main
Ray Publish 0.1.0 1d64316 10d ago

LT6205IS5#TRPBF

Analog Devices · Pre-ordered Chips · TSOT-23-5

LT6205IS5#TRPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output swings within 60mV of either supply rail, and the output may be shorted indefinitely per the absolute maximum rating for output short-circuit duration.
2 V- power_in Negative supply pin; the part operates with a minimum supply of 2.7V and a total supply (V+ to V-) not exceeding 12.6V.
3 +IN input Non-inverting input whose common-mode range includes ground and can be driven beyond the supplies without damage or phase reversal of the output.
4 -IN input Inverting input protected by back-to-back diodes that limit the differential input voltage to ±1.4V; if the differential input exceeds 1.4V, the input current must be limited to less than 10mA.
5 V+ power_in Positive supply pin, which should be bypassed with a small capacitor (typically 0.01µF to 0.1µF) within 0.25 inches of the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Interface ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 1 5 mV VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Input Offset Voltage Match (Channel-to-Channel) 1 4 mV VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Input Offset Voltage Drift 7 15 μV/°C VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Input Bias Current IB 10 30 μA VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Input Offset Current IOS 0.6 3 μA VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Common Mode Rejection Ratio CMRR 78 90 dB VCM = 0V to V+, 2V 3
Input Voltage Range 0 V VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Power Supply Rejection Ratio PSRR 67 75 dB VS = 3V to 12V, VCM = VOUT = 0.5V 3
Minimum Supply Voltage 2.7 V VCM = 0.5V 3
Large-Signal Voltage Gain AVOL 30 100 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 1k 3
Large-Signal Voltage Gain AVOL 5 20 V/mV VS = 5V, VO = 1V to 3V, RL = 150Ω 3
Large-Signal Voltage Gain AVOL 20 60 V/mV VS = 3V, VO = 0.5V to 2.5V, RL = 1k 3
Output Voltage Swing Low VOL 10 25 mV No load, input overdrive = 30mV 3
Output Voltage Swing Low VOL 75 150 mV ISINK = 5mA 3
Output Voltage Swing Low VOL 300 500 mV VS = 5V, ISINK = 25mA 3
Output Voltage Swing Low VOL 200 350 mV VS = 3V, ISINK = 15mA 3
Output Voltage Swing High VOH 60 100 mV No load, input overdrive = 30mV 3
Output Voltage Swing High VOH 150 250 mV ISOURCE = 5mA 3
Output Voltage Swing High VOH 650 1200 mV VS = 5V, ISOURCE = 25mA 3
Output Voltage Swing High VOH 300 500 mV VS = 3V, ISOURCE = 15mA 3
Short-Circuit Current ISC 20 35 60 mA VS = 5V, output shorted to GND 3
Short-Circuit Current ISC 20 30 50 mA VS = 3V, output shorted to GND 3
Supply Current per Amplifier IS 3.75 5.75 mA VS = 3V, 0V; VS = 5V, 0V; VCM = VOUT = 1V 3
Gain Bandwidth Product GBW 65 100 MHz f = 2MHz 3
Input Offset Voltage VOS 1 6 mV VS = ±5V; VCM = VOUT = 0V 4
Input Offset Voltage Match (Channel-to-Channel) 1 4 mV VS = ±5V; VCM = VOUT = 0V 4
Input Offset Voltage Drift 10 18 μV/°C VS = ±5V; VCM = VOUT = 0V 4
Input Bias Current IB 18 30 μA VS = ±5V; VCM = VOUT = 0V 4
Input Offset Current IOS 0.6 3 μA VS = ±5V; VCM = VOUT = 0V 4
Common Mode Rejection Ratio CMRR 78 90 dB VCM = -5V to 3V 4
Input Voltage Range -5 3 V VS = ±5V; VCM = VOUT = 0V 4
Power Supply Rejection Ratio PSRR 67 75 dB VS = ±2V to ±6V 4
Large-Signal Voltage Gain AVOL 50 133 V/mV VO = -4V to 4V, RL = 1k 4
Large-Signal Voltage Gain AVOL 7.5 20 V/mV VO = -3V to 3V, RL = 150Ω 4
Output Voltage Swing 4.88 4.92 V No load, input overdrive = 30mV 4
Output Voltage Swing 4.75 4.85 V IOUT = ±5mA 4
Output Voltage Swing 3.8 4.35 V IOUT = ±25mA 4
Short-Circuit Current ISC 30 40 60 mA Short to ground; VS = ±5V 4
Supply Current per Amplifier IS 4 6.5 mA VS = ±5V; VCM = VOUT = 0V 4
Gain Bandwidth Product GBW 65 100 MHz f = 2MHz 4
Slew Rate SR 350 600 V/μs AV = -1, RL = 1k, VO = -4V to 4V, measured from -3V to 3V 4
Full Power Bandwidth FPBW 14 24 MHz VOUT = 8VP-P 4
Input Current -10 10 mA 2
Pin Current While Exceeding Supplies -25 25 mA Note 9 2
Operating Temperature Range (LT6205I) -40 85 °C LT6205I 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 10 sec soldering 2
Specified Temperature Range (LT6205I) -40 85 °C LT6205I 2
Supply Voltage Range 2.7 12.6 V Wide supply range 1
Thermal Resistance, Junction-to-Ambient θJA 250 °C/W S5 package (5-lead TSOT-23) 2

CAD (KiCad official)

  • Symbol: LT6205IS5#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lt6205is5-trpbf-etched.step / lt6205is5-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6205is5-trpbf.step / lt6205is5-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 dcdb68d1efcc0b7a, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF