# LT6236HS6#TRMPBF

**Analog Devices** · Operational Amplifier · TSOT-23-6

LT6236HS6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output with rail-to-rail swing, within 50mV of either supply rail at no load, and indefinite short-circuit duration. |
| 2 | V- | power_in | Negative supply, with total supply voltage V+ to V- limited to 12.6V maximum and 3V minimum. |
| 3 | +IN | input | Non-inverting amplifier input, with input current limited to ±40mA. |
| 4 | -IN | input | Inverting amplifier input, with input current limited to ±40mA. |
| 5 | ENABLE | input | Shutdown control that reduces supply current to 10µA maximum when ENABLE is at or above V+ - 0.35V, and enables the amplifier when low (specified with ENABLE = 0V). |
| 6 | V+ | power_in | Positive supply, with total supply voltage V+ to V- limited to 12.6V maximum and 3V minimum. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Operational Amplifier/Comparator |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (LT6236) | VOS |  |  | 750 | µV | LT6236, -40°C to 125°C, VS=±5V | 10 |
| Input Offset Voltage Drift (LT6236) | VOS TC |  | 0.7 | 2.2 | µV/°C | LT6236, -40°C to 125°C, VS=±5V | 10 |
| Input Bias Current | IB |  |  | 12 | µA | -40°C to 125°C, VS=±5V | 10 |
| Input Bias Current Match (Channel-to-Channel) | IB Match |  |  | 1.1 | µA | -40°C to 125°C, VS=±5V | 10 |
| Input Offset Current | IOS |  |  | 1.2 | µA | -40°C to 125°C, VS=±5V | 10 |
| Large-Signal Gain | AVOL | 76 |  |  | V/mV | VO=±4.5V, RL=10k, -40°C to 125°C | 10 |
| Large-Signal Gain | AVOL | 21 |  |  | V/mV | VO=±4.5V, RL=1k, -40°C to 125°C | 10 |
| Large-Signal Gain | AVOL | 4.1 |  |  | V/mV | VO=±1.5V, RL=100Ω, -40°C to 125°C | 10 |
| Input Voltage Range | VCM | -3 |  | 4 | V | Guaranteed by CMRR, -40°C to 125°C, VS=±5V | 10 |
| Common Mode Rejection Ratio | CMRR | 95 |  |  | dB | VCM=-3V to 4V, -40°C to 125°C | 10 |
| Power Supply Rejection Ratio | PSRR | 85 |  |  | dB | VS=±1.5V to ±5V, -40°C to 125°C | 10 |
| Output Voltage Swing Low | VOL |  |  | 70 | mV | No load, -40°C to 125°C, VS=±5V | 10 |
| Output Voltage Swing Low | VOL |  |  | 230 | mV | ISINK=5mA, -40°C to 125°C, VS=±5V | 10 |
| Output Voltage Swing Low | VOL |  |  | 550 | mV | ISINK=15mA, -40°C to 125°C, VS=±5V | 10 |
| Output Voltage Swing High | VOH |  |  | 78 | mV | No load, -40°C to 125°C, VS=±5V | 10 |
| Output Voltage Swing High | VOH |  |  | 240 | mV | ISOURCE=5mA, -40°C to 125°C, VS=±5V | 10 |
| Output Voltage Swing High | VOH |  |  | 710 | mV | ISOURCE=20mA, -40°C to 125°C, VS=±5V | 10 |
| Short-Circuit Current | ISC | -15 |  | 15 | mA | -40°C to 125°C, VS=±5V | 10 |
| Supply Current per Amplifier | IS |  |  | 5.5 | mA | -40°C to 125°C, VS=±5V | 10 |
| Disabled Supply Current per Amplifier | IS |  |  | 10 | µA | ENABLE=4.85V, -40°C to 125°C, VS=±5V | 10 |
| ENABLE Pin Current | IENABLE |  |  | -110 | µA | ENABLE=0.3V, -40°C to 125°C, VS=±5V | 10 |
| ENABLE Pin Input Voltage Low | VL |  |  | 0.3 | V | -40°C to 125°C, VS=±5V | 10 |
| ENABLE Pin Input Voltage High | VH | 4.85 |  |  | V | -40°C to 125°C, VS=±5V | 10 |
| Slew Rate | SR | 37 |  |  | V/µs | AV=-1, RL=1k, VO=-2V to 2V, -40°C to 125°C, VS=±5V | 10 |
| Full-Power Bandwidth | FPBW | 3.9 |  |  | MHz | VOUT=3VP-P, -40°C to 125°C, VS=±5V | 10 |
| Short-Circuit Current | ISC | -15 |  | 15 | mA | VS=5V, -40°C to 125°C | 7 |
| Supply Current per Amplifier | IS |  |  | 5 | mA | -40°C to 125°C, VS=5V, 0V | 7 |
| Disabled Supply Current per Amplifier | IS |  |  | 2 | µA | ENABLE=V+ - 0.15V, -40°C to 125°C | 7 |
| ENABLE Pin Current | IENABLE |  |  | -100 | µA | ENABLE=0.3V, -40°C to 125°C | 7 |
| ENABLE Pin Input Voltage Low | VL |  |  | 0.3 | V | -40°C to 125°C | 7 |
| Slew Rate | SR | 31 |  |  | V/µs | VS=5V, AV=-1, RL=1k, VO=1.5V to 3.5V, -40°C to 125°C | 7 |
| Full-Power Bandwidth | FPBW | 3.3 |  |  | MHz | VS=5V, VOUT=3VP-P, -40°C to 125°C | 7 |
| Input Current |  | -40 |  | 40 | mA | Note 2 | 2 |
| Operating Temperature Range |  | -40 |  | 125 | °C | Note 4 | 2 |
| Specified Temperature Range |  | -40 |  | 125 | °C | Note 5 | 2 |
| Maximum Junction Temperature | TJMAX |  |  | 150 | °C |  | 2 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 2 |
| Thermal Resistance, Junction-to-Ambient | θJA |  | 192 |  | °C/W | 6-Lead Plastic TSOT-23 (S6 package) | 2 |

## CAD (KiCad official)

- Symbol: `LT6236HS6#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lt6236hs6-trmpbf-etched.step` / `lt6236hs6-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6236hs6-trmpbf.step` / `lt6236hs6-trmpbf.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/623637fb.pdf) (26 pp, sha256 `e5650a578572cdee`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lt6236hs6-trmpbf-datasheet.pdf)