LT6010CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NULL	passive	Offset null terminal; a 50k potentiometer between the two NULL pins (wiper to V+... see datasheet figures) trims VOS by about ±0.9mV.
2	-IN	input	Inverting input with 500Ω series protection resistor; differential input limited to 10V and input current to ±10mA, common mode range V- + 1V to V+ - 1.2V.
3	+IN	input	Noninverting input with 500Ω series protection resistor; differential input limited to 10V and input current to ±10mA, common mode range V- + 1V to V+ - 1.2V.
4	V-	power_in	Negative supply (or ground in single-supply use); total supply V+ to V- up to 40V maximum.
5	SHDN	input	Shutdown pin: at or below V- + 0.2V the part operates normally, at V- + 2.0V or more supply current drops to about 12µA; internal 85k resistor at the pin.
6	OUT	output	Rail-to-rail output swinging to within about 40mV of either supply rail, with indefinite short-circuit duration.
7	V+	power_in	Positive supply; operates from 2.7V to 36V total supply (40V absolute maximum between V+ and V-).
8	NULL	passive	Offset null terminal; used with pin 1 and a 50k potentiometer to trim input offset voltage.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SO-8
Category	Amplifiers
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Total Supply Voltage	V+ to V-			40	V		2
Differential Input Voltage				10	V	Note 2	2
Input Current		-10		10	mA	Note 2	2
Maximum Junction Temperature	TJMAX			150	°C	SO-8 package	2
Storage Temperature Range		-65		150	°C	SO-8 package	2
Lead Temperature				300	°C	Soldering, 10 sec	2
Operating Temperature Range		-40		85	°C	Note 4	2
Thermal Resistance Junction-Ambient	θJA		190		°C/W	S8 package	2
Input Offset Voltage	VOS		20	55	µV	LT6010S8, VS=5V,0V, TA=25°C	2
Input Offset Voltage	VOS			85	µV	LT6010S8, VS=5V,0V, TA=0°C to 70°C	2
Input Offset Voltage	VOS			110	µV	LT6010S8, VS=5V,0V, TA=-40°C to 85°C	2
Input Offset Voltage Drift	∆VOS/∆T		0.2	0.8	µV/°C	LT6010S8, VS=5V,0V, Note 6	2
Input Offset Current	IOS		40	200	pA	LT6010S8, VS=5V,0V, TA=25°C	3
Input Offset Current	IOS			300	pA	LT6010S8, VS=5V,0V, TA=0°C to 70°C	3
Input Offset Current	IOS			400	pA	LT6010S8, VS=5V,0V, TA=-40°C to 85°C	3
Input Bias Current	IB	-200	40	200	pA	LT6010S8, VS=5V,0V, TA=25°C	3
Input Bias Current	IB	-300		300	pA	LT6010S8, VS=5V,0V, TA=0°C to 70°C	3
Input Bias Current	IB	-400		400	pA	LT6010S8, VS=5V,0V, TA=-40°C to 85°C	3
Input Voltage Range (Positive)	VCM	3.8	4		V	Guaranteed by CMRR, VS=5V,0V	3
Common Mode Rejection Ratio	CMRR	107	135		dB	VCM = 1V to 3.8V, VS=5V,0V	3
Power Supply Rejection Ratio	PSRR	112	135		dB	VS = 2.7V to 36V, VCM = 1/2VS	3
