Generated by kicad-footprint-generator · KiCad file format 20260206
LT8357JMSE#PBF
Analog Devices · DC-DC Converters · MSOP-12-EP
LT8357JMSE#PBF from Analog Devices, in a MSOP-12-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VC | passive | Error amplifier compensation node where an external RC network is placed to compensate the control loop. |
| 2 | FB | input | Output voltage feedback input tied to a resistor divider from the output to ground, regulated to 1V during normal operation. |
| 3 | PGOOD | output | Open-drain power good output that is pulled low when FB is beyond ±8% of the final regulation voltage and requires an external pull-up resistor. |
| 4 | SS | passive | Soft-start timer pin with a capacitor to ground; an internal 15µA pull-up ramps FB regulation, and UVLO or thermal shutdown pulls SS to ground and stops switching. |
| 5 | RT | passive | Switching frequency setting pin where a resistor to ground sets the internal oscillator frequency from 100kHz to 2MHz. |
| 6 | SYNC/MODE | input | External frequency synchronization and operation mode selection pin that selects one of five modes via its connection to external clock, INTVCC, float, 100kΩ to GND, or GND. |
| 7 | SENSE | input | Current sense comparator input that is Kelvin connected to the positive terminal of the current sense resistor in the source of the bottom MOSFET. |
| 8 | GATEN | output | MOSFET gate pull-down drive that swings the N-channel MOSFET gate from ground to INTVCC. |
| 9 | GATEP | output | MOSFET gate pull-up drive that swings the N-channel MOSFET gate from ground to INTVCC. |
| 10 | INTVCC | power_out | Internal 5V linear regulator output that powers control circuitry and the gate driver, must not be loaded externally, and needs a minimum 2.2µF ceramic bypass to ground. |
| 11 | EN/UVLO | input | Enable and undervoltage lockout pin that shuts the part down when forced below 0.3V, reducing VIN quiescent current below 3µA, and must be tied to VIN if neither function is used. |
| 12 | VIN | power_in | Input supply pin normally tied to the power input or boost converter output that also supplies the INTVCC regulator and requires a local 0.1µF ceramic bypass to ground. |
| 13 | GND | power_in | Exposed pad ground that must be soldered directly to the ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-12-EP |
| Category | Power Management |
| Pins | 13 |
CAD (KiCad official)
- Symbol:
LT8357JMSE#PBF - Footprint:
Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm - 3D model: MSOP-12-EP (KiCad packages3D, STEP)
- 3D model files:
lt8357jmse-pbf-etched.step/lt8357jmse-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8357jmse-pbf.step/lt8357jmse-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (35 pp, sha256
2fcc6f0e3b64128f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).