main
Ray
Publish 0.1.0
c106a13
LT8302ES8E#TRPBF
Analog Devices · DC-DC Converters · SOIC-8-EP
LT8302ES8E#TRPBF from Analog Devices, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Enable/undervoltage lockout pin with accurate 1.214V threshold; pull below 0.3V to shut down, program VIN UVLO with a resistor divider (2.5µA hysteresis current), or tie to VIN if unused. |
| 2 | INTVCC | power_out | Internal 3V linear regulator output powering internal control circuitry and gate driver; do not overdrive externally and bypass locally with at least 1µF ceramic capacitor. |
| 3 | VIN | power_in | Input supply (3V to 42V) for internal circuitry and reference for the RFB feedback circuit; bypass locally to ground with a capacitor. |
| 4 | GND | power_in | Ground pin, connected together with exposed pad pin 9. |
| 5 | SW | passive | Drain of the internal DMOS power switch rated 65V; minimize trace area to reduce EMI and voltage spikes. |
| 6 | RFB | input | Input for external feedback resistor connected to the transformer primary SW pin; the RFB/RREF ratio times the internal reference sets the output voltage, and trace area should be minimized. |
| 7 | RREF | input | Input for external ground-referred reference resistor, nominally 10k with a range of 9.09k to 11.0k. |
| 8 | TC | output | Output voltage temperature compensation pin with PTAT voltage of 1V at 25°C (3.35mV/°K); connect a resistor to RREF to compensate the output diode temperature coefficient. |
| 9 | GND | power_in | Exposed pad is ground and must be soldered to the PCB ground plane for electrical and thermal contact. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Voltage Range | VIN | 3 | 42 | V | full operating temperature range | 3 | |
| VIN Quiescent Current, shutdown | IQ | 0.5 | 2 | µA | VEN/UVLO = 0.2V | 3 | |
| VIN Quiescent Current, Sleep Mode (Switch Off) | IQ | 106 | µA | VEN/UVLO = 1.1V, Sleep Mode (Switch Off) | 3 | ||
| VIN Quiescent Current, Active Mode (Switch On) | IQ | 380 | µA | VEN/UVLO = 1.1V, Active Mode (Switch On) | 3 | ||
| EN/UVLO Shutdown Threshold For Lowest Off IQ | 0.2 | 0.75 | V | full operating temperature range | 3 | ||
| EN/UVLO Enable Threshold Falling (E, I, H, MP Grades) | 1.178 | 1.214 | 1.25 | V | full operating temperature range | 3 | |
| EN/UVLO Enable Hysteresis | 14 | mV | 3 | ||||
| EN/UVLO Hysteresis Current | IHYS | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 0.3V | 3 |
| EN/UVLO Hysteresis Current | IHYS | 2.3 | 2.5 | 2.7 | µA | VEN/UVLO = 1.1V | 3 |
| INTVCC Regulation Voltage | VINTVCC | 2.85 | 3 | 3.1 | V | IINTVCC = 0mA to 10mA | 3 |
| INTVCC Current Limit | IINTVCC | 10 | 13 | 20 | mA | VINTVCC = 2.8V | 3 |
| INTVCC UVLO Threshold Falling | 2.39 | 2.47 | 2.55 | V | 3 | ||
| INTVCC UVLO Hysteresis | 105 | mV | 3 | ||||
| (RFB, VIN) Voltage | -50 | 50 | mV | IRFB = 75µA to 125µA | 3 | ||
| RREF Regulation Voltage | 0.98 | 1 | 1.02 | V | full operating temperature range | 3 | |
| RREF Regulation Voltage Line Regulation | -0.01 | 0 | 0.01 | %/V | 3V ≤ VIN ≤ 42V | 3 | |
| TC Pin Voltage | VTC | 1 | V | 3 | |||
| TC Pin Current | ITC | 12 | 15 | 18 | µA | VTC = 1.2V (LT8302) | 3 |
| TC Pin Current | ITC | -200 | µA | VTC = 0.8V | 3 | ||
| Minimum Switching Frequency | fMIN | 11.3 | 12 | 12.7 | kHz | 3 | |
| Minimum Switch-On Time | tON(MIN) | 160 | ns | 3 | |||
| Maximum Switch-Off Time | tOFF(MAX) | 170 | µs | Backup Timer | 3 | ||
| Maximum Switch Current Limit | ISW(MAX) | 3.6 | 4.5 | 5.4 | A | 3 | |
| Minimum Switch Current Limit | ISW(MIN) | 0.7 | 0.87 | 1.04 | A | 3 | |
| Switch On-Resistance | RDS(ON) | 80 | mΩ | ISW = 1.5A | 3 | ||
| Switch Leakage Current | ILKG | 0.1 | 0.5 | µA | VSW = 65V | 3 | |
| Soft-Start Timer | tSS | 11 | ms | 3 | |||
| SW Voltage | SW | 65 | V | Note 2 | 2 | ||
| VIN Voltage | VIN | 42 | V | 2 | |||
| Current Into RFB | 200 | µA | 2 | ||||
| INTVCC, RREF, TC Voltage | 4 | V | 2 | ||||
| Operating Junction Temperature Range (LT8302E) | TJ | -40 | 125 | °C | Notes 3, 4 | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 33 | °C/W | S8E package | 2 |
CAD (KiCad official)
- Symbol:
LT8302ES8E#TRPBF - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
lt8302es8e-trpbf-etched.step/lt8302es8e-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8302es8e-trpbf.step/lt8302es8e-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
08515683bcc0fb0a, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT8302ES8E#TRPBF
