component
LT6370IMS8#PBF
Public Made by Adomby adom
Analog Devices Instrumentation OpAmps, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6370IMS8#PBF
Analog Devices · Instrumentation OpAmps · MSOP-8
LT6370IMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -RG | passive | For use with an external gain setting resistor; input current is limited to ±2mA and the voltage must stay between (V- - 0.3V) and (V+ + 0.3V). |
| 2 | -IN | input | Negative input terminal, high impedance; input current is limited to ±10mA and the voltage must stay between (V- - 0.3V) and (V+ + 0.3V). |
| 3 | +IN | input | Positive input terminal, high impedance; input current is limited to ±10mA and the voltage must stay between (V- - 0.3V) and (V+ + 0.3V). |
| 4 | V- | power_in | Negative power supply; a bypass capacitor should be used between the supply pins and ground, with total supply voltage (V+ to V-) rated at 36V maximum. |
| 5 | REF | input | Reference for the output voltage; input current is limited to -10mA and the voltage must stay between (V- - 0.3V) and (V+ + 0.3V). |
| 6 | OUTPUT | output | Output voltage referenced to the REF pin; output current is rated at 80mA maximum and short-circuit duration is thermally limited. |
| 7 | V+ | power_in | Positive power supply; a bypass capacitor should be used between the supply pins and ground, with total supply voltage (V+ to V-) rated at 36V maximum. |
| 8 | +RG | passive | For use with an external gain setting resistor; input current is limited to ±2mA and the voltage must stay between (V- - 0.3V) and (V+ + 0.3V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain Range | G | 1 | 1000 | V/V | G = (1 + 24.2k/RG) (Note 2) | 3 | |
| Supply Voltage Guaranteed by PSRR | VS | 4.75 | 35 | V | Guaranteed by PSRR | 5 | |
| Supply Current, VS = ±15V, TA = -40°C to 85°C | IS | 2.9 | mA | VS = ±15V, TA = -40°C to 85°C | 5 | ||
| Supply Current, VS = ±2.375V, TA = -40°C to 85°C | IS | 2.75 | mA | VS = ±2.375V, TA = -40°C to 85°C | 5 | ||
| Gain vs Temperature, G = 1 | 0.2 | 20 | ppm/°C | G = 1 (Note 5) | 3 | ||
| Gain vs Temperature, G > 1 | 0.5 | 50 | ppm/°C | G > 1 (Note 6) | 3 | ||
| Input Noise Voltage 0.1Hz to 10Hz, G = 1 | 2 | μVP-P | 0.1Hz to 10Hz, G = 1 | 4 | |||
| Input Noise Voltage 0.1Hz to 10Hz, G = 1000 | 0.2 | μVP-P | 0.1Hz to 10Hz, G = 1000 | 4 | |||
| Input Noise Voltage Density | eni | 7 | nV/√Hz | f = 1kHz | 4 | ||
| Output Noise Voltage Density | eno | 65 | nV/√Hz | f = 1kHz | 4 | ||
| Input Noise Current | 10 | pAP-P | 0.1Hz to 10Hz | 4 | |||
| Input Noise Current Density | in | 200 | fA/√Hz | f = 1kHz | 4 | ||
| Input Resistance | RIN | 225 | GΩ | VIN = -12.6V to 13V | 4 | ||
| Differential Input Capacitance | CIN | 0.9 | pF | Differential, f = 100kHz | 4 | ||
| Common Mode Input Capacitance | CIN | 15.9 | pF | Common Mode, f = 100kHz | 4 | ||
| REF Input Resistance | RREFIN | 20 | kΩ | 5 | |||
| -3dB Bandwidth, G = 1 | BW | 3100 | kHz | G = 1 | 5 | ||
| -3dB Bandwidth, G = 10 | BW | 1150 | kHz | G = 10 | 5 | ||
| -3dB Bandwidth, G = 100 | BW | 184 | kHz | G = 100 | 5 | ||
| -3dB Bandwidth, G = 1000 | BW | 19 | kHz | G = 1000 | 5 | ||
| Settling Time, G = 1 | tS | 5.8 | μs | 20V Output Step to 0.0015%, G = 1 | 5 | ||
| Settling Time, G = 10 | tS | 9.8 | μs | 20V Output Step to 0.0015%, G = 10 | 5 | ||
| Settling Time, G = 100 | tS | 16 | μs | 20V Output Step to 0.0015%, G = 100 | 5 | ||
| Settling Time, G = 1000 | tS | 100 | μs | 20V Output Step to 0.0015%, G = 1000 | 5 | ||
| REF Gain to Output | AVREF | 1 | V/V | VREF = ±10V | 5 | ||
| Total Supply Voltage (V+ to V-) | V+ - V- | 36 | V | 2 | |||
| Differential Input Voltage (+IN to -IN) | -36 | 36 | V | 2 | |||
| Input Current (+RG, -RG) | -2 | 2 | mA | 2 | |||
| Input Current (+IN, -IN) | -10 | 10 | mA | 2 | |||
| Input Current (REF) | -10 | mA | 2 | ||||
| Operating and Specified Temperature Range, I-Grade | -40 | 85 | °C | I-grade | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient, MS8 Package | θJA | 163 | °C/W | MS8 package | 2 | ||
| Thermal Resistance Junction-to-Case, MS8 Package | θJC | 40 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT6370IMS8#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6370ims8-pbf-etched.step/lt6370ims8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6370ims8-pbf.step/lt6370ims8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
2178fbfb81bf59fe, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).