Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6012IGN#PBF

Analog Devices · Precision OpAmps · SSOP-16-150mil

LT6012IGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, swings to within 40mV of either supply rail and is short-circuit protected indefinitely.
2 -IN A input Amplifier A inverting input, with differential input voltage limited to 10V and input current to ±10mA.
3 +IN A input Amplifier A non-inverting input, with input common mode range limited to V- + 1V to V+ - 1.2V.
4 V+ power_in Positive supply, operates from 2.7V to 36V total supply (V+ to V-) with a 40V absolute maximum.
5 +IN B input Amplifier B non-inverting input, with input common mode range limited to V- + 1V to V+ - 1.2V.
6 -IN B input Amplifier B inverting input, with differential input voltage limited to 10V and input current to ±10mA.
7 OUT B output Amplifier B output, swings to within 40mV of either supply rail and is short-circuit protected indefinitely.
8 NC unconnected No internal connection.
9 NC unconnected No internal connection.
10 OUT C output Amplifier C output, swings to within 40mV of either supply rail and is short-circuit protected indefinitely.
11 -IN C input Amplifier C inverting input, with differential input voltage limited to 10V and input current to ±10mA.
12 +IN C input Amplifier C non-inverting input, with input common mode range limited to V- + 1V to V+ - 1.2V.
13 V- power_in Negative supply or ground for single-supply operation, with total supply (V+ to V-) up to 40V maximum.
14 +IN D input Amplifier D non-inverting input, with input common mode range limited to V- + 1V to V+ - 1.2V.
15 -IN D input Amplifier D inverting input, with differential input voltage limited to 10V and input current to ±10mA.
16 OUT D output Amplifier D output, swings to within 40mV of either supply rail and is short-circuit protected indefinitely.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total Supply Voltage (V+ to V-) 40 V 2
Differential Input Voltage 10 V Note 2 2
Input Current -10 10 mA Note 2 2
Operating Temperature Range -40 85 °C Note 4 2
Specified Temperature Range -40 85 °C Note 5 2
Maximum Junction Temperature TJMAX 150 °C 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance, GN16 package (junction to ambient) θJA 135 °C/W GN16 package 2
Input Offset Voltage, VS = 5V, TA = 25°C VOS 30 125 µV 4
Input Offset Voltage, VS = 5V VOS 210 µV TA = -40°C to 85°C 4
Input Offset Voltage Drift, VS = 5V ∆VOS/∆T 0.2 1.2 µV/°C 4
Input Offset Current, VS = 5V, TA = 25°C IOS 150 900 pA 4
Input Offset Current, VS = 5V IOS 1500 pA TA = -40°C to 85°C 4
Input Bias Current, VS = 5V, TA = 25°C IB -900 150 900 pA 4
Input Bias Current, VS = 5V IB -1500 1500 pA TA = -40°C to 85°C 4
Input Voltage Range (Positive), VS = 5V VCM 3.8 4 V Guaranteed by CMRR 4
Input Voltage Range (Negative), VS = 5V VCM 0.7 1 V Guaranteed by CMRR 4
Common Mode Rejection Ratio, VS = 5V CMRR 107 135 dB VCM = 1V to 3.8V 4
Minimum Supply Voltage, VS = 5V 2.4 2.7 V Guaranteed by PSRR 4
Power Supply Rejection Ratio, VS = 5V PSRR 112 135 dB VS = 2.7V to 36V, VCM = 1/2VS 4
Large-Signal Voltage Gain, VS = 5V, RL = 10k AVOL 300 2000 V/mV RL = 10k, VOUT = 1V to 4V 4
Large-Signal Voltage Gain, VS = 5V, RL = 2k AVOL 250 2000 V/mV RL = 2k, VOUT = 1V to 4V 4
