main
History Download
Ray Publish 0.1.0 fe36fb6

LT6222IGN#PBF

Analog Devices · Precision OpAmps · SSOP-16

LT6222IGN#PBF from Analog Devices, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings within 10mV of either supply rail.
2 -IN A input Inverting input of amplifier A; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
3 +IN A input Non-inverting input of amplifier A; the input range includes both supply rails and inputs can be driven beyond the supplies without damage.
4 VS+ power_in Positive supply; total supply voltage (VS- to VS+) must not exceed 12.6V, with operation from 2.2V to 12.6V.
5 +IN B input Non-inverting input of amplifier B; the input range includes both supply rails and inputs can be driven beyond the supplies without damage.
6 -IN B input Inverting input of amplifier B; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
7 OUT B output Output of amplifier B, which swings within 10mV of either supply rail.
8 NC unconnected No connection; the datasheet pin list shows this pin as NC.
9 NC unconnected No connection; the datasheet pin list shows this pin as NC.
10 OUT C output Output of amplifier C, which swings within 10mV of either supply rail.
11 -IN C input Inverting input of amplifier C; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
12 +IN C input Non-inverting input of amplifier C; the input range includes both supply rails and inputs can be driven beyond the supplies without damage.
13 VS- power_in Negative supply; the total supply voltage (VS- to VS+) must not exceed 12.6V.
14 +IN D input Non-inverting input of amplifier D; the input range includes both supply rails and inputs can be driven beyond the supplies without damage.
15 -IN D input Inverting input of amplifier D; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
16 OUT D output Output of amplifier D, which swings within 10mV of either supply rail.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16
Category Operational Amplifier/Comparator
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 125 700 µV VCM = 0V 5
Input Offset Voltage VOS 0.75 3.5 mV VCM = VS 5
Input Offset Voltage Shift ∆VOS 30 300 µV VS = 5V, VCM = 0V to 3.5V 5
Input Offset Voltage Shift ∆VOS 30 210 µV VS = 3V, VCM = 0V to 1.5V 5
Input Bias Current IB 25 200 nA VCM = 1V 5
Input Bias Current IB 300 900 nA VCM = VS, 0.2V 5
Input Offset Current IOS 20 150 nA VCM = 1V 5
Large Signal Voltage Gain AVOL 25 70 V/mV VS = 5V, VOUT = 0.5V to 4.5V, RL = 1k at VS/2 5
Large Signal Voltage Gain AVOL 2.5 8 V/mV VS = 5V, VOUT = 1.5V to 3.5V, RL = 100Ω at VS/2 5
Large Signal Voltage Gain AVOL 20 60 V/mV VS = 3V, VOUT = 0.5V to 2.5V, RL = 1k at VS/2 5
Common Mode Rejection Ratio CMRR 81 100 dB VS = 5V, VCM = 0V to 3.5V 5
Common Mode Rejection Ratio CMRR 77 100 dB VS = 3V, VCM = 0V to 1.5V 5
Input Common Mode Range 0 V 5
Power Supply Rejection Ratio PSRR 79 104 dB VS = 2.5V to 10V, VCM = 0V 5
Minimum Supply Voltage 2.2 2.5 V 5
Output Voltage Swing LOW VOL 10 60 mV No Load 5
Output Voltage Swing LOW VOL 120 240 mV ISINK = 5mA 5
Output Voltage Swing LOW VOL 220 450 mV ISINK = 10mA 5
Output Voltage Swing HIGH VOH 10 60 mV No Load 5
Output Voltage Swing HIGH VOH 160 325 mV ISOURCE = 5mA 5
Output Voltage Swing HIGH VOH 325 650 mV ISOURCE = 10mA 5
Short-Circuit Current ISC 12.5 30 mA VS = 5V 5
Short-Circuit Current ISC 12.5 25 mA VS = 3V 5
Supply Current Per Amplifier IS 1.1 1.5 mA 5
Gain-Bandwidth Product GBW 25 50 MHz VS = 5V, Frequency = 1MHz 5
Slew Rate SR 8 15 V/µs VS = 5V, AV = -1, RL = 1k, VOUT = 4V 5
Input Offset Voltage VOS 150 800 µV VCM = -5V 8
Input Offset Voltage VOS 0.75 3.5 mV VCM = 5V 8
Input Offset Voltage Shift ∆VOS 90 950 µV VCM = -5V to 3.5V 8
Input Bias Current IB 25 200 nA VCM = -4V 8
Input Bias Current IB 300 900 nA VCM = 4.8V 8
Input Offset Current IOS 20 150 nA VCM = -4V 8
Large Signal Voltage Gain AVOL 25 70 V/mV VOUT = -4V to 4V, RL = 1k 8
Large Signal Voltage Gain AVOL 2.5 8 V/mV VOUT = -1V to 1V, RL = 100Ω 8
Common Mode Rejection Ratio CMRR 79 100 dB VCM = -5V to 3.5V 8
Input Common Mode Range -5 5 V 8
Power Supply Rejection Ratio PSRR 79 104 dB VS+ = 2.5V to 10V, VS- = 0V, VCM = 0V 8
Output Voltage Swing LOW VOL 10 60 mV No Load 8
Output Voltage Swing LOW VOL 120 240 mV ISINK = 5mA 8
Output Voltage Swing LOW VOL 220 450 mV ISINK = 10mA 8
Output Voltage Swing HIGH VOH 10 60 mV No Load 8
Output Voltage Swing HIGH VOH 160 325 mV ISOURCE = 5mA 8
Output Voltage Swing HIGH VOH 325 650 mV ISOURCE = 10mA 8
Short-Circuit Current ISC 12.5 30 mA 8
Supply Current IS 1.4 2.25 mA 8
Input Current -10 10 mA 2
Operating Temperature Range TA -40 85 °C 2
Specified Temperature Range -40 85 °C 2
Maximum Junction Temperature 150 °C 2
Storage Temperature -65 150 °C 2
Lead Temperature (Soldering) 300 °C Soldering, 10 sec. 2
Wide Supply Range (Features) 2.2 12.6 V 1
Thermal Resistance Junction-to-Ambient θJA 135 °C/W GN16 (16-lead SSOP) package 2

CAD (KiCad official)

  • Symbol: LT6222IGN#PBF
  • Footprint: Package_SO:SSOP-16_5.3x6.2mm_P0.65mm
  • 3D model: SSOP-16 (KiCad packages3D, STEP)
  • 3D model files: lt6222ign-etched.step / lt6222ign-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6222ign.step / lt6222ign.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 a6b272d71b39533b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF