main
Ray
Publish 0.1.0
69de097
LT6110ITS8#TRMPBF
Analog Devices · Power Management Specialized - PMIC · TSOT-23-8
LT6110ITS8#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected. |
| 2 | IOUT | output | Sinking current output that sinks a current equal to VSENSE/RIN, where VSENSE is the voltage across the sense resistor. |
| 3 | IMON | output | Sourcing current output that sources a current equal to 3 • VSENSE/RIN. |
| 4 | V- | power_in | Negative power supply, normally connected to ground. |
| 5 | -IN | input | Negative input to the internal sense amplifier; must be tied to the system load side of the sense resistor, either directly or through a resistor. |
| 6 | RS | passive | Internal sense resistor terminal; connect to the load to use it, or leave open when using an external sense resistor. |
| 7 | V+ | power_in | Positive power supply (2V to 50V), connected to the more positive side of the sense resistor, with a minimum 0.1µF capacitance required from V+ to V-. |
| 8 | +IN | input | Positive input to the internal sense amplifier, which drives +IN to the same potential as -IN; a resistor R+IN from V+ to +IN sets the IOUT and IMON output currents. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Range | V+ | 2 | 50 | V | full temperature range | 3 | |
| Input Offset Voltage | VOS | 100 | 300 | µV | TA = 25°C | 3 | |
| Input Offset Voltage | VOS | 400 | µV | 0°C ≤ TA ≤ 85°C (Note 5) | 3 | ||
| Input Offset Voltage | VOS | 550 | µV | -40°C ≤ TA ≤ 0°C (Note 5) | 3 | ||
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | 0.15 | 0.3 | mV/mA | I+IN = 10µA to 1mA | 3 | |
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | 0.5 | mV/mA | I+IN = 10µA to 1mA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | 1.5 | mV/mA | I+IN = 10µA to 1mA, full temperature range | 3 | ||
| Input Offset Voltage Change with IOUT Voltage | ΔVOS/ΔVIOUT | 0.005 | 0.02 | mV/V | VIOUT = 0.4V to 5V | 3 | |
| Input Offset Voltage Change with IMON Voltage | ΔVOS/ΔVIMON | 0.3 | 1 | mV/V | VIMON = 0V to 1V | 3 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | 1 | µV/°C | full temperature range | 3 | ||
| Input Bias Current (-IN) | IB | 35 | 70 | nA | V+ = 5V | 3 | |
| Input Bias Current (-IN) | IB | 100 | nA | V+ = 5V, full temperature range | 3 | ||
| Input Offset Current | IOS | 1 | nA | V+ = 5V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 96 | 110 | dB | V+ = 2.0V to 36V | 3 | |
| Power Supply Rejection Ratio | PSRR | 90 | 100 | dB | V+ = 36V to 50V | 3 | |
| IOUT Current Error | IOUT | 0.6 | 1.6 | % | I+IN = 10µA (Note 4) | 3 | |
| IOUT Current Error | IOUT | 2 | % | I+IN = 10µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| IOUT Current Error | IOUT | 2.5 | % | I+IN = 10µA, full temperature range | 3 | ||
| IOUT Current Error | IOUT | 0.5 | 1 | % | I+IN = 100µA (Note 4) | 3 | |
| IOUT Current Error | IOUT | 1.5 | % | I+IN = 100µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| IOUT Current Error | IOUT | 2.3 | % | I+IN = 100µA, full temperature range | 3 | ||
| IOUT Current Error | IOUT | 0.75 | 2.5 | % | I+IN = 1mA (Note 4) | 3 | |
| IOUT Current Error | IOUT | 3 | % | I+IN = 1mA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| IOUT Current Error | IOUT | 4 | % | I+IN = 1mA, full temperature range | 3 | ||
| IMON Current Error | IMON | 1.5 | 3 | % | I+IN = 10µA (Note 4) | 3 | |
| IMON Current Error | IMON | 3.5 | % | I+IN = 10µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| IMON Current Error | IMON | 5 | % | I+IN = 10µA, full temperature range | 3 | ||
| IMON Current Error | IMON | 1.7 | 4 | % | I+IN = 1mA (Note 4) | 3 | |
| IMON Current Error | IMON | 6 | % | I+IN = 1mA, full temperature range | 3 | ||
