component
LT6236IS6#TRPBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6236IS6#TRPBF
Analog Devices · Operational Amplifier · TSOT-23-6
LT6236IS6#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, within 50mV of either supply rail at no load, and short-circuit current of ±30mA typical at VS = 5V. |
| 2 | V- | power_in | Negative supply; total supply voltage V+ to V- is 3V minimum and 12.6V maximum. |
| 3 | +IN | input | Non-inverting input; input voltage range is 1.5V to 4V at VS = 5V, 0V, and input current is limited to ±40mA. |
| 4 | -IN | input | Inverting input; input bias current is 5µA typical and input current is limited to ±40mA. |
| 5 | ENABLE | input | Shutdown control; the amplifier is disabled with ENABLE = V+ - 0.35V (supply current 10µA max) and enabled with ENABLE = 0V, with pin current of -25µA typical at 0.3V. |
| 6 | V+ | power_in | Positive supply; total supply voltage V+ to V- is 3V minimum and 12.6V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Operational Amplifier/Comparator |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (LT6236) | VOS | 100 | 500 | µV | LT6236, TA = 25°C, VS = 5V, 0V | 3 | |
| Input Bias Current | IB | 5 | 10 | µA | TA = 25°C | 3 | |
| Input Offset Current | IOS | 0.1 | 0.6 | µA | TA = 25°C | 3 | |
| Input Noise Voltage Density | en | 1.1 | 1.7 | nV/√Hz | f = 10kHz, VS = 5V | 3 | |
| Large-Signal Gain | AVOL | 105 | 200 | V/mV | VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 21 | 40 | V/mV | VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 5.4 | 9 | V/mV | VS = 5V, VO = 1V to 4V, RL = 100Ω to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 90 | 175 | V/mV | VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 16.5 | 32 | V/mV | VS = 3.3V, VO = 0.65V to 2.65V, RL = 1k to VS/2 | 3 | |
| Input Voltage Range | VCM | 1.5 | 4 | V | Guaranteed by CMRR, VS = 5V, 0V | 3 | |
| Input Voltage Range | VCM | 1.15 | 2.65 | V | Guaranteed by CMRR, VS = 3.3V, 0V | 3 | |
| Common Mode Rejection Ratio | CMRR | 90 | 115 | dB | VS = 5V, VCM = 1.5V to 4V | 3 | |
| Power Supply Rejection Ratio | PSRR | 90 | 115 | dB | VS = 3V to 10V | 3 | |
| Minimum Supply Voltage | 3 | V | Note 7 | 3 | |||
| Output Voltage Swing Low | VOL | 4 | 40 | mV | No Load | 3 | |
| Output Voltage Swing Low | VOL | 85 | 190 | mV | ISINK = 5mA | 3 | |
| Output Voltage Swing Low | VOL | 240 | 460 | mV | VS = 5V, ISINK = 20mA | 3 | |
| Output Voltage Swing Low | VOL | 185 | 350 | mV | VS = 3.3V, ISINK = 15mA | 3 | |
| Output Voltage Swing High | VOH | 5 | 50 | mV | No Load | 3 | |
| Output Voltage Swing High | VOH | 90 | 200 | mV | ISOURCE = 5mA | 3 | |
| Output Voltage Swing High | VOH | 325 | 600 | mV | VS = 5V, ISOURCE = 20mA | 3 | |
| Output Voltage Swing High | VOH | 250 | 400 | mV | VS = 3.3V, ISOURCE = 15mA | 3 | |
| Short-Circuit Current | ISC | 30 | 45 | mA | VS = 5V | 3 | |
| Short-Circuit Current | ISC | 25 | 40 | mA | VS = 3.3V | 3 | |
| Supply Current per Amplifier | IS | 3.15 | 3.5 | mA | 3 | ||
| Disabled Supply Current per Amplifier | IS | 0.2 | 10 | µA | ENABLE = V+, 0.35V | 3 | |
| ENABLE Pin Current | IENABLE | -25 | -75 | µA | ENABLE = 0.3V | 3 | |
| ENABLE Pin Input Voltage Low | VL | 0.3 | V | 3 | |||
| Output Leakage Current | 0.2 | 10 | µA | ENABLE = V+, 0.35V, VO = 1.5V to 3.5V | 4 | ||
| Slew Rate | SR | 42 | 60 | V/µs | VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 4 | |
| Full-Power Bandwidth | FPBW | 4.4 | 6.3 | MHz | VS = 5V, VOUT = 3VP-P (Note 9) | 4 | |
| Input Offset Voltage (LT6236), I grade | VOS | 700 | µV | -40°C < TA < 85°C, LT6236 | 5 | ||
| Input Bias Current, I grade | IB | 12 | µA | -40°C < TA < 85°C | 5 | ||
| Input Offset Current, I grade | IOS | 0.8 | µA | -40°C < TA < 85°C | 5 | ||
| Large-Signal Gain, I grade | AVOL | 72 | V/mV | -40°C < TA < 85°C, VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 5 | ||
| Large-Signal Gain, I grade | AVOL | 16 | V/mV | -40°C < TA < 85°C, VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 5 | ||
| Large-Signal Gain, I grade | AVOL | 3.6 | V/mV | -40°C < TA < 85°C, VS = 5V, VO = 1V to 4V, RL = 100Ω to VS/2 | 5 | ||
| Large-Signal Gain, I grade | AVOL | 60 | V/mV | -40°C < TA < 85°C, VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 | 5 | ||
| Large-Signal Gain, I grade | AVOL | 12 | V/mV | -40°C < TA < 85°C, VS = 3.3V, VO = 0.65V to 2.65V, RL = 1k to VS/2 | 5 | ||
| Input Voltage Range, I grade | VCM | 1.5 | 4 | V | -40°C < TA < 85°C, Guaranteed by CMRR, VS = 5V, 0V | 5 | |
| Input Voltage Range, I grade | VCM | 1.15 | 2.65 | V | -40°C < TA < 85°C, Guaranteed by CMRR, VS = 3.3V, 0V | 5 | |
| Common Mode Rejection Ratio, I grade | CMRR | 90 | dB | -40°C < TA < 85°C, VS = 5V, VCM = 1.5V to 4V | 5 | ||
| Common Mode Rejection Ratio, I grade | CMRR | 85 | dB | -40°C < TA < 85°C, VS = 3.3V, VCM = 1.15V to 2.65V | 5 | ||
| Power Supply Rejection Ratio, I grade | PSRR | 85 | dB | -40°C < TA < 85°C, VS = 3V to 10V | 5 | ||
| Minimum Supply Voltage, I grade | 3 | V | -40°C < TA < 85°C, Note 7 | 5 | |||
| Output Voltage Swing Low, I grade | VOL | 60 | mV | -40°C < TA < 85°C, No Load | 5 | ||
| Output Voltage Swing Low, I grade | VOL | 210 | mV | -40°C < TA < 85°C, ISINK = 5mA | 5 | ||
| Output Voltage Swing Low, I grade | VOL | 510 | mV | -40°C < TA < 85°C, VS = 5V, ISINK = 15mA | 5 | ||
| Output Voltage Swing Low, I grade | VOL | 390 | mV | -40°C < TA < 85°C, VS = 3.3V, ISINK = 15mA | 5 | ||
| Input Current | -40 | 40 | mA | Note 2 | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Specified Temperature Range (I grade, LT6236IS6) | -40 | 85 | °C | Order information, LT6236IS6#TRPBF | 2 | ||
| Wide Supply Range (total supply) | 3 | 12.6 | V | Features, V+ to V- | 1 | ||
| Thermal Resistance, junction to ambient, TSOT-23 (S6) | θJA | 192 | °C/W | 6-Lead TSOT-23 (S6) | 2 |
CAD (KiCad official)
- Symbol:
LT6236IS6#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lt6236is6-trpbf-etched.step/lt6236is6-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6236is6-trpbf.step/lt6236is6-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
e5650a578572cdee, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).