LT6015IS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Rail-to-rail amplifier output that can drive loads up to 25mA and is unity-gain stable with capacitive loads up to 200pF.
2	V-	power_in	Negative supply (ground in single-supply use); total supply V+ to V- is 3V to 50V, and reverse supply is tolerated to -50V absolute maximum.
3	+IN	input	Non-inverting input with common mode range from V- to V- + 76V, protected against transients up to 25V below the negative supply.
4	-IN	input	Inverting input with common mode range from V- to V- + 76V, protected against transients up to 25V below the negative supply.
5	V+	power_in	Positive supply; total supply V+ to V- is 3V to 50V operating, with an absolute maximum of 60V.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSOT-23-5
Category	Operational Amplifier/Comparator
Pins	5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS	-80	45	80	µV	0 < VCM < V+, 1.75V, SOT-23, VS=5V, 25°C	3
Input Offset Voltage	VOS	-125	50	125	µV	VCM = 5V, VS=5V	3
Input Offset Voltage	VOS	-135	50	135	µV	VCM = 76V, VS=5V	3
Input Offset Voltage over temperature	VOS	-250	45	250	µV	0 < VCM < V+, 1.75V, over temperature	3
Input Offset Voltage over temperature	VOS	-350	50	350	µV	VCM = 5V to 76V, over temperature	3
Input Offset Voltage Drift	ΔVOS/ΔTEMP		0.75		µV/°C		3
Long Term Voltage Offset Stability	ΔVOS/ΔTIME		0.75		µV/Mo		3
Input Bias Current	IB	-5	2	5	nA	0.25V < VCM < V+, 1.75V	3
Input Bias Current	IB	-60	-16.5	0	nA	VCM = 0V	3
Input Bias Current	IB	11	14	17.5	µA	VCM = 5V to 76V	3
Input Bias Current over temperature	IB	-15	2	15	nA	0.25V < VCM < V+, 1.75V, over temperature	3
Input Bias Current over temperature	IB	-150	-16.5	0	nA	VCM = 0V, over temperature	3
Input Bias Current over temperature	IB	7	14	23	µA	VCM = 5V to 76V, over temperature	3
Input Bias Current, unpowered	IB		0.001	1	µA	VS = 0V, VCM = 0V to 76V	3
Input Offset Current	IOS	-5	2	5	nA	0.25V < VCM < V+, 1.75V	3
Input Offset Current	IOS	-500	50	500	nA	VCM = 5V to 76V (Note 6)	3
Input Offset Current over temperature	IOS	-15	2	15	nA	0.25V < VCM < V+, 1.75V, over temperature	3
Input Offset Current over temperature	IOS	-500	50	500	nA	VCM = 5V to 76V (Note 6), over temperature	3
Common Mode Input Range	VCMR	0		76	V	VS=5V, over temperature	3
Open Loop Gain	AVOL	300	3000		V/mV	RL = 10kΩ, ΔVOUT = 3V, VS=5V	3
Supply Rejection Ratio	PSRR	110	126		dB	VS = ±1.65V to ±15V, VCM = VOUT = Mid-Supply	3
Common Mode Rejection Ratio	CMRR	100	126		dB	VCM = 0V to 3.25V	3
Common Mode Rejection Ratio	CMRR	126	140		dB	VCM = 5V to 76V	3
Output Voltage Swing Low	VOL		3	55	mV	VS = 5V, No Load	3
Output Voltage Swing Low	VOL		280	500	mV	VS = 5V, ISINK = 5mA	3
Output Voltage Swing High	VOH		450	700	mV	VS = 5V, No Load	3
Output Voltage Swing High	VOH		1000	1250	mV	VS = 5V, ISOURCE = 5mA	3
Short-Circuit Current	ISC	10	25		mA	VS = 5V, 50Ω to V+	3
Input Bias Current	IB	-5	2	5	nA	VS = ±25V	4
Input Bias Current over temperature	IB	-15	2	15	nA	VS = ±25V, over temperature	4
Input Offset Current	IOS	-5	2	5	nA	VS = ±25V	4
Input Offset Current over temperature	IOS	-15	2	15	nA	VS = ±25V, over temperature	4
Common Mode Input Range	VCMR	-15		61	V	VS = ±25V, over temperature	4
Open Loop Gain	AVOL	200	1000		V/mV	RL = 10kΩ, ΔVOUT = 27V	4
Supply Rejection Ratio	PSRR	114	126		dB	VS = ±2.5V to ±25V, VCM = VOUT = 0V	4
Common Mode Rejection Ratio	CMRR	110	126		dB	VCM = -15V to 13.25V	4
Output Voltage Swing Low	VOL		3	55	mV	VS = ±15V, No Load	4
Output Voltage Swing Low	VOL		280	500	mV	VS = ±15V, ISINK = 5mA	4
Output Voltage Swing High	VOH		450	700	mV	VS = ±15V, No Load	4
Output Voltage Swing High	VOH		1000	1250	mV	VS = ±15V, ISOURCE = 5mA	4
Gain Bandwidth Product	GBW	2.85	3.2		MHz	fTEST = 100kHz, VS = ±15V	4
Gain Bandwidth Product over temperature	GBW	2.5	3.2		MHz	fTEST = 100kHz, over temperature	4
Slew Rate	SR	0.55	0.75		V/µs	ΔVOUT = 3V	4
Slew Rate over temperature	SR	0.45	0.75		V/µs	ΔVOUT = 3V, over temperature	4
Supply Voltage	VS	3		50	V	over temperature	4
Supply Voltage (3.3V min)	VS	3.3		50	V	over temperature	4
Reverse Supply Voltage	VS		-65	-50	V	Reverse Supply (Note 7), IS < -25µA/Amplifier	4
Supply Current Per Amplifier	IS		315	345	µA	SOT-23 Package	4
Settling Time Due to Input Step	tS		3.5		µs	ΔVOUT = ±2V, 0.1% Settling	4
Supply Voltage (V+ to V-)		-50		60	V	60V, -50V	2
Input Differential Voltage		-80		80	V		2
Input Voltage		-25		80	V	Note 2, relative to V-	2
Input Current		-10		10	mA	Note 2	2
Operating Temperature Range (I-grade)		-40		85	°C	LT6015I	2
Storage Temperature Range		-65		150	°C		2
Maximum Junction Temperature	TJMAX			150	°C		2
Lead Temperature (Soldering, 10sec)				300	°C		2
Thermal Resistance Junction-to-Ambient	θJA		250		°C/W	S5 package	2

CAD (KiCad official)

Symbol: LT6015IS5#TRMPBF
Footprint: Package_TO_SOT_SMD:TSOT-23-5
3D model: TSOT-23-5 (KiCad packages3D, STEP)
3D model files: lt6015is5-trmpbf-etched.step / lt6015is5-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6015is5-trmpbf.step / lt6015is5-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (22 pp, sha256 462f03430cc540c7, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT6015IS5#TRMPBF

Verified LT6015IS5#TRMPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README