Maximum Output Swing (Positive, referred to V+), No Load, VS = 5V VOUT 35 65 mV No Load, 50mV Overdrive 5
Maximum Output Swing (Positive, referred to V+), ISOURCE, VS = 5V VOUT 120 220 mV ISOURCE = 1mA, 50mV Overdrive 5
Maximum Output Swing (Negative, referred to 0V), No Load, VS = 5V VOUT 40 65 mV No Load, 50mV Overdrive 5
Maximum Output Swing (Negative, referred to 0V), ISINK, VS = 5V VOUT 150 275 mV ISINK = 1mA, 50mV Overdrive 5
Output Short-Circuit Current (Source), VS = 5V ISC 4 14 mA VOUT = 0V, 1V Overdrive, Source 5
Output Short-Circuit Current (Sink), VS = 5V ISC 4 21 mA VOUT = 5V, -1V Overdrive, Sink 5
Slew Rate, VS = 5V SR 0.04 0.09 V/µs AV = -10, RF = 50k, RG = 5k; TA = -40°C to 85°C 5
Gain Bandwidth Product, VS = 5V GBW 225 330 kHz f = 10kHz; TA = -40°C to 85°C 5
Supply Current per Amplifier, VS = 5V, TA = 25°C IS 135 150 µA 5
Supply Current per Amplifier, VS = 5V IS 210 µA TA = -40°C to 85°C 5
Input Offset Voltage, VS = ±15V, TA = 25°C VOS 40 200 µV 6
Input Offset Voltage, VS = ±15V VOS 275 µV TA = -40°C to 85°C 6
Input Offset Voltage Drift, VS = ±15V ∆VOS/∆T 0.2 1.3 µV/°C 6
Input Offset Current, VS = ±15V, TA = 25°C IOS 150 900 pA 6
Input Offset Current, VS = ±15V IOS 1500 pA TA = -40°C to 85°C 6
Input Bias Current, VS = ±15V, TA = 25°C IB -900 150 900 pA 6
Input Bias Current, VS = ±15V IB -1500 1500 pA TA = -40°C to 85°C 6
Input Voltage Range, VS = ±15V VCM 13.5 14 V Guaranteed by CMRR 6
Common Mode Rejection Ratio, VS = ±15V (25°C row) CMRR 115 135 dB VCM = -13.5V to 13.5V 6
Common Mode Rejection Ratio, VS = ±15V (temperature row) CMRR 112 135 dB VCM = -13.5V to 13.5V 6
Minimum Supply Voltage, VS = ±15V 1.2 1.35 V Guaranteed by PSRR 6
Power Supply Rejection Ratio, VS = ±15V PSRR 112 135 dB VS = ±1.35V to ±18V 6
Large-Signal Voltage Gain, VS = ±15V, RL = 10k AVOL 600 2000 V/mV RL = 10k, VOUT = -13.5V to 13.5V 6
Large-Signal Voltage Gain, VS = ±15V, RL = 5k AVOL 300 1500 V/mV RL = 5k, VOUT = -13.5V to 13.5V 6
Maximum Output Swing (Positive, referred to V+), No Load, VS = ±15V VOUT 45 100 mV No Load, 50mV Overdrive 6
Maximum Output Swing (Positive, referred to V+), ISOURCE, VS = ±15V VOUT 140 240 mV ISOURCE = 1mA, 50mV Overdrive 6
Maximum Output Swing (Negative, referred to V-), No Load, VS = ±15V VOUT 45 100 mV No Load, 50mV Overdrive 6
Maximum Output Swing (Negative, referred to V-), ISINK, VS = ±15V VOUT 150 300 mV ISINK = 1mA, 50mV Overdrive 6
Output Short-Circuit Current (Source), VS = ±15V ISC 5 15 mA VOUT = 0V, 1V Overdrive (Source) 7
Output Short-Circuit Current (Sink), VS = ±15V ISC 5 20 mA VOUT = 0V, -1V Overdrive (Sink) 7
Slew Rate, VS = ±15V SR 0.05 0.11 V/µs AV = -10, RF = 50k, RG = 5k; TA = -40°C to 85°C 7
Gain Bandwidth Product, VS = ±15V GBW 250 350 kHz f = 10kHz; TA = -40°C to 85°C 7
Supply Current per Amplifier, VS = ±15V, TA = 25°C IS 260 330 µA 7
Supply Current per Amplifier, VS = ±15V IS 400 µA TA = -40°C to 85°C 7

CAD (KiCad official)

  • Symbol: LT6012IGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: lt6012ign-etched.step / lt6012ign-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6012ign.step / lt6012ign.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 7ffe2dfde236bb60, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF