3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6012AIGN#PBF
Analog Devices · Precision OpAmps · SSOP-16-150mil
LT6012AIGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output with rail-to-rail swing to within 40mV of either supply rail (no load) and indefinite short-circuit duration. |
| 2 | -IN A | input | Amplifier A inverting input, protected by back-to-back diodes and 500Ω series resistors; input current limited to ±10mA. |
| 3 | +IN A | input | Amplifier A non-inverting input, with common mode range from V- + 1V to V+ - 1.2V and input bias current of 300pA maximum for the A grade. |
| 4 | V+ | power_in | Positive supply, shared by all four amplifiers; total supply (V+ to V-) from 2.7V up to 36V with 40V absolute maximum. |
| 5 | +IN B | input | Amplifier B non-inverting input, with common mode range from V- + 1V to V+ - 1.2V. |
| 6 | -IN B | input | Amplifier B inverting input, protected by back-to-back diodes and 500Ω series resistors; input current limited to ±10mA. |
| 7 | OUT B | output | Amplifier B output with rail-to-rail swing to within 40mV of either supply rail (no load) and indefinite short-circuit duration. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | OUT C | output | Amplifier C output with rail-to-rail swing to within 40mV of either supply rail (no load) and indefinite short-circuit duration. |
| 11 | -IN C | input | Amplifier C inverting input, protected by back-to-back diodes and 500Ω series resistors; input current limited to ±10mA. |
| 12 | +IN C | input | Amplifier C non-inverting input, with common mode range from V- + 1V to V+ - 1.2V. |
| 13 | V- | power_in | Negative supply or ground, shared by all four amplifiers; total supply (V+ to V-) from 2.7V up to 36V with 40V absolute maximum. |
| 14 | +IN D | input | Amplifier D non-inverting input, with common mode range from V- + 1V to V+ - 1.2V. |
| 15 | -IN D | input | Amplifier D inverting input, protected by back-to-back diodes and 500Ω series resistors; input current limited to ±10mA. |
| 16 | OUT D | output | Amplifier D output with rail-to-rail swing to within 40mV of either supply rail (no load) and indefinite short-circuit duration. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (25°C) | VOS | 25 | 85 | µV | TA = 25°C; VS = 5V, 0V; VCM = 2.5V | 4 | |
| Input Offset Voltage (0°C to 70°C) | VOS | 135 | µV | TA = 0°C to 70°C | 4 | ||
| Input Offset Voltage (-40°C to 85°C) | VOS | 170 | µV | TA = -40°C to 85°C | 4 | ||
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 1.2 | µV/°C | 4 | ||
| Input Offset Current (25°C) | IOS | 20 | 300 | pA | TA = 25°C; VS = 5V, 0V | 4 | |
| Input Offset Current (0°C to 70°C) | IOS | 450 | pA | TA = 0°C to 70°C | 4 | ||
| Input Offset Current (-40°C to 85°C) | IOS | 600 | pA | TA = -40°C to 85°C | 4 | ||
| Input Bias Current (25°C) | IB | -300 | 20 | 300 | pA | TA = 25°C; VS = 5V, 0V | 4 |
| Input Bias Current (0°C to 70°C) | IB | -450 | 450 | pA | TA = 0°C to 70°C | 4 | |
| Input Bias Current (-40°C to 85°C) | IB | -600 | 600 | pA | TA = -40°C to 85°C | 4 | |
| Input Voltage Range (Positive) | VCM | 3.8 | 4 | V | Guaranteed by CMRR | 4 | |
| Input Voltage Range (Negative) | VCM | 0.7 | 1 | V | Guaranteed by CMRR | 4 | |
| Common Mode Rejection Ratio | CMRR | 107 | 135 | dB | VCM = 1V to 3.8V | 4 | |
| Minimum Supply Voltage | 2.4 | 2.7 | V | Guaranteed by PSRR | 4 | ||
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = 2.7V to 36V, VCM = 1/2VS | 4 | |
| Large-Signal Voltage Gain (RL = 10k) | AVOL | 300 | 2000 | V/mV | RL = 10k, VOUT = 1V to 4V | 4 | |
| Channel Separation | 110 | 140 | dB | VOUT = 1V to 4V | 4 | ||
