main
Ray
Publish 0.1.0
bb0c863
LT6657BHMS8-2.5#TRPBF
Analog Devices · Voltage References · MSOP-8
LT6657BHMS8-2.5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 2 | VIN | power_in | Input voltage supply from (VOUT + 50mV) up to 40V, to be bypassed with a local 0.1µF (1µF for 1.25V) or larger capacitor to GND. |
| 3 | SHDN | input | Active-low shutdown input that reduces supply current to <2µA, must be driven externally and tied to VIN if unused. |
| 4 | GND | power_in | Device ground that must be connected to a noise-free ground plane, with star-ground recommended since it carries supply return current. |
| 5 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 6 | VOUT | output | Reference output voltage pin that can source and sink current, requiring an output capacitor of 1µF (2.7µF for 1.25V) or higher for stability. |
| 7 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 8 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -0.1 | 0 | 0.1 | % | TA = 25°C | 3 | |
| Output Voltage Temperature Coefficient (LT6657B) | 1 | 3 | ppm/°C | LT6657B, full temperature range | 3 | ||
| Line Regulation | 0.2 | 2 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V | 3 | ||
| Line Regulation (full temperature range) | 4 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V, over full temperature range | 3 | |||
| Load Regulation (Source) | 2 | 6 | µV/mA | IOUT (Source) = 10mA | 3 | ||
| Load Regulation (Source, full temperature range) | 10 | µV/mA | IOUT (Source) = 10mA, over full temperature range | 3 | |||
| Load Regulation (Sink) | 3 | 8 | µV/mA | IOUT (Sink) = 10mA | 3 | ||
| Load Regulation (Sink, full temperature range) | 15 | µV/mA | IOUT (Sink) = 10mA, over full temperature range | 3 | |||
| Shunt Configuration Load Regulation | 3 | 15 | µV/mA | VOUT shorted to VIN, ISHUNT 2.5 to 11mA, full temperature range | 3 | ||
| Minimum VIN, VOUT | 20 | 50 | mV | ΔVOUT = 0.1%, IOUT = 0mA | 3 | ||
| Minimum VIN, VOUT | 65 | 100 | mV | ΔVOUT = 0.1%, IOUT (Source) = 1mA | 3 | ||
| Minimum VIN, VOUT | 330 | 450 | mV | ΔVOUT = 0.1%, IOUT (Source) = 10mA | 3 | ||
| Minimum VIN, VOUT | -230 | -150 | -50 | mV | ΔVOUT = 0.1%, IOUT (Sink) = 10mA | 3 | |
| Shutdown Logic High Input Voltage | 1.6 | V | All, except LT6657-1.25, full temperature range | 4 | |||
| Shutdown Logic Low Input Voltage | 0.2 | 0.8 | V | All, except LT6657-1.25, full temperature range | 4 | ||
| Supply Current in Shutdown | 0.01 | 4 | µA | SHDN = 0.4V | 4 | ||
| Supply Current in Shutdown | 2 | 20 | µA | SHDN = 0.8V | 4 | ||
| Supply Current No Load | 1.2 | 1.8 | mA | No load | 4 | ||
| Supply Current No Load (full temperature range) | 2.3 | mA | No load, over full temperature range | 4 | |||
| Output Short-Circuit Current | 15 | mA | Short VOUT to GND | 4 | |||
| Output Short-Circuit Current | 16 | mA | Short VOUT to VIN | 4 | |||
| Output Voltage Noise | 0.5 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 | |||
| Output Voltage Noise | 0.8 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 | |||
| Turn-On Time | 180 | µsec | 0.1% Settling, COUT = 1µF | 4 | |||
| Long-Term Drift of Output Voltage | 30 | ppm/√kHr | 4 | ||||
| Hysteresis | 20 | ppm | ΔT = 0°C to 50°C | 4 | |||
| Hysteresis | 24 | ppm | ΔT = 0°C to 70°C | 4 | |||
| Hysteresis | 30 | ppm | ΔT = -40°C to 85°C | 4 | |||
| Hysteresis | 35 | ppm | ΔT = -40°C to 125°C | 4 | |||
| Hysteresis | 40 | ppm | ΔT = -55°C to 125°C | 4 | |||
| Input Voltage | VIN | -40 | 40 | V | VIN to GND | 2 | |
| Shutdown Voltage | SHDN | -20 | 40 | V | 2 | ||
| Output Voltage | VOUT | -3 | 30 | V | 2 | ||
| Input-to-Output Differential Voltage | -40 | 40 | V | Note 2 | 2 | ||
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Specified Temperature Range | -40 | 125 | °C | LT6657BHMS8-2.5 | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 273 | °C/W | MS8 package | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT6657BHMS8-2.5#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6657bhms8-2-5-trpbf-etched.step/lt6657bhms8-2-5-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6657bhms8-2-5-trpbf.step/lt6657bhms8-2-5-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b937136e51511f97, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6657BHMS8-2.5#TRPBF
**Analog Devices** · Voltage References · MSOP-8
LT6657BHMS8-2.5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 2 | VIN | power_in | Input voltage supply from (VOUT + 50mV) up to 40V, to be bypassed with a local 0.1µF (1µF for 1.25V) or larger capacitor to GND. |
