main
Ray Publish 0.1.0 308fa4a
{
  "slug": "lt6557cgn",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Operational Amplifier, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers",
    "lt6557cgn#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt6557cgn.kicad_sym",
    "lt6557cgn.kicad_mod",
    "lt6557cgn.glb",
    "lt6557cgn.step",
    "lt6557cgn.lbr",
    "docs/hero.png",
    "docs/lt6557cgn-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt6557cgn-hero.glb",
    "lt6557cgn-hero.overlay.json",
    "lt6557cgn-etched.glb"
  ],
  "component": {
    "mpn": "LT6557CGN",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "Amplifiers",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/6557fa.pdf",
    "parts": {
      "symbol": "lt6557cgn.kicad_sym",
      "footprint": "lt6557cgn.kicad_mod",
      "model_3d": "lt6557cgn-hero.glb",
      "model_3d_plain": "lt6557cgn-etched.glb",
      "model_3d_step": "lt6557cgn-etched.step",
      "model_3d_step_plain": "lt6557cgn.step",
      "lbr": "lt6557cgn.lbr"
    },
    "distributor_links": {
      "lcsc": "C1523096",
      "digikey": "LT6557CGN#PBF-ND",
      "mouser": "584-LT6557CGN#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T05:55:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT6557CGN#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT6557CGN#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable control pin: the part is enabled when pulled low (about 1.5V below V+ or more), and an internal 40k pull-up turns the part off if the pin is left unconnected."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the Enable pin (Pin 1) and Bias Control Voltage pin (Pin 16); this pin must be connected externally to ground."
      },
      {
        "number": "3",
        "name": "IN R",
        "type": "input",
        "description": "Red channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open)."
      },
      {
        "number": "4",
        "name": "GND R",
        "type": "power_in",
        "description": "Ground of the red channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground."
      },
      {
        "number": "5",
        "name": "IN G",
        "type": "input",
        "description": "Green channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open)."
      },
      {
        "number": "6",
        "name": "GND G",
        "type": "power_in",
        "description": "Ground of the green channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground."
      },
      {
        "number": "7",
        "name": "IN B",
        "type": "input",
        "description": "Blue channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open)."
      },
      {
        "number": "8",
        "name": "GND B",
        "type": "power_in",
        "description": "Ground of the blue channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground."
      },
      {
        "number": "9",
        "name": "V+ B",
        "type": "power_in",
        "description": "Positive supply voltage of the blue channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing."
      },
      {
        "number": "10",
        "name": "OUT B",
        "type": "output",
        "description": "Blue channel output."
      },
      {
        "number": "11",
        "name": "V+ G",
        "type": "power_in",
        "description": "Positive supply voltage of the green channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing."
      },
      {
        "number": "12",
        "name": "OUT G",
        "type": "output",
        "description": "Green channel output."
      },
      {
        "number": "13",
        "name": "V+ R",
        "type": "power_in",
        "description": "Positive supply voltage of the red channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing."
      },
      {
        "number": "14",
        "name": "OUT R",
        "type": "output",
        "description": "Red channel output."
      },
      {
        "number": "15",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply voltage of the control circuitry; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing."
      },
      {
        "number": "16",
        "name": "BCV",
        "type": "passive",
        "description": "Bias control voltage: a resistor between Pin 16 and Pin 2 (GND) sets the DC input bias for the three amplifiers, and leaving the pin open disables the internal biasing."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: V+ pins are typed power_in as supply inputs, and the datasheet describes each as a separate supply p; BCV is typed passive because it is a resistor-programmed node rather than a logic input or supply. T; The datasheet's pin table covers the GN (16-lead SSOP) package only for this part number. The DHC 16"
        ],
        "pages_sent": 12,
        "cost_usd": 0.0621,
        "at": "2026-11-11T05:55:18"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/6557fa.pdf",
        "pages": 12,
        "sha256": "0e0dbc6dd3c3f8bd",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt6557cgn.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt6557cgn-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bac12e8971b89071a1fa41fb3eb08530a68d918b136cf465d9fb03681181e76e",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}