| IOUT Current Error Change with IOUT Voltage | ΔIIOUT/VIOUT | 0.2 | %/V | VIOUT = 0.4V to 3.5V (Note 4) | 3 | ||
| IOUT Current Error Change with IOUT Voltage | ΔIIOUT/VIOUT | 0.4 | %/V | VIOUT = 0.4V to 5V (Note 4) | 3 | ||
| IMON Current Error Change with IMON Voltage | ΔIIMON/VIMON | 0.2 | %/V | VIMON = 0V to 3.1V, VIOUT = 5V (Note 4) | 3 | ||
| +IN Current Range | 0.01 | 1 | mA | full temperature range | 3 | ||
| Supply Current | IS | 16 | 30 | µA | V+ = 5V, I+IN = 0µA | 3 | |
| Supply Current | IS | 50 | µA | V+ = 5V, I+IN = 0µA, full temperature range | 3 | ||
| Supply Current | IS | 30 | 50 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 | |
| Supply Current | IS | 100 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V, full temperature range | 3 | ||
| RSENSE Resistance | RSENSE | 0.0165 | 0.02 | 0.0225 | Ω | Note 2 | 3 |
| Signal Bandwidth (-3dB) | BW | 180 | kHz | I+IN = 100µA, RIOUT = 1k | 3 | ||
| Rise Time | tr | 2 | µs | 3 | |||
| +IN, -IN, IOUT, IMON Current | 10 | mA | 2 | ||||
| IOUT to IMON Voltage | -0.6 | 36 | V | 2 | |||
| V+, +IN to IOUT Voltage | 36 | V | 2 | ||||
| RSENSE Current, Continuous | 3 | A | Note 2 | 2 | |||
| RSENSE Current, Transient | 5 | A | <0.1 Second, Note 2 | 2 | |||
| Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | TS8 | 2 | |||
| Specified Temperature Range | -40 | 85 | °C | LT6110I | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 195 | °C/W | TS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT6110ITS8#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
lt6110its8-trmpbf-etched.step/lt6110its8-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6110its8-trmpbf.step/lt6110its8-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (38 pp, sha256
5bac8d73041462a0, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6110ITS8#TRMPBF
**Analog Devices** · Power Management Specialized - PMIC · TSOT-23-8
LT6110ITS8#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected. |
| 2 | IOUT | output | Sinking current output that sinks a current equal to VSENSE/RIN, where VSENSE is the voltage across the sense resistor. |
| 3 | IMON | output | Sourcing current output that sources a current equal to 3 • VSENSE/RIN. |
| 4 | V- | power_in | Negative power supply, normally connected to ground. |
| 5 | -IN | input | Negative input to the internal sense amplifier; must be tied to the system load side of the sense resistor, either directly or through a resistor. |
| 6 | RS | passive | Internal sense resistor terminal; connect to the load to use it, or leave open when using an external sense resistor. |
| 7 | V+ | power_in | Positive power supply (2V to 50V), connected to the more positive side of the sense resistor, with a minimum 0.1µF capacitance required from V+ to V-. |
| 8 | +IN | input | Positive input to the internal sense amplifier, which drives +IN to the same potential as -IN; a resistor R+IN from V+ to +IN sets the IOUT and IMON output currents. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Range | V+ | 2 | | 50 | V | full temperature range | 3 |
| Input Offset Voltage | VOS | | 100 | 300 | µV | TA = 25°C | 3 |
| Input Offset Voltage | VOS | | | 400 | µV | 0°C ≤ TA ≤ 85°C (Note 5) | 3 |
| Input Offset Voltage | VOS | | | 550 | µV | -40°C ≤ TA ≤ 0°C (Note 5) | 3 |
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | | 0.15 | 0.3 | mV/mA | I+IN = 10µA to 1mA | 3 |
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | | | 0.5 | mV/mA | I+IN = 10µA to 1mA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| Input Offset Voltage Change with I+IN | ΔVOS/ΔI+IN | | | 1.5 | mV/mA | I+IN = 10µA to 1mA, full temperature range | 3 |
