main
Ray
Publish 0.1.0
80e1f45
LT6650IS5#TRMPBF
Analog Devices · Voltage References · TSOT-23-5
LT6650IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Resistor divider feedback pin: connect a resistor divider from OUT to GND with the center tap to FB to set the output potential; if FB is driven below -0.3V, its input current must be limited to less than 10mA. |
| 2 | GND | power_in | Ground connection for the device. |
| 3 | DNC | unconnected | Do not connect: this pin is connected internally for post-package trim and must be left unconnected. |
| 4 | IN | power_in | Positive supply input, operating from 1.4V to 18V; bypassing with a 1µF capacitor is recommended if the output loading changes. |
| 5 | OUT | power_out | Reference output that sources and sinks current and is stable with a total load capacitance of 1µF or more, with higher capacitance improving load transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (over temperature) | VOUT | 396 | 400 | 404 | mV | Over operating temperature range (●); VIN = 5V, CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 2 |
| Output Voltage accuracy (over temperature) | VOUT | -1 | 1 | % | Over operating temperature range (●); VIN = 5V, CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 2 | |
| Operating Input Voltage | VIN | 1.4 | 18 | V | 2 | ||
| Line Regulation (over temperature) | ∆VOUT/∆VIN | 7.5 | mV | 1.4V ≤ VIN ≤ 18V; over operating temperature range (●) | 2 | ||
| Line Regulation (over temperature) | ∆VOUT/∆VIN | 1130 | ppm/V | 1.4V ≤ VIN ≤ 18V; over operating temperature range (●) | 2 | ||
| Line Regulation | ∆VOUT/∆VIN | 1 | 6 | mV | 1.4V ≤ VIN ≤ 18V | 2 | |
| Line Regulation | ∆VOUT/∆VIN | 150 | 900 | ppm/V | 1.4V ≤ VIN ≤ 18V | 2 | |
| Load Regulation (sourcing) | ∆VOUT/∆IOUT | -0.04 | -0.2 | mV | Sourcing from 0µA to -200µA | 2 | |
| Load Regulation (sourcing) | ∆VOUT/∆IOUT | 500 | 2500 | ppm/mA | Sourcing from 0µA to -200µA | 2 | |
| Load Regulation (sinking) | ∆VOUT/∆IOUT | 0.24 | 1 | mV | Sinking from 0µA to 200µA | 2 | |
| Load Regulation (sinking) | ∆VOUT/∆IOUT | 3000 | 12500 | ppm/mA | Sinking from 0µA to 200µA | 2 | |
| Output Voltage Temperature Coefficient | TC | 30 | ppm/°C | Over operating temperature range (●); Note 10: change in output voltage divided by specified temperature range | 3 | ||
| Dropout Voltage | ∆VDO | 75 | 100 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 0µA | 3 | |
| Dropout Voltage (over temperature) | ∆VDO | 150 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 0µA; over temperature (●) | 3 | ||
| Dropout Voltage (sourcing) | ∆VDO | 165 | 250 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = -200µA Sourcing | 3 | |
| Dropout Voltage (sourcing, over temperature) | ∆VDO | 350 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = -200µA Sourcing; over temperature (●) | 3 | ||
| Dropout Voltage (sinking) | ∆VDO | -300 | -150 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 200µA Sinking (Note 11) | 3 | |
| Dropout Voltage (sinking, over temperature) | ∆VDO | 0 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 200µA Sinking (Note 11); over temperature (●) | 3 | ||
| Short-Circuit Output Current | ISC | 5 | mA | VOUT Shorted to GND | 3 | ||
| Short-Circuit Output Current | ISC | 9 | mA | VOUT Shorted to VIN | 3 | ||
| Supply Current | IIN | 5.6 | 11 | µA | VIN = 5V (table default); CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 3 | |
| Supply Current (over temperature) | IIN | 14 | µA | VIN = 5V (table default); over operating temperature range (●) | 3 | ||
