3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT8300IS5#TRPBF
Analog Devices · DC-DC Converters · TSOT-23-5
LT8300IS5#TRPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Enable/undervoltage lockout pin: pulling it below 0.3V shuts down the LT8300, and its accurate 1.223V threshold can program a VIN UVLO divider with 2.5µA hysteresis current. |
| 2 | GND | power_in | Ground pin, to be tied directly to the local ground plane. |
| 3 | RFB | input | Input for the external feedback resistor connected from this pin to the transformer primary SW pin; its ratio to the internal trimmed 12.23k resistor, times the bandgap reference, sets the output voltage, and trace area should be minimized. |
| 4 | SW | output | Drain of the 150V internal DMOS power switch; minimize trace area at this pin to reduce EMI and voltage spikes. |
| 5 | VIN | power_in | Input supply that powers the internal circuitry and serves as the reference voltage for the RFB feedback circuitry, and should be locally bypassed to ground with a capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input Voltage Range | VIN | 6 | 100 | V | 3 | ||
| VIN Absolute Maximum | VIN | 100 | V | 2 | |||
| SW Absolute Maximum | 150 | V | Note 2 | 2 | |||
| Current into RFB | 200 | µA | 2 | ||||
| Operating Junction Temperature Range LT8300I | TJ | -40 | 125 | °C | LT8300I | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| VIN UVLO Threshold Rising | VIN UVLO | 5.8 | 6 | V | Rising | 3 | |
| VIN UVLO Threshold Falling | VIN UVLO | 3.2 | V | Falling | 3 | ||
| EN/UVLO Shutdown Threshold For Lowest Off IQ | EN/UVLO | 0.3 | 0.75 | V | For Lowest Off IQ | 3 | |
| EN/UVLO Enable Threshold Falling | EN/UVLO | 1.199 | 1.223 | 1.27 | V | Falling | 3 |
| IHYS EN/UVLO Hysteresis Current | IHYS | -0.1 | 0 | 0.1 | µA | VEN/UVLO = 0.3V | 3 |
| IHYS EN/UVLO Hysteresis Current | IHYS | 2.2 | 2.5 | 2.8 | µA | VEN/UVLO = 1.1V | 3 |
| VIN Quiescent Current Sleep Mode | IQ | 70 | µA | VEN/UVLO = 0.3V, Sleep Mode (Switch Off) | 3 | ||
| VIN Quiescent Current Active Mode | IQ | 200 | 330 | µA | VEN/UVLO = 1.1V, Active Mode (Switch On) | 3 | |
| Maximum Switching Frequency | fMAX | 720 | 750 | 780 | kHz | 3 | |
| Minimum Switching Frequency | fMIN | 6 | 7.5 | 9 | kHz | 3 | |
| Maximum SW Current Limit | ISW(MAX) | 228 | 260 | 292 | mA | 3 | |
| Minimum SW Current Limit | ISW(MIN) | 34 | 52 | 70 | mA | 3 | |
| Switch Leakage Current | ILKG | 0.1 | 0.5 | µA | VIN = 100V, VSW = 150V | 3 | |
| RFB Regulation Current | IRFB | 98 | 100 | 102 | µA | 3 | |
| RFB Regulation Current Line Regulation | 0.001 | 0.01 | %/V | 6V ≤ VIN ≤ 100V | 3 | ||
| Minimum Switch-On Time | tON(MIN) | 160 | ns | 3 | |||
| Minimum Switch-Off Time | tOFF(MIN) | 350 | ns | 3 | |||
| Maximum Switch-Off Time Backup Timer | tOFF(MAX) | 200 | µs | 3 | |||
| SW Over Current Limit To Initiate Soft-Start | 520 | mA | 3 | ||||
| Switch On-Resistance | RDS(ON) | 10 | Ω | ISW = 100mA | 3 | ||
| Soft-Start Timer | tSS | 2.7 | ms | 3 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 150 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT8300IS5#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt8300is5-trpbf-etched.step/lt8300is5-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8300is5-trpbf.step/lt8300is5-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
a4e1bd3ebe4babcc, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).