| Maximum Output Swing Positive (No Load) | VOUT | 35 | 55 | mV | No Load, 50mV Overdrive | 5 | |
| Maximum Output Swing Positive (No Load, second temperature row) | VOUT | 65 | mV | No Load, 50mV Overdrive | 5 | ||
| Maximum Output Swing Negative (No Load) | VOUT | 40 | 55 | mV | No Load, 50mV Overdrive | 5 | |
| Maximum Output Swing Negative (No Load, second temperature row) | VOUT | 65 | mV | No Load, 50mV Overdrive | 5 | ||
| Output Short-Circuit Current (Source) | ISC | 4 | 10 | 14 | mA | VOUT = 0V, 1V Overdrive, Source | 5 |
| Output Short-Circuit Current (Sink) | ISC | 4 | 10 | 21 | mA | VOUT = 5V, -1V Overdrive, Sink | 5 |
| Gain Bandwidth Product (0°C to 70°C) | GBW | 250 | 330 | kHz | f = 10kHz | 5 | |
| Gain Bandwidth Product (-40°C to 85°C) | GBW | 225 | kHz | f = 10kHz | 5 | ||
| Supply Current per Amplifier (25°C) | IS | 135 | 150 | µA | TA = 25°C; VS = 5V, 0V | 5 | |
| Supply Current per Amplifier (0°C to 70°C) | IS | 190 | µA | TA = 0°C to 70°C | 5 | ||
| Supply Current per Amplifier (-40°C to 85°C) | IS | 210 | µA | TA = -40°C to 85°C | 5 | ||
| Input Offset Voltage (25°C) | VOS | 35 | 160 | µV | TA = 25°C; VS = ±15V; VCM = 0V | 6 | |
| Input Offset Voltage (0°C to 70°C) | VOS | 210 | µV | TA = 0°C to 70°C | 6 | ||
| Input Offset Voltage (-40°C to 85°C) | VOS | 225 | µV | TA = -40°C to 85°C | 6 | ||
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 1.3 | µV/°C | 6 | ||
| Input Offset Current (25°C) | IOS | 20 | 300 | pA | TA = 25°C; VS = ±15V | 6 | |
| Input Offset Current (0°C to 70°C) | IOS | 450 | pA | TA = 0°C to 70°C | 6 | ||
| Input Offset Current (-40°C to 85°C) | IOS | 600 | pA | TA = -40°C to 85°C | 6 | ||
| Input Bias Current (25°C) | IB | -300 | 20 | 300 | pA | TA = 25°C; VS = ±15V | 6 |
| Input Bias Current (0°C to 70°C) | IB | -450 | 450 | pA | TA = 0°C to 70°C | 6 | |
| Input Bias Current (-40°C to 85°C) | IB | -600 | 600 | pA | TA = -40°C to 85°C | 6 | |
| Input Voltage Range | VCM | -13.5 | 14 | V | Guaranteed by CMRR | 6 | |
| Common Mode Rejection Ratio (first row) | CMRR | 115 | 135 | dB | VCM = -13.5V to 13.5V | 6 | |
| Minimum Supply Voltage | 1.2 | 1.35 | V | Guaranteed by PSRR | 6 | ||
| Power Supply Rejection Ratio | PSRR | 112 | 135 | dB | VS = ±1.35V to ±18V | 6 | |
| Large-Signal Voltage Gain (RL = 10k, first row) | AVOL | 1000 | 2000 | V/mV | RL = 10k, VOUT = -13.5V to 13.5V | 6 | |
| Large-Signal Voltage Gain (RL = 10k, second row) | AVOL | 600 | V/mV | RL = 10k, VOUT = -13.5V to 13.5V | 6 | ||
| Channel Separation | 120 | 140 | dB | VOUT = -13.5V to 13.5V | 6 | ||
| Output Short-Circuit Current (Source) | ISC | 5 | 10 | 15 | mA | VOUT = 0V, 1V Overdrive (Source) | 7 |
| Output Short-Circuit Current (Sink) | ISC | 5 | 10 | 20 | mA | VOUT = 0V, -1V Overdrive (Sink) | 7 |
| Supply Current per Amplifier (25°C) | IS | 260 | 330 | µA | TA = 25°C; VS = ±15V | 7 | |
| Supply Current per Amplifier (0°C to 70°C) | IS | 380 | µA | TA = 0°C to 70°C | 7 | ||
| Supply Current per Amplifier (-40°C to 85°C) | IS | 400 | µA | TA = -40°C to 85°C | 7 | ||
| Total Supply Voltage (V+ to V-) | 40 | V | 2 | ||||
| Differential Input Voltage | 10 | V | Note 2 | 2 | |||
| Input Current | -10 | 10 | mA | Note 2 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient (GN16) | θJA | 135 | °C/W | GN16 package | 2 |
CAD (KiCad official)
- Symbol:
LT6012AIGN#PBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
lt6012aign-etched.step/lt6012aign-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6012aign.step/lt6012aign.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
7ffe2dfde236bb60, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).