main
Ray
Publish 0.1.0
09c70fe
LT6657AHMS8-5#PBF
Analog Devices · Voltage References · MSOP-8
LT6657AHMS8-5#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 2 | VIN | power_in | Input voltage supply that should be bypassed to GND with a local 0.1µF (1µF for the 1.25V option) or larger capacitor, and the part operates with (VOUT + 50mV) < VIN < 40V. |
| 3 | SHDN | input | Active-low shutdown input that must be driven externally to reduce supply current below 2µA, tied to VIN if unused, and may be driven to logic high or to VIN during normal operation. |
| 4 | GND | power_in | Device ground that must be connected to a noise-free ground plane, carrying the supply return current, so trace impedance should be kept low. |
| 5 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 6 | VOUT | power_out | Reference output that can source and sink load current and requires an output capacitor of 1µF (2.7µF for the 1.25V option) or higher for stability. |
| 7 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 8 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -0.1 | 0 | 0.1 | % | 3 | ||
| Output Voltage Temperature Coefficient (LT6657A) | 0.5 | 1.5 | ppm/°C | LT6657A | 3 | ||
| Line Regulation (A grade) | 0.2 | 2 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V | 3 | ||
| Load Regulation IOUT (Source) | 2 | 6 | µV/mA | IOUT (Source) = 10mA | 3 | ||
| Load Regulation IOUT (Sink) | 3 | 8 | µV/mA | IOUT (Sink) = 10mA | 3 | ||
| Shunt Configuration Load Regulation | 3 | 15 | µV/mA | Shunt configuration, VOUT shorted to VIN, ISHUNT 2.5 to 11mA | 3 | ||
| Minimum VIN, VOUT | 20 | 50 | 70 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT = 0mA | 3 | |
| Minimum VIN, VOUT | 65 | 100 | 140 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Source) = 1mA | 3 | |
| Minimum VIN, VOUT | 330 | 450 | 500 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Source) = 10mA | 3 | |
| Minimum VIN, VOUT | -230 | -150 | -50 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Sink) = 10mA | 3 | |
| Shutdown Logic High Input Voltage | 1.6 | V | 4 | ||||
| Shutdown Logic High Input Current | 0.7 | 2 | µV | SHDN = 1.6V | 4 | ||
| Shutdown Logic Low Input Voltage | 0.2 | 0.8 | V | 4 | |||
| Shutdown Logic Low Input Current | 1 | µV | SHDN = 0.8V | 4 | |||
| Supply Current in Shutdown | 0.01 | 4 | µA | SHDN = 0.4V | 4 | ||
| Supply Current in Shutdown | 2 | 20 | µA | SHDN = 0.8V | 4 | ||
| Supply Current No Load | 1.2 | 2.3 | mA | No load | 4 | ||
| Output Short-Circuit Current | 15 | mA | Short VOUT to GND | 4 | |||
| Output Short-Circuit Current | 16 | mA | Short VOUT to VIN | 4 | |||
| Output Voltage Noise (0.1Hz to 10Hz) | 0.5 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 | |||
| Output Voltage Noise (10Hz to 1kHz) | 0.8 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 | |||
| Turn-On Time | 180 | µsec | 0.1% Settling, COUT = 1µF | 4 | |||
| Long-Term Drift of Output Voltage | 30 | ppm/√kHr | 4 | ||||
| Hysteresis | 20 | ppm | ΔT = 0°C to 50°C | 4 | |||
| Hysteresis | 24 | ppm | ΔT = 0°C to 70°C | 4 | |||
| Hysteresis | 30 | ppm | ΔT = -40°C to 85°C | 4 | |||
| Hysteresis | 35 | ppm | ΔT = -40°C to 125°C | 4 | |||
| Hysteresis | 40 | ppm | ΔT = -55°C to 125°C | 4 | |||
| Input Voltage VIN (to GND) | VIN | -40 | 40 | V | to GND | 2 | |
| Shutdown Voltage | SHDN | -20 | 40 | V | 2 | ||
| Output Voltage | VOUT | -3 | 30 | V | 2 | ||
| Input-to-Output Differential Voltage | -40 | 40 | V | Note 2 | 2 | ||
| Operating Junction Temperature Range | -40 | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 273 | °C/W | MS8 (MSOP-8) package | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Input Voltage VIN | VIN | 40 | V | (VOUT + 50mV) < VIN < 40V | 1 | ||
| Specified Operating Temperature Range | -40 | 125 | °C | Fully specified over temperature range | 1 |
CAD (KiCad official)
- Symbol:
LT6657AHMS8-5#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6657ahms8-5-pbf-etched.step/lt6657ahms8-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6657ahms8-5-pbf.step/lt6657ahms8-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b937136e51511f97, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6657AHMS8-5#PBF
