main
Ray
Publish 0.1.0
308fa4a
LT6557CGN#PBF
Analog Devices · Operational Amplifier · SSOP-16-150mil
LT6557CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control pin: the part is enabled when pulled low (about 1.5V below V+ or more), and an internal 40k pull-up turns the part off if the pin is left unconnected. |
| 2 | GND | power_in | Ground reference for the Enable pin (Pin 1) and Bias Control Voltage pin (Pin 16); this pin must be connected externally to ground. |
| 3 | IN R | input | Red channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 4 | GND R | power_in | Ground of the red channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 5 | IN G | input | Green channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 6 | GND G | power_in | Ground of the green channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 7 | IN B | input | Blue channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 8 | GND B | power_in | Ground of the blue channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 9 | V+ B | power_in | Positive supply voltage of the blue channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 10 | OUT B | output | Blue channel output. |
| 11 | V+ G | power_in | Positive supply voltage of the green channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 12 | OUT G | output | Green channel output. |
| 13 | V+ R | power_in | Positive supply voltage of the red channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 14 | OUT R | output | Red channel output. |
| 15 | V+ | power_in | Positive supply voltage of the control circuitry; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 16 | BCV | passive | Bias control voltage: a resistor between Pin 16 and Pin 2 (GND) sets the DC input bias for the three amplifiers, and leaving the pin open disables the internal biasing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 12 | 40 | mV | VIN = 1.25V | 2 | |
| Input Offset Voltage (full operating temperature range) | VOS | 15 | 50 | mV | VIN = 1.25V, ● full operating temperature range | 2 | |
| Input Current | IIN | 35 | 70 | µA | VIN = 1.25V | 2 | |
| Input Current (full operating temperature range) | IIN | 45 | 100 | µA | VIN = 1.25V, ● full operating temperature range | 2 | |
| Input Resistance | RIN | 90 | 200 | kΩ | VIN = 0.75V to 1.75V, BCV (Pin 6) Open | 2 | |
| Input Resistance (full operating temperature range) | RIN | 50 | 150 | kΩ | VIN = 0.75V to 1.75V, BCV (Pin 6) Open, ● full operating temperature range | 2 | |
| Gain Error | AV ERR | -2.5 | 0.5 | 2.5 | % | VIN = 0.75V to 1.75V | 3 |
| Gain Error (full operating temperature range) | AV ERR | -3 | 0.5 | 3 | % | VIN = 0.75V to 1.75V, ● full operating temperature range | 3 |
| Gain Match Between Channels | AV MATCH | -2.75 | 0.4 | 2.75 | % | VIN = 0.75V to 1.75V | 3 |
| Gain Match Between Channels (full operating temperature range) | AV MATCH | -3.25 | 0.4 | 3.25 | % | VIN = 0.75V to 1.75V, ● full operating temperature range | 3 |
| Input Voltage Bias | VIN(DC) | 1 | 1.25 | 1.5 | V | RBCV = 348Ω | 3 |
| Input Voltage Bias (full operating temperature range) | VIN(DC) | 0.8 | 1.1 | 1.7 | V | RBCV = 348Ω, ● full operating temperature range | 3 |
| Power Supply Rejection Ratio | PSRR | 42 | 50 | dB | VS = 4V to 6V, VIN = 1.25V | 3 | |
| Power Supply Rejection Ratio (full operating temperature range) | PSRR | 38 | 47 | dB | VS = 4V to 6V, VIN = 1.25V, ● full operating temperature range | 3 | |
| Output Voltage Swing Low | VOL | 0.8 | 0.9 | V | 3 | ||
| Output Voltage Swing Low (full operating temperature range) | VOL | 0.9 | 1 | V | ● full operating temperature range | 3 | |
| Output Voltage Swing High | VOH | 4.1 | 4.2 | V | 3 | ||
| Output Voltage Swing High (full operating temperature range) | VOH | 4 | 4.1 | V | ● full operating temperature range | 3 | |
| Supply Current per Amplifier | IS | 22.5 | 25 | mA | VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15) | 3 | |
| Supply Current per Amplifier (full operating temperature range) | IS | 25 | 29 | mA | VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15), ● full operating temperature range | 3 | |
| Total Supply Current (Disabled) | 10 | 450 | µA | VEN = Open, RL = ∞ | 3 | ||
| Total Supply Current (Disabled) (full operating temperature range) | 10 | 1000 | µA | VEN = Open, RL = ∞, ● full operating temperature range | 3 | ||
| Enable Pin Current | IEN | -250 | -125 | µA | VEN = 0.4V | 3 | |
| Enable Pin Current (full operating temperature range) | IEN | -300 | -150 | µA | VEN = 0.4V, ● full operating temperature range | 3 | |
| Short-Circuit Current | ISC | -70 | 100 | mA | 3 | ||
| Short-Circuit Current (full operating temperature range) | ISC | -40 | 90 | mA | ● full operating temperature range | 3 | |
| Slew Rate | SR | 1400 | 2200 | V/µs | VOUT = 1.25V to 3.75V (Note 5) | 3 | |
| Full Power Bandwidth | FPBW | 220 | 350 | MHz | VOUT = 2VP-P (Note 6) | 3 | |
| Input Current | -10 | 10 | mA | 2 | |||
| Output Current | -70 | 70 | mA | Note 2 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 3 | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Junction Temperature (SSOP) | TJ | 150 | °C | SSOP package | 2 | ||
| Storage Temperature Range (SSOP) | -65 | 150 | °C | SSOP package | 2 | ||
| Lead Temperature (SSOP) | 300 | °C | Soldering, 10 sec, SSOP package | 2 | |||
| Thermal Resistance Junction-to-Ambient (SSOP) | θJA | 110 | °C/W | SSOP package | 2 | ||
| Supply Range | 3 | 7.5 | V | 1 |
CAD (KiCad official)
- Symbol:
LT6557CGN#PBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
lt6557cgn-etched.step/lt6557cgn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6557cgn.step/lt6557cgn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
0e0dbc6dd3c3f8bd, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6557CGN#PBF
**Analog Devices** · Operational Amplifier · SSOP-16-150mil
LT6557CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable control pin: the part is enabled when pulled low (about 1.5V below V+ or more), and an internal 40k pull-up turns the part off if the pin is left unconnected. |
| 2 | GND | power_in | Ground reference for the Enable pin (Pin 1) and Bias Control Voltage pin (Pin 16); this pin must be connected externally to ground. |
| 3 | IN R | input | Red channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 4 | GND R | power_in | Ground of the red channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 5 | IN G | input | Green channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 6 | GND G | power_in | Ground of the green channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 7 | IN B | input | Blue channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open). |
| 8 | GND B | power_in | Ground of the blue channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground. |
| 9 | V+ B | power_in | Positive supply voltage of the blue channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 10 | OUT B | output | Blue channel output. |
| 11 | V+ G | power_in | Positive supply voltage of the green channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 12 | OUT G | output | Green channel output. |
| 13 | V+ R | power_in | Positive supply voltage of the red channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 14 | OUT R | output | Red channel output. |
| 15 | V+ | power_in | Positive supply voltage of the control circuitry; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing. |
| 16 | BCV | passive | Bias control voltage: a resistor between Pin 16 and Pin 2 (GND) sets the DC input bias for the three amplifiers, and leaving the pin open disables the internal biasing. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | | 12 | 40 | mV | VIN = 1.25V | 2 |
| Input Offset Voltage (full operating temperature range) | VOS | | 15 | 50 | mV | VIN = 1.25V, ● full operating temperature range | 2 |
| Input Current | IIN | | 35 | 70 | µA | VIN = 1.25V | 2 |
| Input Current (full operating temperature range) | IIN | | 45 | 100 | µA | VIN = 1.25V, ● full operating temperature range | 2 |
| Input Resistance | RIN | 90 | 200 | | kΩ | VIN = 0.75V to 1.75V, BCV (Pin 6) Open | 2 |
| Input Resistance (full operating temperature range) | RIN | 50 | 150 | | kΩ | VIN = 0.75V to 1.75V, BCV (Pin 6) Open, ● full operating temperature range | 2 |
| Gain Error | AV ERR | -2.5 | 0.5 | 2.5 | % | VIN = 0.75V to 1.75V | 3 |
| Gain Error (full operating temperature range) | AV ERR | -3 | 0.5 | 3 | % | VIN = 0.75V to 1.75V, ● full operating temperature range | 3 |
| Gain Match Between Channels | AV MATCH | -2.75 | 0.4 | 2.75 | % | VIN = 0.75V to 1.75V | 3 |
| Gain Match Between Channels (full operating temperature range) | AV MATCH | -3.25 | 0.4 | 3.25 | % | VIN = 0.75V to 1.75V, ● full operating temperature range | 3 |
| Input Voltage Bias | VIN(DC) | 1 | 1.25 | 1.5 | V | RBCV = 348Ω | 3 |
| Input Voltage Bias (full operating temperature range) | VIN(DC) | 0.8 | 1.1 | 1.7 | V | RBCV = 348Ω, ● full operating temperature range | 3 |
| Power Supply Rejection Ratio | PSRR | 42 | 50 | | dB | VS = 4V to 6V, VIN = 1.25V | 3 |
| Power Supply Rejection Ratio (full operating temperature range) | PSRR | 38 | 47 | | dB | VS = 4V to 6V, VIN = 1.25V, ● full operating temperature range | 3 |
| Output Voltage Swing Low | VOL | | 0.8 | 0.9 | V | | 3 |
| Output Voltage Swing Low (full operating temperature range) | VOL | | 0.9 | 1 | V | ● full operating temperature range | 3 |
| Output Voltage Swing High | VOH | 4.1 | 4.2 | | V | | 3 |
| Output Voltage Swing High (full operating temperature range) | VOH | 4 | 4.1 | | V | ● full operating temperature range | 3 |
| Supply Current per Amplifier | IS | | 22.5 | 25 | mA | VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15) | 3 |
| Supply Current per Amplifier (full operating temperature range) | IS | | 25 | 29 | mA | VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15), ● full operating temperature range | 3 |
| Total Supply Current (Disabled) | | | 10 | 450 | µA | VEN = Open, RL = ∞ | 3 |
| Total Supply Current (Disabled) (full operating temperature range) | | | 10 | 1000 | µA | VEN = Open, RL = ∞, ● full operating temperature range | 3 |
| Enable Pin Current | IEN | -250 | -125 | | µA | VEN = 0.4V | 3 |
| Enable Pin Current (full operating temperature range) | IEN | -300 | -150 | | µA | VEN = 0.4V, ● full operating temperature range | 3 |
| Short-Circuit Current | ISC | -70 | 100 | | mA | | 3 |
| Short-Circuit Current (full operating temperature range) | ISC | -40 | 90 | | mA | ● full operating temperature range | 3 |
| Slew Rate | SR | 1400 | 2200 | | V/µs | VOUT = 1.25V to 3.75V (Note 5) | 3 |
| Full Power Bandwidth | FPBW | 220 | 350 | | MHz | VOUT = 2VP-P (Note 6) | 3 |
| Input Current | | -10 | | 10 | mA | | 2 |
| Output Current | | -70 | | 70 | mA | Note 2 | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | Note 3 | 2 |
| Specified Temperature Range | | -40 | | 85 | °C | Note 4 | 2 |
| Junction Temperature (SSOP) | TJ | | | 150 | °C | SSOP package | 2 |
| Storage Temperature Range (SSOP) | | -65 | | 150 | °C | SSOP package | 2 |
| Lead Temperature (SSOP) | | | | 300 | °C | Soldering, 10 sec, SSOP package | 2 |
| Thermal Resistance Junction-to-Ambient (SSOP) | θJA | | 110 | | °C/W | SSOP package | 2 |
| Supply Range | | 3 | | 7.5 | V | | 1 |
## CAD (KiCad official)
- Symbol: `LT6557CGN#PBF`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `lt6557cgn-etched.step` / `lt6557cgn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6557cgn.step` / `lt6557cgn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6557fa.pdf) (12 pp, sha256 `0e0dbc6dd3c3f8bd`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6557cgn-datasheet.pdf)