| 3 | SHDN | input | Active-low shutdown input that reduces supply current to <2µA, must be driven externally and tied to VIN if unused. |
| 4 | GND | power_in | Device ground that must be connected to a noise-free ground plane, with star-ground recommended since it carries supply return current. |
| 5 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 6 | VOUT | output | Reference output voltage pin that can source and sink current, requiring an output capacitor of 1µF (2.7µF for 1.25V) or higher for stability. |
| 7 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
| 8 | DNC | unconnected | Do not connect or electrically stress this pin; it is connected internally and must be left floating with minimal leakage and extra routing clearance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | | -0.1 | 0 | 0.1 | % | TA = 25°C | 3 |
| Output Voltage Temperature Coefficient (LT6657B) | | | 1 | 3 | ppm/°C | LT6657B, full temperature range | 3 |
| Line Regulation | | | 0.2 | 2 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V | 3 |
| Line Regulation (full temperature range) | | | | 4 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V, over full temperature range | 3 |
| Load Regulation (Source) | | | 2 | 6 | µV/mA | IOUT (Source) = 10mA | 3 |
| Load Regulation (Source, full temperature range) | | | | 10 | µV/mA | IOUT (Source) = 10mA, over full temperature range | 3 |
| Load Regulation (Sink) | | | 3 | 8 | µV/mA | IOUT (Sink) = 10mA | 3 |
| Load Regulation (Sink, full temperature range) | | | | 15 | µV/mA | IOUT (Sink) = 10mA, over full temperature range | 3 |
| Shunt Configuration Load Regulation | | | 3 | 15 | µV/mA | VOUT shorted to VIN, ISHUNT 2.5 to 11mA, full temperature range | 3 |
| Minimum VIN, VOUT | | | 20 | 50 | mV | ΔVOUT = 0.1%, IOUT = 0mA | 3 |
| Minimum VIN, VOUT | | | 65 | 100 | mV | ΔVOUT = 0.1%, IOUT (Source) = 1mA | 3 |
| Minimum VIN, VOUT | | | 330 | 450 | mV | ΔVOUT = 0.1%, IOUT (Source) = 10mA | 3 |
| Minimum VIN, VOUT | | -230 | -150 | -50 | mV | ΔVOUT = 0.1%, IOUT (Sink) = 10mA | 3 |
| Shutdown Logic High Input Voltage | | | | 1.6 | V | All, except LT6657-1.25, full temperature range | 4 |
| Shutdown Logic Low Input Voltage | | 0.2 | | 0.8 | V | All, except LT6657-1.25, full temperature range | 4 |
| Supply Current in Shutdown | | | 0.01 | 4 | µA | SHDN = 0.4V | 4 |
| Supply Current in Shutdown | | | 2 | 20 | µA | SHDN = 0.8V | 4 |
| Supply Current No Load | | | 1.2 | 1.8 | mA | No load | 4 |
| Supply Current No Load (full temperature range) | | | | 2.3 | mA | No load, over full temperature range | 4 |
| Output Short-Circuit Current | | | 15 | | mA | Short VOUT to GND | 4 |
| Output Short-Circuit Current | | | 16 | | mA | Short VOUT to VIN | 4 |
| Output Voltage Noise | | | 0.5 | | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 |
| Output Voltage Noise | | | 0.8 | | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 |
| Turn-On Time | | | 180 | | µsec | 0.1% Settling, COUT = 1µF | 4 |
| Long-Term Drift of Output Voltage | | | 30 | | ppm/√kHr | | 4 |
| Hysteresis | | | 20 | | ppm | ΔT = 0°C to 50°C | 4 |
| Hysteresis | | | 24 | | ppm | ΔT = 0°C to 70°C | 4 |
| Hysteresis | | | 30 | | ppm | ΔT = -40°C to 85°C | 4 |
| Hysteresis | | | 35 | | ppm | ΔT = -40°C to 125°C | 4 |
| Hysteresis | | | 40 | | ppm | ΔT = -55°C to 125°C | 4 |
| Input Voltage | VIN | -40 | | 40 | V | VIN to GND | 2 |
| Shutdown Voltage | SHDN | -20 | | 40 | V | | 2 |
| Output Voltage | VOUT | -3 | | 30 | V | | 2 |
| Input-to-Output Differential Voltage | | -40 | | 40 | V | Note 2 | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Specified Temperature Range | | -40 | | 125 | °C | LT6657BHMS8-2.5 | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 273 | | °C/W | MS8 package | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | MS8 package | 2 |
## CAD (KiCad official)
- Symbol: `LT6657BHMS8-2.5#TRPBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lt6657bhms8-2-5-trpbf-etched.step` / `lt6657bhms8-2-5-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6657bhms8-2-5-trpbf.step` / `lt6657bhms8-2-5-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6657fd.pdf) (24 pp, sha256 `b937136e51511f97`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6657bhms8-2-5-trpbf-datasheet.pdf)