| Supply Current | IIN | 5.9 | 12 | µA | VIN = 18V | 3 | |
| Supply Current (over temperature) | IIN | 15 | µA | VIN = 18V; over operating temperature range (●) | 3 | ||
| FB Pin Input Current | IFB | 1.2 | 10 | nA | VFB = VOUT = 400mV | 3 | |
| FB Pin Input Current (over temperature) | IFB | 15 | nA | VFB = VOUT = 400mV; over operating temperature range (●) | 3 | ||
| Turn-On Time | TON | 0.5 | ms | CLOAD = 1µF | 3 | ||
| Output Noise (0.1Hz to 10Hz) | en | 20 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 | ||
| Output Noise (10Hz to 1kHz) | en | 23 | µVRMS | 10Hz ≤ f ≤ 1kHz, IOUT = -200µA Sourcing | 3 | ||
| Hysteresis (over temperature) | VHYS | 0.24 | mV | ∆T = -40°C to 85°C; over operating temperature range (●) | 3 | ||
| Hysteresis (over temperature) | VHYS | 600 | ppm | ∆T = -40°C to 85°C; over operating temperature range (●) | 3 | ||
| Total Supply Voltage | VIN | 20 | V | VIN to GND | 2 | ||
| FB Voltage | VFB | -0.3 | 20 | V | Relative to GND; printed as 20V to (GND, 0.3V) | 2 | |
| Output Voltage | VOUT | -0.3 | 20 | V | Relative to GND; printed as 20V to (GND, 0.3V) | 2 | |
| FB Input Current | IFB | 10 | mA | 2 | |||
| Operating Temperature Range | TOP | -40 | 125 | °C | 2 | ||
| Specified Temperature Range (LT6650IS5) | TA | -40 | 85 | °C | LT6650IS5 grade | 2 | |
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 230 | °C/W | TJMAX = 150°C | 2 |
CAD (KiCad official)
- Symbol:
LT6650IS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt6650is5-trmpbf-etched.step/lt6650is5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6650is5-trmpbf.step/lt6650is5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
558074559c454b84, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6650IS5#TRMPBF
**Analog Devices** · Voltage References · TSOT-23-5
LT6650IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Resistor divider feedback pin: connect a resistor divider from OUT to GND with the center tap to FB to set the output potential; if FB is driven below -0.3V, its input current must be limited to less than 10mA. |
| 2 | GND | power_in | Ground connection for the device. |
| 3 | DNC | unconnected | Do not connect: this pin is connected internally for post-package trim and must be left unconnected. |
| 4 | IN | power_in | Positive supply input, operating from 1.4V to 18V; bypassing with a 1µF capacitor is recommended if the output loading changes. |
| 5 | OUT | power_out | Reference output that sources and sinks current and is stable with a total load capacitance of 1µF or more, with higher capacitance improving load transient response. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (over temperature) | VOUT | 396 | 400 | 404 | mV | Over operating temperature range (●); VIN = 5V, CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 2 |
| Output Voltage accuracy (over temperature) | VOUT | -1 | | 1 | % | Over operating temperature range (●); VIN = 5V, CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 2 |
| Operating Input Voltage | VIN | 1.4 | | 18 | V | | 2 |
| Line Regulation (over temperature) | ∆VOUT/∆VIN | | | 7.5 | mV | 1.4V ≤ VIN ≤ 18V; over operating temperature range (●) | 2 |
| Line Regulation (over temperature) | ∆VOUT/∆VIN | | | 1130 | ppm/V | 1.4V ≤ VIN ≤ 18V; over operating temperature range (●) | 2 |
| Line Regulation | ∆VOUT/∆VIN | | 1 | 6 | mV | 1.4V ≤ VIN ≤ 18V | 2 |
| Line Regulation | ∆VOUT/∆VIN | | 150 | 900 | ppm/V | 1.4V ≤ VIN ≤ 18V | 2 |
| Load Regulation (sourcing) | ∆VOUT/∆IOUT | | -0.04 | -0.2 | mV | Sourcing from 0µA to -200µA | 2 |
| Load Regulation (sourcing) | ∆VOUT/∆IOUT | | 500 | 2500 | ppm/mA | Sourcing from 0µA to -200µA | 2 |
| Load Regulation (sinking) | ∆VOUT/∆IOUT | | 0.24 | 1 | mV | Sinking from 0µA to 200µA | 2 |
| Load Regulation (sinking) | ∆VOUT/∆IOUT | | 3000 | 12500 | ppm/mA | Sinking from 0µA to 200µA | 2 |
| Output Voltage Temperature Coefficient | TC | | | 30 | ppm/°C | Over operating temperature range (●); Note 10: change in output voltage divided by specified temperature range | 3 |
| Dropout Voltage | ∆VDO | | 75 | 100 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 0µA | 3 |
| Dropout Voltage (over temperature) | ∆VDO | | | 150 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 0µA; over temperature (●) | 3 |
| Dropout Voltage (sourcing) | ∆VDO | | 165 | 250 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = -200µA Sourcing | 3 |
| Dropout Voltage (sourcing, over temperature) | ∆VDO | | | 350 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = -200µA Sourcing; over temperature (●) | 3 |
| Dropout Voltage (sinking) | ∆VDO | | -300 | -150 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 200µA Sinking (Note 11) | 3 |
| Dropout Voltage (sinking, over temperature) | ∆VDO | | | 0 | mV | Referred to VIN = 1.8V, VOUT = 1.4V (RF = 100k, RG = 39.2k); ∆VOUT = -0.1%, IOUT = 200µA Sinking (Note 11); over temperature (●) | 3 |
| Short-Circuit Output Current | ISC | | 5 | | mA | VOUT Shorted to GND | 3 |
| Short-Circuit Output Current | ISC | | 9 | | mA | VOUT Shorted to VIN | 3 |
| Supply Current | IIN | | 5.6 | 11 | µA | VIN = 5V (table default); CIN = 1µF, FB = OUT, no DC load, CL = 1µF | 3 |
| Supply Current (over temperature) | IIN | | | 14 | µA | VIN = 5V (table default); over operating temperature range (●) | 3 |
| Supply Current | IIN | | 5.9 | 12 | µA | VIN = 18V | 3 |
| Supply Current (over temperature) | IIN | | | 15 | µA | VIN = 18V; over operating temperature range (●) | 3 |
| FB Pin Input Current | IFB | | 1.2 | 10 | nA | VFB = VOUT = 400mV | 3 |
| FB Pin Input Current (over temperature) | IFB | | | 15 | nA | VFB = VOUT = 400mV; over operating temperature range (●) | 3 |
| Turn-On Time | TON | | 0.5 | | ms | CLOAD = 1µF | 3 |
| Output Noise (0.1Hz to 10Hz) | en | | 20 | | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 |
| Output Noise (10Hz to 1kHz) | en | | 23 | | µVRMS | 10Hz ≤ f ≤ 1kHz, IOUT = -200µA Sourcing | 3 |
| Hysteresis (over temperature) | VHYS | | | 0.24 | mV | ∆T = -40°C to 85°C; over operating temperature range (●) | 3 |
| Hysteresis (over temperature) | VHYS | | | 600 | ppm | ∆T = -40°C to 85°C; over operating temperature range (●) | 3 |
| Total Supply Voltage | VIN | | | 20 | V | VIN to GND | 2 |
| FB Voltage | VFB | -0.3 | | 20 | V | Relative to GND; printed as 20V to (GND, 0.3V) | 2 |
| Output Voltage | VOUT | -0.3 | | 20 | V | Relative to GND; printed as 20V to (GND, 0.3V) | 2 |
| FB Input Current | IFB | | | 10 | mA | | 2 |
| Operating Temperature Range | TOP | -40 | | 125 | °C | | 2 |
| Specified Temperature Range (LT6650IS5) | TA | -40 | | 85 | °C | LT6650IS5 grade | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Thermal Resistance, Junction-to-Ambient | θJA | | 230 | | °C/W | TJMAX = 150°C | 2 |
## CAD (KiCad official)
- Symbol: `LT6650IS5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lt6650is5-trmpbf-etched.step` / `lt6650is5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6650is5-trmpbf.step` / `lt6650is5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6650fa.pdf) (12 pp, sha256 `558074559c454b84`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6650is5-trmpbf-datasheet.pdf)