||
| Absolute maximum (ISP-ISN) | -1 | 1 | V | 2 | |||
| Absolute maximum SW1, SW2, LSP, LSN | -6 | 60 | V | 2 | |||
| Absolute maximum INTVCC, (BST1-SW1), (BST2-SW2) | 6 | V | 2 | ||||
| Absolute maximum (BST1-LSP), (BST1-LSN) | 6 | V | 2 | ||||
| Absolute maximum FB, LOADEN, SYNC/SPRD, CTRL, PGOOD | 6 | V | 2 | ||||
| Storage temperature range | -65 | 150 | C | 2 | |||
| Operating junction temperature range LT8390AH | -40 | 150 | C | LT8390AH | 2 | ||
| VIN Operating Voltage Range | 4 | 60 | V | 4 | |||
| VOUT Voltage Range | 0 | 60 | V | 4 | |||
| VIN Quiescent Current | 1 | 2 | uA | VEN/UVLO = 0.3V | 4 | ||
| VIN Quiescent Current Not Switching | 2.1 | 2.8 | mA | Not Switching | 4 | ||
| VOUT Quiescent Current | 0.1 | 0.5 | uA | VEN/UVLO = 0.3V, VOUT = 12V | 4 | ||
| VOUT Quiescent Current Not Switching | 20 | 40 | 60 | uA | Not Switching, VOUT = 12V | 4 | |
| INTVCC Regulation Voltage | 4.85 | 5 | 5.15 | V | IINTVCC = 20mA | 4 | |
| INTVCC Load Regulation | 1 | 4 | % | IINTVCC = 0mA to 80mA | 4 | ||
| INTVCC Current Limit | 110 | 145 | 190 | mA | VINTVCC = 4.5V | 4 | |
| INTVCC Undervoltage Lockout Threshold Falling | 3.44 | 3.54 | 3.64 | V | Falling | 4 | |
| VREF Regulation Voltage | 1.97 | 2 | 2.03 | V | IVREF = 100uA | 4 | |
| VREF Load Regulation | 0.4 | 1 | % | IVREF = 0mA to 1mA | 4 | ||
| VREF Line Regulation | 0.1 | 0.2 | % | IVREF = 100uA, VIN = 4V to 60V | 4 | ||
| VREF Current Limit | 2 | 2.5 | 3.2 | mA | VREF = 1.8V | 4 | |
| EN/UVLO Shutdown Threshold | 0.3 | 0.6 | 1 | V | 4 | ||
| EN/UVLO Enable Threshold Falling | 1.196 | 1.22 | 1.244 | V | Falling | 4 | |
| EN/UVLO Hysteresis Current | -0.1 | 0 | 0.1 | uA | VEN/UVLO = 0.3V | 4 | |
| CTRL Input Bias Current | 0 | 20 | 50 | nA | VCTRL = 0.75V, Current Out of Pin | 4 | |
| CTRL Latch-Off Threshold | 285 | 300 | 315 | mV | Falling | 4 | |
| LOADEN Threshold | 1.3 | 1.4 | 1.5 | V | Rising | 4 | |
| LOADTG On Voltage | V(VOUT-LOADTG) | 4.5 | 5 | 5.5 | V | VOUT = 12V | 4 |
| LOADTG Off Voltage | V(VOUT-LOADTG) | -0.1 | 0 | 0.1 | V | VOUT = 12V | 4 |
| Full Scale Current Regulation | V(ISP-ISN) | 97 | 100 | 103 | mV | VCTRL = 2V, VISP = 12V | 5 |
| 1/10th Current Regulation | V(ISP-ISN) | 8 | 10 | 12 | mV | VCTRL = 0.35V, VISP = 12V | 5 |
| ISMON Monitor Output | VISMON | 1.2 | 1.25 | 1.3 | V | V(ISP-ISN) = 100mV, VISP = 12V/0V | 5 |
| ISP/ISN Input Common Mode Range | 0 | 60 | V | 5 | |||
| FB Regulation Voltage | VFB | 0.985 | 1 | 1.015 | V | VC = 1.2V | 5 |
| FB Load Regulation | 0.2 | 0.8 | % | 5 | |||
| FB Input Bias Current | 10 | 40 | nA | FB in Regulation, Current Out of Pin | 5 | ||
| VC Standby Leakage Current | -10 | 0 | 10 | nA | VC = 1.2V, VLOADEN = 0V | 5 | |
| Maximum Current Sense Threshold Buck | V(LSP-LSN) | 35 | 50 | 65 | mV | Buck, VFB = 0.8V | 5 |
| Maximum Current Sense Threshold Boost | V(LSP-LSN) | 40 | 50 | 60 | mV | Boost, VFB = 0.8V | 5 |
| FB Overvoltage Threshold Rising | VFB | 1.08 | 1.1 | 1.12 | V | Rising | 5 |
| FB Overvoltage Hysteresis | 35 | 50 | 65 | mV | 5 | ||
| FB Short Threshold Falling | VFB | 0.24 | 0.25 | 0.26 | V | Falling | 5 |
| PGOOD Upper Threshold | 8 | 10 | 12 | % | Offset from VFB Rising | 5 | |
| PGOOD Lower Threshold | -12 | -10 | -8 | % | Offset from VFB Falling | 5 | |
| SS Pull-Up Current | 10 | 12.5 | 15 | uA | VFB = 0.4V, VSS = 0V | 5 | |
| SS Pull-Down Current | 1 | 1.25 | 1.5 | uA | VFB = 0.1V, VSS = 2V | 5 | |
| Switching Frequency | 645 | 685 | 725 | kHz | VSYNC/SPRD = 0V, RT = 226kOhm | 6 | |
| Switching Frequency | 1290 | 1360 | 1430 | kHz | VSYNC/SPRD = 0V, RT = 100kOhm | 6 | |
| Switching Frequency | 1900 | 2000 | 2100 | kHz | VSYNC/SPRD = 0V, RT = 59.0kOhm | 6 | |
| SYNC Frequency | 600 | 2100 | kHz | 6 | |||
| Highest Spread Spectrum Above Oscillator Frequency | 21 | 23 | 25 | % | VSYNC/SPRD = 5V | 6 | |
| Buck-Boost to Boost region transition | 0.73 | 0.75 | 0.77 | VIN/VOUT | 6 | ||
| Peak-Buck to Peak-Boost region transition | 0.96 | 0.98 | 1 | VIN/VOUT | 6 | ||
| Thermal resistance junction-to-ambient (TSSOP FE package) | θJA | 30 | C/W | FE package | 2 | ||
| Thermal resistance junction-to-case (TSSOP FE package) | θJC | 5 | C/W | FE package | 2 |
CAD (KiCad official)
- Symbol:
LT8390AHFE#PBF - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
lt8390ahfe-pbf-etched.step/lt8390ahfe-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8390ahfe-pbf.step/lt8390ahfe-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (32 pp, sha256
b3c86e61a1228fd3, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).