**Analog Devices** · DC-DC Converters · SOIC-8-EP
LT8302ES8E#TRPBF from Analog Devices, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Enable/undervoltage lockout pin with accurate 1.214V threshold; pull below 0.3V to shut down, program VIN UVLO with a resistor divider (2.5µA hysteresis current), or tie to VIN if unused. |
| 2 | INTVCC | power_out | Internal 3V linear regulator output powering internal control circuitry and gate driver; do not overdrive externally and bypass locally with at least 1µF ceramic capacitor. |
| 3 | VIN | power_in | Input supply (3V to 42V) for internal circuitry and reference for the RFB feedback circuit; bypass locally to ground with a capacitor. |
| 4 | GND | power_in | Ground pin, connected together with exposed pad pin 9. |
| 5 | SW | passive | Drain of the internal DMOS power switch rated 65V; minimize trace area to reduce EMI and voltage spikes. |
| 6 | RFB | input | Input for external feedback resistor connected to the transformer primary SW pin; the RFB/RREF ratio times the internal reference sets the output voltage, and trace area should be minimized. |
| 7 | RREF | input | Input for external ground-referred reference resistor, nominally 10k with a range of 9.09k to 11.0k. |
| 8 | TC | output | Output voltage temperature compensation pin with PTAT voltage of 1V at 25°C (3.35mV/°K); connect a resistor to RREF to compensate the output diode temperature coefficient. |
| 9 | GND | power_in | Exposed pad is ground and must be soldered to the PCB ground plane for electrical and thermal contact. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Voltage Range | VIN | 3 | | 42 | V | full operating temperature range | 3 |
| VIN Quiescent Current, shutdown | IQ | | 0.5 | 2 | µA | VEN/UVLO = 0.2V | 3 |
| VIN Quiescent Current, Sleep Mode (Switch Off) | IQ | | 106 | | µA | VEN/UVLO = 1.1V, Sleep Mode (Switch Off) | 3 |
| VIN Quiescent Current, Active Mode (Switch On) | IQ | | 380 | | µA | VEN/UVLO = 1.1V, Active Mode (Switch On) | 3 |
| EN/UVLO Shutdown Threshold For Lowest Off IQ | | 0.2 | | 0.75 | V | full operating temperature range | 3 |
| EN/UVLO Enable Threshold Falling (E, I, H, MP Grades) | | 1.178 | 1.214 | 1.25 | V | full operating temperature range | 3 |
| EN/UVLO Enable Hysteresis | | | 14 | | mV | | 3 |
| EN/UVLO Hysteresis Current | IHYS | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 0.3V | 3 |
| EN/UVLO Hysteresis Current | IHYS | 2.3 | 2.5 | 2.7 | µA | VEN/UVLO = 1.1V | 3 |
| INTVCC Regulation Voltage | VINTVCC | 2.85 | 3 | 3.1 | V | IINTVCC = 0mA to 10mA | 3 |
| INTVCC Current Limit | IINTVCC | 10 | 13 | 20 | mA | VINTVCC = 2.8V | 3 |
| INTVCC UVLO Threshold Falling | | 2.39 | 2.47 | 2.55 | V | | 3 |
| INTVCC UVLO Hysteresis | | | 105 | | mV | | 3 |
| (RFB, VIN) Voltage | | -50 | | 50 | mV | IRFB = 75µA to 125µA | 3 |
| RREF Regulation Voltage | | 0.98 | 1 | 1.02 | V | full operating temperature range | 3 |
| RREF Regulation Voltage Line Regulation | | -0.01 | 0 | 0.01 | %/V | 3V ≤ VIN ≤ 42V | 3 |
| TC Pin Voltage | VTC | | 1 | | V | | 3 |
| TC Pin Current | ITC | 12 | 15 | 18 | µA | VTC = 1.2V (LT8302) | 3 |
| TC Pin Current | ITC | | -200 | | µA | VTC = 0.8V | 3 |
| Minimum Switching Frequency | fMIN | 11.3 | 12 | 12.7 | kHz | | 3 |
| Minimum Switch-On Time | tON(MIN) | | 160 | | ns | | 3 |
| Maximum Switch-Off Time | tOFF(MAX) | | 170 | | µs | Backup Timer | 3 |
| Maximum Switch Current Limit | ISW(MAX) | 3.6 | 4.5 | 5.4 | A | | 3 |
| Minimum Switch Current Limit | ISW(MIN) | 0.7 | 0.87 | 1.04 | A | | 3 |
| Switch On-Resistance | RDS(ON) | | 80 | | mΩ | ISW = 1.5A | 3 |
| Switch Leakage Current | ILKG | | 0.1 | 0.5 | µA | VSW = 65V | 3 |
| Soft-Start Timer | tSS | | 11 | | ms | | 3 |
| SW Voltage | SW | | | 65 | V | Note 2 | 2 |
| VIN Voltage | VIN | | | 42 | V | | 2 |
| Current Into RFB | | | | 200 | µA | | 2 |
| INTVCC, RREF, TC Voltage | | | | 4 | V | | 2 |
| Operating Junction Temperature Range (LT8302E) | TJ | -40 | | 125 | °C | Notes 3, 4 | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 33 | | °C/W | S8E package | 2 |
## CAD (KiCad official)
- Symbol: `LT8302ES8E#TRPBF`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `lt8302es8e-trpbf-etched.step` / `lt8302es8e-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt8302es8e-trpbf.step` / `lt8302es8e-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LT8302-8302-3.pdf) (26 pp, sha256 `08515683bcc0fb0a`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt8302es8e-trpbf-datasheet.pdf)