main
Ray
Publish 0.1.0
72c2815
LT8301MPS5#TRMPBF
Analog Devices · DC-DC Converters · TSOT-23-5
LT8301MPS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Pulling this pin below 0.2V shuts down the LT8301, and its accurate 1.228V threshold can be used with a resistor divider from VIN to program an undervoltage lockout. |
| 2 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 3 | RFB | input | Feedback input where an external resistor connects to the transformer primary SW pin; its ratio to an internal 10k resistor and the trimmed 1.0V reference sets the output voltage. |
| 4 | SW | passive | Drain of the 65V internal DMOS power switch, and trace area at this pin should be minimized to reduce EMI and voltage spikes. |
| 5 | VIN | power_in | Input supply that powers internal circuitry and serves as the reference for the RFB feedback circuit, operating from 2.7V to 42V and locally bypassed to ground with a capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.7 | 42 | V | l: full operating temperature range | 3 | |
| EN/UVLO Enable Threshold Falling | 1.204 | 1.228 | 1.248 | V | 3 | ||
| EN/UVLO Shutdown Threshold For Lowest Off IQ | 0.2 | 0.55 | V | l: full operating temperature range | 3 | ||
| EN/UVLO Hysteresis Current | IHYS | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 0.2V | 3 |
| EN/UVLO Hysteresis Current | IHYS | 2.2 | 2.5 | 2.8 | µA | VEN/UVLO = 1.1V | 3 |
| Minimum Switching Frequency | fMIN | 9.4 | 10 | 10.6 | kHz | 3 | |
| Maximum SW Current Limit | ISW(MAX) | 1.2 | 1.375 | 1.55 | A | l: full operating temperature range | 3 |
| Minimum SW Current Limit | ISW(MIN) | 0.22 | 0.29 | 0.36 | A | l: full operating temperature range | 3 |
| Switch Leakage Current | ILKG | 0.1 | 0.5 | µA | VIN = 42V, VSW = 65V | 3 | |
| RFB Regulation Current | IRFB | 97.5 | 100 | 102.5 | µA | l: full operating temperature range | 3 |
| RFB Regulation Current Line Regulation | 0.02 | 0.1 | %/V | 2.7V ≤ VIN ≤ 42V | 3 | ||
| SW Pin Voltage | SW | 65 | V | Note 2 (rated to 65V for transients) | 2 | ||
| VIN Pin Voltage | VIN | 42 | V | 2 | |||
| Current into RFB | 200 | µA | 2 | ||||
| Operating Junction Temperature Range | TJ | -55 | 150 | °C | LT8301MP | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 150 | °C/W | 5-lead plastic TSOT-23 package (S5) | 2 |
CAD (KiCad official)
- Symbol:
LT8301MPS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt8301mps5-trmpbf-etched.step/lt8301mps5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8301mps5-trmpbf.step/lt8301mps5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
ccd1820493fb3148, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT8301MPS5#TRMPBF
**Analog Devices** · DC-DC Converters · TSOT-23-5
LT8301MPS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Pulling this pin below 0.2V shuts down the LT8301, and its accurate 1.228V threshold can be used with a resistor divider from VIN to program an undervoltage lockout. |
| 2 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 3 | RFB | input | Feedback input where an external resistor connects to the transformer primary SW pin; its ratio to an internal 10k resistor and the trimmed 1.0V reference sets the output voltage. |
| 4 | SW | passive | Drain of the 65V internal DMOS power switch, and trace area at this pin should be minimized to reduce EMI and voltage spikes. |
| 5 | VIN | power_in | Input supply that powers internal circuitry and serves as the reference for the RFB feedback circuit, operating from 2.7V to 42V and locally bypassed to ground with a capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.7 | | 42 | V | l: full operating temperature range | 3 |
| EN/UVLO Enable Threshold Falling | | 1.204 | 1.228 | 1.248 | V | | 3 |
| EN/UVLO Shutdown Threshold For Lowest Off IQ | | 0.2 | | 0.55 | V | l: full operating temperature range | 3 |
| EN/UVLO Hysteresis Current | IHYS | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 0.2V | 3 |
| EN/UVLO Hysteresis Current | IHYS | 2.2 | 2.5 | 2.8 | µA | VEN/UVLO = 1.1V | 3 |
| Minimum Switching Frequency | fMIN | 9.4 | 10 | 10.6 | kHz | | 3 |
| Maximum SW Current Limit | ISW(MAX) | 1.2 | 1.375 | 1.55 | A | l: full operating temperature range | 3 |
| Minimum SW Current Limit | ISW(MIN) | 0.22 | 0.29 | 0.36 | A | l: full operating temperature range | 3 |
| Switch Leakage Current | ILKG | | 0.1 | 0.5 | µA | VIN = 42V, VSW = 65V | 3 |
| RFB Regulation Current | IRFB | 97.5 | 100 | 102.5 | µA | l: full operating temperature range | 3 |
| RFB Regulation Current Line Regulation | | | 0.02 | 0.1 | %/V | 2.7V ≤ VIN ≤ 42V | 3 |
| SW Pin Voltage | SW | | | 65 | V | Note 2 (rated to 65V for transients) | 2 |
| VIN Pin Voltage | VIN | | | 42 | V | | 2 |
| Current into RFB | | | | 200 | µA | | 2 |
| Operating Junction Temperature Range | TJ | -55 | | 150 | °C | LT8301MP | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 150 | | °C/W | 5-lead plastic TSOT-23 package (S5) | 2 |
## CAD (KiCad official)
- Symbol: `LT8301MPS5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lt8301mps5-trmpbf-etched.step` / `lt8301mps5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt8301mps5-trmpbf.step` / `lt8301mps5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LT8301.pdf) (24 pp, sha256 `ccd1820493fb3148`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt8301mps5-trmpbf-datasheet.pdf)