**Analog Devices** · Voltage References · MSOP-8
LT6657AHMS8-5#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 2 | VIN | power_in | Input voltage supply that should be bypassed to GND with a local 0.1µF (1µF for the 1.25V option) or larger capacitor, and the part operates with (VOUT + 50mV) < VIN < 40V. |
| 3 | SHDN | input | Active-low shutdown input that must be driven externally to reduce supply current below 2µA, tied to VIN if unused, and may be driven to logic high or to VIN during normal operation. |
| 4 | GND | power_in | Device ground that must be connected to a noise-free ground plane, carrying the supply return current, so trace impedance should be kept low. |
| 5 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 6 | VOUT | power_out | Reference output that can source and sink load current and requires an output capacitor of 1µF (2.7µF for the 1.25V option) or higher for stability. |
| 7 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
| 8 | DNC | unconnected | Internal connection that must be left floating; do not connect external circuitry or electrically stress it, and keep leakage current from this pin to a minimum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | | -0.1 | 0 | 0.1 | % | | 3 |
| Output Voltage Temperature Coefficient (LT6657A) | | | 0.5 | 1.5 | ppm/°C | LT6657A | 3 |
| Line Regulation (A grade) | | | 0.2 | 2 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V | 3 |
| Load Regulation IOUT (Source) | | | 2 | 6 | µV/mA | IOUT (Source) = 10mA | 3 |
| Load Regulation IOUT (Sink) | | | 3 | 8 | µV/mA | IOUT (Sink) = 10mA | 3 |
| Shunt Configuration Load Regulation | | | 3 | 15 | µV/mA | Shunt configuration, VOUT shorted to VIN, ISHUNT 2.5 to 11mA | 3 |
| Minimum VIN, VOUT | | 20 | 50 | 70 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT = 0mA | 3 |
| Minimum VIN, VOUT | | 65 | 100 | 140 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Source) = 1mA | 3 |
| Minimum VIN, VOUT | | 330 | 450 | 500 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Source) = 10mA | 3 |
| Minimum VIN, VOUT | | -230 | -150 | -50 | mV | VIN, VOUT, ΔVOUT = 0.1%, IOUT (Sink) = 10mA | 3 |
| Shutdown Logic High Input Voltage | | 1.6 | | | V | | 4 |
| Shutdown Logic High Input Current | | | 0.7 | 2 | µV | SHDN = 1.6V | 4 |
| Shutdown Logic Low Input Voltage | | | 0.2 | 0.8 | V | | 4 |
| Shutdown Logic Low Input Current | | | | 1 | µV | SHDN = 0.8V | 4 |
| Supply Current in Shutdown | | | 0.01 | 4 | µA | SHDN = 0.4V | 4 |
| Supply Current in Shutdown | | | 2 | 20 | µA | SHDN = 0.8V | 4 |
| Supply Current No Load | | | 1.2 | 2.3 | mA | No load | 4 |
| Output Short-Circuit Current | | | 15 | | mA | Short VOUT to GND | 4 |
| Output Short-Circuit Current | | | 16 | | mA | Short VOUT to VIN | 4 |
| Output Voltage Noise (0.1Hz to 10Hz) | | | 0.5 | | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 |
| Output Voltage Noise (10Hz to 1kHz) | | | 0.8 | | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 |
| Turn-On Time | | | 180 | | µsec | 0.1% Settling, COUT = 1µF | 4 |
| Long-Term Drift of Output Voltage | | | 30 | | ppm/√kHr | | 4 |
| Hysteresis | | | 20 | | ppm | ΔT = 0°C to 50°C | 4 |
| Hysteresis | | | 24 | | ppm | ΔT = 0°C to 70°C | 4 |
| Hysteresis | | | 30 | | ppm | ΔT = -40°C to 85°C | 4 |
| Hysteresis | | | 35 | | ppm | ΔT = -40°C to 125°C | 4 |
| Hysteresis | | | 40 | | ppm | ΔT = -55°C to 125°C | 4 |
| Input Voltage VIN (to GND) | VIN | -40 | | 40 | V | to GND | 2 |
| Shutdown Voltage | SHDN | -20 | | 40 | V | | 2 |
| Output Voltage | VOUT | -3 | | 30 | V | | 2 |
| Input-to-Output Differential Voltage | | -40 | | 40 | V | Note 2 | 2 |
| Operating Junction Temperature Range | | -40 | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 273 | | °C/W | MS8 (MSOP-8) package | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Input Voltage VIN | VIN | | | 40 | V | (VOUT + 50mV) < VIN < 40V | 1 |
| Specified Operating Temperature Range | | -40 | | 125 | °C | Fully specified over temperature range | 1 |
## CAD (KiCad official)
- Symbol: `LT6657AHMS8-5#PBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lt6657ahms8-5-pbf-etched.step` / `lt6657ahms8-5-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6657ahms8-5-pbf.step` / `lt6657ahms8-5-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6657fd.pdf) (24 pp, sha256 `b937136e51511f97`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6657ahms8-5-pbf-datasheet.pdf)