| Input Offset Voltage Change with IOUT Voltage | ΔVOS/ΔVIOUT | | 0.005 | 0.02 | mV/V | VIOUT = 0.4V to 5V | 3 |
| Input Offset Voltage Change with IMON Voltage | ΔVOS/ΔVIMON | | 0.3 | 1 | mV/V | VIMON = 0V to 1V | 3 |
| Input Offset Voltage Drift | ΔVOS/ΔT | | 1 | | µV/°C | full temperature range | 3 |
| Input Bias Current (-IN) | IB | | 35 | 70 | nA | V+ = 5V | 3 |
| Input Bias Current (-IN) | IB | | | 100 | nA | V+ = 5V, full temperature range | 3 |
| Input Offset Current | IOS | | 1 | | nA | V+ = 5V | 3 |
| Power Supply Rejection Ratio | PSRR | 96 | 110 | | dB | V+ = 2.0V to 36V | 3 |
| Power Supply Rejection Ratio | PSRR | 90 | 100 | | dB | V+ = 36V to 50V | 3 |
| IOUT Current Error | IOUT | | 0.6 | 1.6 | % | I+IN = 10µA (Note 4) | 3 |
| IOUT Current Error | IOUT | | | 2 | % | I+IN = 10µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error | IOUT | | | 2.5 | % | I+IN = 10µA, full temperature range | 3 |
| IOUT Current Error | IOUT | | 0.5 | 1 | % | I+IN = 100µA (Note 4) | 3 |
| IOUT Current Error | IOUT | | | 1.5 | % | I+IN = 100µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error | IOUT | | | 2.3 | % | I+IN = 100µA, full temperature range | 3 |
| IOUT Current Error | IOUT | | 0.75 | 2.5 | % | I+IN = 1mA (Note 4) | 3 |
| IOUT Current Error | IOUT | | | 3 | % | I+IN = 1mA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error | IOUT | | | 4 | % | I+IN = 1mA, full temperature range | 3 |
| IMON Current Error | IMON | | 1.5 | 3 | % | I+IN = 10µA (Note 4) | 3 |
| IMON Current Error | IMON | | | 3.5 | % | I+IN = 10µA, 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IMON Current Error | IMON | | | 5 | % | I+IN = 10µA, full temperature range | 3 |
| IMON Current Error | IMON | | 1.7 | 4 | % | I+IN = 1mA (Note 4) | 3 |
| IMON Current Error | IMON | | | 6 | % | I+IN = 1mA, full temperature range | 3 |
| IOUT Current Error Change with IOUT Voltage | ΔIIOUT/VIOUT | | | 0.2 | %/V | VIOUT = 0.4V to 3.5V (Note 4) | 3 |
| IOUT Current Error Change with IOUT Voltage | ΔIIOUT/VIOUT | | | 0.4 | %/V | VIOUT = 0.4V to 5V (Note 4) | 3 |
| IMON Current Error Change with IMON Voltage | ΔIIMON/VIMON | | | 0.2 | %/V | VIMON = 0V to 3.1V, VIOUT = 5V (Note 4) | 3 |
| +IN Current Range | | 0.01 | | 1 | mA | full temperature range | 3 |
| Supply Current | IS | | 16 | 30 | µA | V+ = 5V, I+IN = 0µA | 3 |
| Supply Current | IS | | | 50 | µA | V+ = 5V, I+IN = 0µA, full temperature range | 3 |
| Supply Current | IS | | 30 | 50 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 |
| Supply Current | IS | | | 100 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V, full temperature range | 3 |
| RSENSE Resistance | RSENSE | 0.0165 | 0.02 | 0.0225 | Ω | Note 2 | 3 |
| Signal Bandwidth (-3dB) | BW | | 180 | | kHz | I+IN = 100µA, RIOUT = 1k | 3 |
| Rise Time | tr | | 2 | | µs | | 3 |
| +IN, -IN, IOUT, IMON Current | | | | 10 | mA | | 2 |
| IOUT to IMON Voltage | | -0.6 | | 36 | V | | 2 |
| V+, +IN to IOUT Voltage | | | | 36 | V | | 2 |
| RSENSE Current, Continuous | | | | 3 | A | Note 2 | 2 |
| RSENSE Current, Transient | | | | 5 | A | <0.1 Second, Note 2 | 2 |
| Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | TS8 | 2 |
| Specified Temperature Range | | -40 | | 85 | °C | LT6110I | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 195 | | °C/W | TS8 package | 2 |
## CAD (KiCad official)
- Symbol: `LT6110ITS8#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `lt6110its8-trmpbf-etched.step` / `lt6110its8-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6110its8-trmpbf.step` / `lt6110its8-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6110fa.pdf) (38 pp, sha256 `5bac8d73041462a0`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6110its8-trmpbf-datasheet.pdf)