Generated by kicad-footprint-generator · KiCad file format 20260206
LT8336EV#WPBF
Analog Devices · DC-DC Converters · LQFN-16-EP(3x3)
LT8336EV#WPBF from Analog Devices, in a LQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SYNC/MODE | input | Selects the operating mode (Burst, Burst/SSFM, Pulse-Skipping, Pulse-Skipping/SSFM, or external clock sync) and accepts an external clock between 300kHz and 3MHz. |
| 2 | RT | input | Switching frequency adjustment pin; a resistor from RT to GND at pin 3 programs fSW, and RT must not be left open. |
| 3 | GND | power_in | Ground pin for the switching frequency resistor and the FB divider reference. |
| 4 | FB | input | Feedback input from the external VOUT resistor divider to the error amplifier, regulated to 1.000V nominal with a 2.7V to 40V VIN range. |
| 5 | GND | power_in | Ground connection for the 1µF output capacitor between VOUT pin 6 and GND, which must be placed as close to the IC as possible. |
| 6 | VOUT | power_out | Output pin; a 1µF capacitor connects from this pin to GND pin 5 only, and bulk capacitors of 2.2µF or more are placed close to the IC. |
| 7 | VOUT | power_out | Output pin; a matching 1µF capacitor connects from this pin to GND pin 8 only, placed as close to the IC as possible. |
| 8 | GND | power_in | Ground connection for the 1µF output capacitor between VOUT pin 7 and GND. |
| 9 | SW | output | Switch node output of the internal power switches, tied together with pins 10 and 11 to the inductor and boost capacitor CBST. |
| 10 | SW | output | Switch node output of the internal power switches, tied together with pins 9 and 11 to the inductor and CBST. |
| 11 | SW | output | Switch node output of the internal power switches, tied together with pins 9 and 10 to the inductor and CBST. |
| 12 | BST | passive | Top switch gate driver supply; a 0.1µF CBST is placed between BST and SW close to the IC. |
| 13 | VIN | power_in | Input supply pin that must connect to the input terminal of the inductor in the power stage, rated 2.7V to 40V. |
| 14 | EN/UVLO | input | Enable and input undervoltage lockout; the IC shuts down below 1V typical and is enabled above 1.0V typical, and it must be tied to VIN if shutdown is unused. |
| 15 | INTVCC | power_out | Internal 3.5V regulator bypass pin that must be decoupled with a 1µF or larger low ESR ceramic capacitor and must not be externally loaded. |
| 16 | PG | output | Open-drain power good output pulled to ground when VOUT is more than ±8% outside regulation, or when EN/UVLO is below 1V, INTVCC is too low, or thermal shutdown occurs. |
| 17 | GND | power_in | Exposed pad that is GND and must be soldered to the PCB ground plane for thermal and electrical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFN-16-EP(3x3) |
| Category | Power Management ICs |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operation Voltage | VIN | 2.7 | 40 | V | 2 | ||
| VIN Quiescent Current | IQ | 0.3 | 1 | µA | EN/UVLO = 0.15V | 2 | |
| VIN Quiescent Current (full operating temperature range) | IQ | 0.3 | 10 | µA | EN/UVLO = 0.15V, l (full operating temperature range) | 2 | |
| VIN Quiescent Current, not switching | IQ | 4 | 8 | µA | SYNC/MODE = 0V, Not Switching | 2 | |
| VIN Quiescent Current, not switching, SYNC/MODE open | IQ | 0.9 | 1.5 | mA | SYNC/MODE = Open, Not Switching | 2 | |
| VIN Quiescent Current in PassThru Mode | IQ | 15 | 25 | µA | VIN = 10.1V, VOUT = 10V, FB = 1.05V (In PassThru Mode) | 2 | |
| FB Regulation Voltage E-Grade/H-Grade | VFB | 0.994 | 1 | 1.006 | V | E-Grade/H-Grade, l | 3 |
| FB Line Regulation | 0.005 | 0.02 | %/V | 2.7V < VIN < 40V, l | 3 | ||
| FB Pin Input Current | IFB | -20 | 20 | nA | FB = 1.0V | 3 | |
| Switching Frequency | fSW | 1.85 | 2.15 | MHz | RT = 47.5kΩ, l | 3 | |
| Synchronizable Frequency | fSYNC | 0.3 | 3 | MHz | SYNC/MODE = External Clock, l | 3 | |
| SYNC/MODE Pin Input Logic Level SYNC Logic Low | 0.4 | V | SYNC Logic Low, l | 3 | |||
| SYNC/MODE Pin Input Logic Level SYNC Logic High | 1.7 | V | SYNC Logic High, l | 3 | |||
| EN/UVLO Threshold Voltage Falling | VEN/UVLO | 0.94 | 1 | 1.06 | V | Falling, l | 3 |
| EN/UVLO Input Bias Current | IEN/UVLO | -40 | 40 | nA | EN/UVLO = 2V | 3 | |
| PG Upper Threshold Offset from Regulated FB | 5 | 8 | 12 | % | FB Falling | 3 | |
| PG Lower Threshold Offset from Regulated FB | -12 | -8 | -5 | % | FB Rising | 3 | |
| PG Leakage Current | -40 | 40 | nA | PG = 3.5V | 3 | ||
| PG Pull-Down Resistance | 700 | 2000 | Ω | PG = 0.1V, l | 3 | ||
| Bottom Switch Current Limit | 2.5 | 3 | 3.3 | A | l | 3 | |
| Bottom Switch Minimum Off-time | 20 | 50 | ns | 3 | |||
| Bottom Switch Minimum On-time | 20 | 80 | ns | VIN = 9.5V, VOUT = 10V | 3 | ||
| SW Leakage Current | -1.5 | 1.5 | µA | VOUT = 40V, SW = 0V, 40V | 3 | ||
| VIN, VOUT, EN/UVLO Pin Voltage | 40 | V | Absolute maximum rating | 2 | |||
| SYNC/MODE, FB Pin Voltage | 6 | V | Absolute maximum rating | 2 | |||
| PG Pin Voltage | 10 | V | Absolute maximum rating | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | LT8336E | 2 | |
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 42.8 | °C/W | 2 | |||
| Thermal Resistance Junction to Case (top) | θJCtop | 45.2 | °C/W | 2 | |||
| Thermal Resistance Junction to Case (bottom) | θJCbottom | 8.2 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT8336EV#WPBF - Footprint:
Package_DFN_QFN:LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: LQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lt8336ev-wpbf-etched.step/lt8336ev-wpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8336ev-wpbf.step/lt8336ev-wpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
65b0ead76f1e1165, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).