component
LT6230CS6#TRPBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6230CS6#TRPBF
Analog Devices · Operational Amplifier · TSOT-23-6L
LT6230CS6#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail, swinging within 50mV of either supply rail, with indefinite short-circuit duration allowed. |
| 2 | V- | power_in | Negative supply; the total supply V+ to V- must stay between 3V (minimum) and 12.6V (absolute maximum). |
| 3 | +IN | input | Non-inverting input; common-mode range is 1.5V to 4V at VS = 5V and 1.15V to 2.65V at VS = 3.3V (guaranteed by CMRR), and input current is limited to ±40mA absolute maximum. |
| 4 | -IN | input | Inverting input with the same limits as +IN, and input current limited to ±40mA absolute maximum. |
| 5 | ENABLE | input | Shutdown pin: at V+ - 0.35V or higher the amplifier is disabled (10µA max supply current), and an input below 0.3V enables it. |
| 6 | V+ | power_in | Positive supply; the total supply V+ to V- must stay between 3V (minimum) and 12.6V (absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 600 | µV | 0°C < TA < 70°C; LT6230CS6, LT6230CS6-10 | 5 | ||
| Input Offset Voltage Drift | VOS TC | 0.5 | 3 | µV/°C | 0°C < TA < 70°C; VCM = Half Supply | 5 | |
| Input Bias Current | IB | 11 | µA | 0°C < TA < 70°C | 5 | ||
| Input Offset Current | IOS | 0.7 | µA | 0°C < TA < 70°C | 5 | ||
| Large-Signal Gain | AVOL | 78 | V/mV | 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 17 | V/mV | 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 4.1 | V/mV | 0°C < TA < 70°C; VS = 5V, VO = 1V to 4V, RL = 100Ω to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 66 | V/mV | 0°C < TA < 70°C; VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 13 | V/mV | 0°C < TA < 70°C; VS = 3.3V, VO = 0.65V to 2.65V, RL = 1k to VS/2 | 5 | ||
| Input Voltage Range | VCM | 1.5 | 4 | V | 0°C < TA < 70°C; Guaranteed by CMRR, VS = 5V, 0V | 5 | |
| Input Voltage Range | VCM | 1.15 | 2.65 | V | 0°C < TA < 70°C; Guaranteed by CMRR, VS = 3.3V, 0V | 5 | |
| Common Mode Rejection Ratio | CMRR | 90 | dB | 0°C < TA < 70°C; VS = 5V, VCM = 1.5V to 4V | 5 | ||
| Common Mode Rejection Ratio | CMRR | 85 | dB | 0°C < TA < 70°C; VS = 3.3V, VCM = 1.15V to 2.65V | 5 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | 0°C < TA < 70°C; VS = 3V to 10V | 5 | ||
| Minimum Supply Voltage | 3 | V | 0°C < TA < 70°C; Note 7 | 5 | |||
| Output Voltage Swing Low | VOL | 50 | mV | 0°C < TA < 70°C; No Load | 5 | ||
| Output Voltage Swing Low | VOL | 200 | mV | 0°C < TA < 70°C; ISINK = 5mA | 5 | ||
| Output Voltage Swing Low | VOL | 500 | mV | 0°C < TA < 70°C; VS = 5V, ISINK = 20mA | 5 | ||
| Output Voltage Swing Low | VOL | 380 | mV | 0°C < TA < 70°C; VS = 3.3V, ISINK = 15mA | 5 | ||
| Output Voltage Swing High | VOH | 60 | mV | 0°C < TA < 70°C; No Load | 5 | ||
| Output Voltage Swing High | VOH | 215 | mV | 0°C < TA < 70°C; ISOURCE = 5mA | 5 | ||
| Output Voltage Swing High | VOH | 650 | mV | 0°C < TA < 70°C; VS = 5V, ISOURCE = 20mA | 5 | ||
| Output Voltage Swing High | VOH | 430 | mV | 0°C < TA < 70°C; VS = 3.3V, ISOURCE = 15mA | 5 | ||
| Short-Circuit Current | ISC | -25 | 25 | mA | 0°C < TA < 70°C; VS = 5V (printed ±25) | 5 | |
