component
LT6230IS6-10#TRMPBF
Public Made by Adomby adom
Analog Devices Precision Op Amps, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 9d ago |
| viewers | 9d ago |
| lt6230is6-10-trmpbf-etched.glb | 9d ago |
| lt6230is6-10-trmpbf-etched.step | 9d ago |
| lt6230is6-10-trmpbf-hero.glb | 9d ago |
| lt6230is6-10-trmpbf-hero.overlay.json | 9d ago |
| lt6230is6-10-trmpbf.glb | 9d ago |
| lt6230is6-10-trmpbf.kicad_mod | 9d ago |
| lt6230is6-10-trmpbf.kicad_sym | 9d ago |
| lt6230is6-10-trmpbf.lbr | 9d ago |
| lt6230is6-10-trmpbf.step | 9d ago |
| package.json | 9d ago |
| page.json | 9d ago |
| README.md | 9d ago |
LT6230IS6-10#TRMPBF
Analog Devices · Precision Op Amps · TSOT-23-6
LT6230IS6-10#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings within 50mV of either supply rail (rail-to-rail output) and can source or sink up to 30mA. |
| 2 | V- | power_in | Negative supply rail; the total supply voltage from V+ to V- must not exceed 12.6V. |
| 3 | +IN | input | Non-inverting input; common-mode input range is guaranteed by CMRR from 1.5V to 4V at VS = 5V (0V to 5V supply) and from 1.15V to 2.65V at VS = 3.3V, and input current is limited to ±40mA. |
| 4 | -IN | input | Inverting input; input current is limited to ±40mA (Absolute Maximum Rating). |
| 5 | ENABLE | input | Enable pin: driving it below 0.3V enables the amplifier, while driving it to V+ - 0.35V or higher disables it and reduces supply current to 10µA maximum. |
| 6 | V+ | power_in | Positive supply rail; operating supply range is 3V minimum to 12.6V maximum (V+ to V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 700 | µV | l (-40°C < TA < 85°C); VS = 5V, 0V; LT6230IS6, LT6230IS6-10 | 6 | ||
| Input Offset Voltage Drift | VOS TC | 0.5 | 3 | µV/°C | l; VCM = Half Supply | 6 | |
| Input Bias Current | IB | 12 | µA | l; VS = 5V, 0V | 6 | ||
| Input Offset Current | IOS | 0.8 | µA | l; VS = 5V, 0V | 6 | ||
| Large-Signal Gain | AVOL | 72 | V/mV | l; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 6 | ||
| Large-Signal Gain | AVOL | 16 | V/mV | l; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 6 | ||
| Large-Signal Gain | AVOL | 60 | V/mV | l; VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 | 6 | ||
| Large-Signal Gain | AVOL | 12 | V/mV | l; VS = 3.3V, VO = 0.65V to 2.65V, RL = 1k to VS/2 | 6 | ||
| Input Voltage Range (5V) | VCM | 1.5 | 4 | V | l; Guaranteed by CMRR, VS = 5V, 0V | 6 | |
| Input Voltage Range (3.3V) | VCM | 1.15 | 2.65 | V | l; Guaranteed by CMRR, VS = 3.3V, 0V | 6 | |
| Common Mode Rejection Ratio (5V) | CMRR | 90 | dB | l; VS = 5V, VCM = 1.5V to 4V | 6 | ||
| Common Mode Rejection Ratio (3.3V) | CMRR | 85 | dB | l; VS = 3.3V, VCM = 1.15V to 2.65V | 6 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | l; VS = 3V to 10V | 6 | ||
| Minimum Supply Voltage | 3 | V | 6 | ||||
| Output Voltage Swing Low (No Load) | VOL | 60 | mV | l; No Load | 6 | ||
| Output Voltage Swing Low (ISINK = 5mA) | VOL | 210 | mV | l; ISINK = 5mA | 6 | ||
| Output Voltage Swing Low (5V) | VOL | 510 | mV | l; VS = 5V, ISINK = 15mA | 6 | ||
| Output Voltage Swing Low (3.3V) | VOL | 390 | mV | l; VS = 3.3V, ISINK = 15mA | 6 | ||
| Output Voltage Swing High (No Load) | VOH | 70 | mV | l; No Load | 6 | ||
| Output Voltage Swing High (ISOURCE = 5mA) | VOH | 220 | mV | l; ISOURCE = 5mA | 6 | ||
| Output Voltage Swing High (5V) | VOH | 675 | mV | l; VS = 5V, ISOURCE = 20mA | 6 | ||
| Output Voltage Swing High (3.3V) | VOH | 440 | mV | l; VS = 3.3V, ISOURCE = 15mA | 6 | ||
| Short-Circuit Current (5V) | ISC | -15 | 15 | mA | l; VS = 5V | 6 | |
| Short-Circuit Current (3.3V) | ISC | -15 | 15 | mA | l; VS = 3.3V | 6 | |
| Supply Current per Amplifier | IS | 4.4 | mA | l; per amplifier | 6 | ||
| Disabled Supply Current per Amplifier | 1 | µA | l; ENABLE = V+, 0.2V | 6 | |||
| ENABLE Pin Current | IENABLE | -100 | µA | l; ENABLE = 0.3V | 6 | ||
| ENABLE Pin Input Voltage Low | VL | 0.3 | V | l | 6 | ||
| Output Leakage Current | 1 | µA | l; ENABLE = V+, 0.2V, VO = 1.5V to 3.5V | 6 | |||
| Turn-On Time | tON | 300 | ns | l; ENABLE = 5V to 0V, RL = 1k, VS = 5V | 6 | ||
| Turn-Off Time | tOFF | 72 | µs | l; ENABLE = 0V to 5V, RL = 1k, VS = 5V | 6 | ||
| Slew Rate (AV = -1) | SR | 31 | V/µs | l; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 6 | ||
| Slew Rate (AV = -10) | SR | 185 | V/µs | l; LT6230-10, AV = -10, RL = 1k, VO = 1.5V to 3.5V | 6 | ||
| Full-Power Bandwidth | FPBW | 3.3 | MHz | l; VOUT = 3VP-P; LT6230I | 6 | ||
| Large-Signal Gain | AVOL | 93 | V/mV | l; VO = ±4.5V, RL = 10k | 9 | ||
| Large-Signal Gain | AVOL | 25 | V/mV | l; VO = ±4.5V, RL = 1k | 9 | ||
| Input Voltage Range | VCM | -3 | 4 | V | l; Guaranteed by CMRR | 9 | |
| Common Mode Rejection Ratio | CMRR | 95 | dB | l; VCM = -3V to 4V | 9 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | l; VS = ±1.5V to ±5V | 9 | ||
| Output Voltage Swing Low (No Load) | VOL | 60 | mV | l; No Load | 9 | ||
| Output Voltage Swing Low (ISINK = 5mA) | VOL | 210 | mV | l; ISINK = 5mA | 9 | ||
| Output Voltage Swing Low (ISINK = 15mA) | VOL | 510 | mV | l; ISINK = 15mA | 9 | ||
| Output Voltage Swing High (No Load) | VOH | 70 | mV | l; No Load | 9 | ||
| Output Voltage Swing High (ISOURCE = 5mA) | VOH | 220 | mV | l; ISOURCE = 5mA | 9 | ||
| Output Voltage Swing High (ISOURCE = 20mA) | VOH | 675 | mV | l; ISOURCE = 20mA | 9 | ||
| Supply Current per Amplifier | IS | 4.85 | mA | l; VS = ±5V | 9 | ||
| ENABLE Pin Current | IENABLE | -110 | µA | l; ENABLE = 0.3V | 9 | ||
| ENABLE Pin Input Voltage High | VH | 4.8 | V | l | 9 | ||
| Slew Rate (AV = -1) | SR | 37 | V/µs | l; AV = -1, RL = 1k, VO = -2V to 2V | 9 | ||
| Slew Rate (AV = -10) | SR | 260 | V/µs | l; LT6230-10, AV = -10, RL = 1k, VO = -2V to 2V | 9 | ||
| Full-Power Bandwidth | FPBW | 3.9 | MHz | l; VOUT = 3VP-P; LT6230I | 9 | ||
| Input Current | -40 | 40 | mA | Note 2 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Note 5 | 2 | ||
| Junction Temperature | 150 | °C | S6 package | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 250 | °C/W | S6 (6-lead TSOT-23) package | 2 |
CAD (KiCad official)
- Symbol:
LT6230IS6-10#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lt6230is6-10-trmpbf-etched.step/lt6230is6-10-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6230is6-10-trmpbf.step/lt6230is6-10-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
62978a516663990d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).