main
Ray
Publish 0.1.0
378ec04
LT6553CGN#PBF
Analog Devices · Video Amplifiers · SSOP-16-150mil
LT6553CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | TTL-compatible enable control referenced to DGND; an internal 46kΩ pull-up turns the part off if the pin is unconnected, and pulling it low enables the part. |
| 2 | DGND | power_in | Digital ground reference for the EN pin, normally connected to ground. |
| 3 | INR | input | Red channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 4 | AGND | power_in | Analog ground for the 370Ω gain resistor of the red channel amplifier. |
| 5 | ING | input | Green channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 6 | AGND | power_in | Analog ground shared by the 370Ω gain resistors of the green and blue channel amplifiers; additional resistance at this pin increases green-to-blue crosstalk. |
| 7 | INB | input | Blue channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 8 | V- | power_in | Negative supply voltage; the V- pins are not internally connected and must all be connected externally with proper bypassing. |
| 9 | V- | power_in | Negative supply voltage for the blue channel output stage; the V- pins are not internally connected and must all be connected externally with proper bypassing. |
| 10 | OUTB | output | Blue channel output, twice the blue channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 11 | V+ | power_in | Positive supply voltage for the output stages of amplifiers B and G; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
| 12 | OUTG | output | Green channel output, twice the green channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 13 | V- | power_in | Negative supply voltage for the output stages of amplifiers G and R; all V- pins must be connected externally with proper bypassing. |
| 14 | OUTR | output | Red channel output, twice the red channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 15 | V+ | power_in | Positive supply voltage for the output stage R; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
| 16 | V+ | power_in | Positive supply voltage; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Referred Offset Voltage | VOS | -10 | 3 | 10 | mV | VIN = 0V, VOS = VOUT/2 | 2 |
| Input Referred Offset Voltage (over temperature) | VOS | -20 | 20 | mV | ● full operating temperature range | 2 | |
| Input Current | IIN | -50 | -17 | 50 | µA | ● full operating temperature range | 2 |
| Input Resistance | RIN | 150 | 400 | kΩ | VIN = ±1V; ● full operating temperature range | 2 | |
| Power Supply Rejection Ratio | PSRR | 56 | 62 | dB | VS (Total) = 4.5V to 12V (Note 6); ● full operating temperature range | 2 | |
| Input Current Power Supply Rejection | IPSRR | -4 | 1 | 4 | µA/V | VS (Total) = 4.5V to 12V (Note 6); ● full operating temperature range | 2 |
| Gain Error | AV ERR | -5 | -1.2 | 5 | % | VOUT = ±2V; ● full operating temperature range | 2 |
| Gain Matching | AV MATCH | -1 | 1 | % | Any One Channel to Another | 2 | |
| Maximum Output Voltage Swing | VOUT | -3.25 | 3.5 | 3.25 | V | 2 | |
| Maximum Output Voltage Swing (over temperature) | VOUT | -3.1 | 3.1 | V | ● full operating temperature range | 2 | |
| Supply Current, Per Amplifier | IS | 8 | 11 | mA | 2 | ||
| Supply Current, Per Amplifier (over temperature) | IS | 14 | mA | ● full operating temperature range | 2 | ||
| Supply Current, Disabled, Total | 22 | 100 | µA | VEN = 4V; ● full operating temperature range | 2 | ||
| Supply Current, Disabled, Total | 0.5 | 100 | µA | VEN = Open; ● full operating temperature range | 2 | ||
| Enable Pin Current | IEN | -200 | -95 | µA | VEN = 0.4V; ● full operating temperature range | 2 | |
| Enable Pin Current | IEN | 0.5 | 50 | µA | VEN = V+; ● full operating temperature range | 2 | |
| Output Short-Circuit Current | ISC | -105 | 50 | 105 | mA | RL = 0Ω, VIN = ±1V; ● full operating temperature range | 2 |
| Slew Rate | SR | 1700 | 2500 | V/µs | ±1V on ±2V Output Step (Note 9) | 2 | |
| Full Power Bandwidth 2V | FPBW | 270 | 400 | MHz | VOUT = 2VP-P (Note 7) | 3 | |
| Total Supply Voltage (V+ to V-) | V+, V- | 4.5 | 12 | V | Wide supply range ±2.25V (4.5V) to ±6V (12V) | 1 | |
| Enable Supply Headroom | V+, VDGND | 3 | V | Required constraint on DGND and EN pins | 8 | ||
| Enable Pin Voltage | VEN, VDGND | 5.5 | V | Required constraint on DGND and EN pins | 8 | ||
| Specified Performance Temperature Range (LT6553C) | 0 | 70 | °C | Guaranteed specified performance, LT6553C (Note 5) | 3 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Total Supply Voltage (V+ to V-) | V+, V- | 13.2 | V | Note 1 | 2 | ||
| Input Current | -10 | 10 | mA | Note 2 | 2 | ||
| Output Current (Continuous) | -70 | 70 | mA | Continuous | 2 | ||
| EN to DGND Voltage | 5.5 | V | Note 2 | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, Junction to Ambient | θJA | 135 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT6553CGN#PBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
lt6553cgn-etched.step/lt6553cgn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6553cgn.step/lt6553cgn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
673fd420e4d2fec9, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6553CGN#PBF