| Short-Circuit Current | ISC | -20 | 20 | mA | 0°C < TA < 70°C; VS = 3.3V (printed ±20) | 5 | |
| Supply Current per Amplifier | IS | 4.2 | mA | 0°C < TA < 70°C | 5 | ||
| Disabled Supply Current per Amplifier | 1 | µA | 0°C < TA < 70°C; ENABLE = V+, 0.25V | 5 | |||
| ENABLE Pin Current | IENABLE | -85 | µA | 0°C < TA < 70°C; ENABLE = 0.3V | 5 | ||
| ENABLE Pin Input Voltage Low | VL | 0.3 | V | 0°C < TA < 70°C | 5 | ||
| Output Leakage Current | 1 | µA | 0°C < TA < 70°C; ENABLE = V+, 0.25V, VO = 1.5V to 3.5V | 5 | |||
| Turn-On Time | tON | 300 | ns | 0°C < TA < 70°C; ENABLE = 5V to 0V, RL = 1k, VS = 5V | 5 | ||
| Turn-Off Time | tOFF | 65 | µs | 0°C < TA < 70°C; ENABLE = 0V to 5V, RL = 1k, VS = 5V | 5 | ||
| Slew Rate | SR | 35 | V/µs | 0°C < TA < 70°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 5 | ||
| Full-Power Bandwidth | FPBW | 3.7 | MHz | 0°C < TA < 70°C; VS = 5V, VOUT = 3VP-P; LT6230C | 5 | ||
| Input Offset Voltage | VOS | 100 | 500 | µV | TA = 25°C; LT6230S6, LT6230S6-10 | 3 | |
| Input Bias Current | IB | 5 | 10 | µA | TA = 25°C | 3 | |
| Input Offset Current | IOS | 0.1 | 0.6 | µA | TA = 25°C | 3 | |
| Input Noise Voltage Density | en | 1.1 | 1.7 | nV/√Hz | TA = 25°C; f = 10kHz, VS = 5V | 3 | |
| Large-Signal Gain | AVOL | 105 | 200 | V/mV | TA = 25°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 21 | 40 | V/mV | TA = 25°C; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 3 | |
| Large-Signal Gain | AVOL | 5.4 | 9 | V/mV | TA = 25°C; VS = 5V, VO = 1V to 4V, RL = 100Ω to VS/2 | 3 | |
| Common Mode Rejection Ratio | CMRR | 90 | 115 | dB | TA = 25°C; VS = 5V, VCM = 1.5V to 4V | 3 | |
| Power Supply Rejection Ratio | PSRR | 90 | 115 | dB | TA = 25°C; VS = 3V to 10V | 4 | |
| Output Voltage Swing Low | VOL | 240 | 460 | mV | TA = 25°C; VS = 5V, ISINK = 20mA | 4 | |
| Output Voltage Swing High | VOH | 325 | 600 | mV | TA = 25°C; VS = 5V, ISOURCE = 20mA | 4 | |
| Short-Circuit Current | ISC | 30 | 45 | mA | TA = 25°C; VS = 5V (printed ±30 typ, ±45 max) | 4 | |
| Supply Current per Amplifier | IS | 3.15 | 3.5 | mA | TA = 25°C; VS = 5V, 0V | 4 | |
| Disabled Supply Current per Amplifier | 0.2 | 10 | µA | TA = 25°C; ENABLE = V+, 0.35V | 4 | ||
| Slew Rate | SR | 42 | 60 | V/µs | TA = 25°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 4 | |
| Full-Power Bandwidth | FPBW | 4.8 | 6.3 | MHz | TA = 25°C; VS = 5V, VOUT = 3VP-P | 4 | |
| Input Current | -40 | 40 | mA | Note 2; printed ±40mA | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Note 5 | 2 | ||
| Specified Temperature Range (C grade) | 0 | 70 | °C | LT6230CS6#TRPBF (C grade); Note 5 | 3 | ||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 250 | °C/W | S6 TSOT-23 package; TJMAX = 150°C | 2 | ||
| Wide Supply Range | 3 | 12.6 | V | Features list (no recommended operating table) | 1 |
CAD (KiCad official)
- Symbol:
LT6230CS6#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lt6230cs6-trpbf-etched.step/lt6230cs6-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6230cs6-trpbf.step/lt6230cs6-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
62978a516663990d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).