**Analog Devices** · Video Amplifiers · SSOP-16-150mil
LT6553CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | TTL-compatible enable control referenced to DGND; an internal 46kΩ pull-up turns the part off if the pin is unconnected, and pulling it low enables the part. |
| 2 | DGND | power_in | Digital ground reference for the EN pin, normally connected to ground. |
| 3 | INR | input | Red channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 4 | AGND | power_in | Analog ground for the 370Ω gain resistor of the red channel amplifier. |
| 5 | ING | input | Green channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 6 | AGND | power_in | Analog ground shared by the 370Ω gain resistors of the green and blue channel amplifiers; additional resistance at this pin increases green-to-blue crosstalk. |
| 7 | INB | input | Blue channel input with a nominal impedance of 400kΩ and no internal termination resistor. |
| 8 | V- | power_in | Negative supply voltage; the V- pins are not internally connected and must all be connected externally with proper bypassing. |
| 9 | V- | power_in | Negative supply voltage for the blue channel output stage; the V- pins are not internally connected and must all be connected externally with proper bypassing. |
| 10 | OUTB | output | Blue channel output, twice the blue channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 11 | V+ | power_in | Positive supply voltage for the output stages of amplifiers B and G; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
| 12 | OUTG | output | Green channel output, twice the green channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 13 | V- | power_in | Negative supply voltage for the output stages of amplifiers G and R; all V- pins must be connected externally with proper bypassing. |
| 14 | OUTR | output | Red channel output, twice the red channel input, performing optimally with a 150Ω load (double-terminated 75Ω cable). |
| 15 | V+ | power_in | Positive supply voltage for the output stage R; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
| 16 | V+ | power_in | Positive supply voltage; the V+ pins are not internally connected and must all be connected externally with proper bypassing. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Referred Offset Voltage | VOS | -10 | 3 | 10 | mV | VIN = 0V, VOS = VOUT/2 | 2 |
| Input Referred Offset Voltage (over temperature) | VOS | -20 | | 20 | mV | ● full operating temperature range | 2 |
| Input Current | IIN | -50 | -17 | 50 | µA | ● full operating temperature range | 2 |
| Input Resistance | RIN | 150 | 400 | | kΩ | VIN = ±1V; ● full operating temperature range | 2 |
| Power Supply Rejection Ratio | PSRR | 56 | 62 | | dB | VS (Total) = 4.5V to 12V (Note 6); ● full operating temperature range | 2 |
| Input Current Power Supply Rejection | IPSRR | -4 | 1 | 4 | µA/V | VS (Total) = 4.5V to 12V (Note 6); ● full operating temperature range | 2 |
| Gain Error | AV ERR | -5 | -1.2 | 5 | % | VOUT = ±2V; ● full operating temperature range | 2 |
| Gain Matching | AV MATCH | -1 | | 1 | % | Any One Channel to Another | 2 |
| Maximum Output Voltage Swing | VOUT | -3.25 | 3.5 | 3.25 | V | | 2 |
| Maximum Output Voltage Swing (over temperature) | VOUT | -3.1 | | 3.1 | V | ● full operating temperature range | 2 |
| Supply Current, Per Amplifier | IS | | 8 | 11 | mA | | 2 |
| Supply Current, Per Amplifier (over temperature) | IS | | | 14 | mA | ● full operating temperature range | 2 |
| Supply Current, Disabled, Total | | | 22 | 100 | µA | VEN = 4V; ● full operating temperature range | 2 |
| Supply Current, Disabled, Total | | | 0.5 | 100 | µA | VEN = Open; ● full operating temperature range | 2 |
| Enable Pin Current | IEN | -200 | -95 | | µA | VEN = 0.4V; ● full operating temperature range | 2 |
| Enable Pin Current | IEN | | 0.5 | 50 | µA | VEN = V+; ● full operating temperature range | 2 |
| Output Short-Circuit Current | ISC | -105 | 50 | 105 | mA | RL = 0Ω, VIN = ±1V; ● full operating temperature range | 2 |
| Slew Rate | SR | 1700 | 2500 | | V/µs | ±1V on ±2V Output Step (Note 9) | 2 |
| Full Power Bandwidth 2V | FPBW | 270 | 400 | | MHz | VOUT = 2VP-P (Note 7) | 3 |
| Total Supply Voltage (V+ to V-) | V+, V- | 4.5 | | 12 | V | Wide supply range ±2.25V (4.5V) to ±6V (12V) | 1 |
| Enable Supply Headroom | V+, VDGND | 3 | | | V | Required constraint on DGND and EN pins | 8 |
| Enable Pin Voltage | VEN, VDGND | | | 5.5 | V | Required constraint on DGND and EN pins | 8 |
| Specified Performance Temperature Range (LT6553C) | | 0 | | 70 | °C | Guaranteed specified performance, LT6553C (Note 5) | 3 |
| Operating Temperature Range | | -40 | | 85 | °C | Note 4 | 2 |
| Total Supply Voltage (V+ to V-) | V+, V- | | | 13.2 | V | Note 1 | 2 |
| Input Current | | -10 | | 10 | mA | Note 2 | 2 |
| Output Current (Continuous) | | -70 | | 70 | mA | Continuous | 2 |
| EN to DGND Voltage | | | | 5.5 | V | Note 2 | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 300 | °C | Soldering, 10 sec | 2 |
| Thermal Resistance, Junction to Ambient | θJA | | 135 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LT6553CGN#PBF`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `lt6553cgn-etched.step` / `lt6553cgn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6553cgn.step` / `lt6553cgn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6553f.pdf) (12 pp, sha256 `673fd420e4d2fec9`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6553cgn-datasheet.pdf)