Large-Signal Voltage Gain	AVOL	300	2000		V/mV	RL = 10k, VOUT = 1V to 4V, VS=5V,0V	3
Large-Signal Voltage Gain	AVOL	250	2000		V/mV	RL = 2k, VOUT = 1V to 4V, VS=5V,0V	3
Maximum Output Swing (Positive, Referred to V+)	VOUT		35	55	mV	No Load, 50mV Overdrive, VS=5V,0V, TA=25°C	3
Maximum Output Swing (Positive, Referred to V+)	VOUT		120	170	mV	ISOURCE = 1mA, 50mV Overdrive, VS=5V,0V, TA=25°C	3
Maximum Output Swing (Negative, Referred to 0V)	VOUT		40	55	mV	No Load, 50mV Overdrive, VS=5V,0V, TA=25°C	3
Maximum Output Swing (Negative, Referred to 0V)	VOUT		150	225	mV	ISINK = 1mA, 50mV Overdrive, VS=5V,0V, TA=25°C	3
Output Short-Circuit Current (Source)	ISC	10	14		mA	VOUT = 0V, 1V Overdrive, VS=5V,0V	4
Output Short-Circuit Current (Sink)	ISC	10	21		mA	VOUT = 5V, -1V Overdrive, VS=5V,0V	4
Slew Rate	SR	0.06	0.09		V/µs	AV = -10, RF = 50k, RG = 5k, VS=5V,0V	4
Slew Rate	SR	0.05			V/µs	TA = 0°C to 70°C, VS=5V,0V	4
Slew Rate	SR	0.04			V/µs	TA = -40°C to 85°C, VS=5V,0V	4
Gain Bandwidth Product	GBW	250	330		kHz	f = 10kHz, VS=5V,0V	4
Gain Bandwidth Product	GBW	225			kHz	f = 10kHz, full temperature range, VS=5V,0V	4
SHDN Pin Current (On)	ISHDN			0.25	µA	SHDN ≤ V- + 0.2V, VS=5V,0V	4
SHDN Pin Current (Off)	ISHDN		15	25	µA	SHDN = V- + 2.0V, VS=5V,0V	4
Supply Current	IS		135	150	µA	SHDN ≤ V- + 0.2V (On), VS=5V,0V	4
Supply Current	IS			190	µA	SHDN ≤ V- + 0.2V (On), TA = 0°C to 70°C, VS=5V,0V	4
Supply Current	IS			210	µA	SHDN ≤ V- + 0.2V (On), TA = -40°C to 85°C, VS=5V,0V	4
Supply Current (Shutdown)	IS		12	25	µA	SHDN = V- + 2.0V (Off), VS=5V,0V	4
Supply Current (Shutdown)	IS			50	µA	SHDN = V- + 2.0V (Off), full temperature range, VS=5V,0V	4
Input Offset Voltage	VOS		20	85	µV	LT6010S8, VS=±15V, TA=25°C	4
Input Offset Voltage	VOS			120	µV	LT6010S8, VS=±15V, TA=0°C to 70°C	4
Input Offset Voltage	VOS			160	µV	LT6010S8, VS=±15V, TA=-40°C to 85°C	4
Input Offset Voltage Drift	∆VOS/∆T		0.2	0.8	µV/°C	LT6010S8, VS=±15V, Note 6	4
Input Offset Current	IOS		40	200	pA	LT6010S8, VS=±15V, TA=25°C	4
Input Bias Current	IB	-200	40	200	pA	LT6010S8, VS=±15V, TA=25°C	5
Input Voltage Range	VCM	-13.5		13.5	V	Guaranteed by CMRR, VS=±15V	5
Common Mode Rejection Ratio	CMRR	115	135		dB	VCM = -13.5V to 13.5V, VS=±15V	5
Common Mode Rejection Ratio	CMRR	112			dB	VCM = -13.5V to 13.5V, full temperature range, VS=±15V	5
Power Supply Rejection Ratio	PSRR	112	135		dB	VS = ±1.35V to ±18V	5
Maximum Output Swing (Positive, Referred to V+)	VOUT		45	80	mV	No Load, 50mV Overdrive, VS=±15V, TA=25°C	5
Maximum Output Swing (Negative)	VOUT		45	80	mV	No Load, 50mV Overdrive, VS=±15V, TA=25°C	5
Slew Rate	SR	0.08	0.11		V/µs	AV = -10, RF = 50k, RG = 5k, VS=±15V	6
Gain Bandwidth Product	GBW	275	350		kHz	f = 10kHz, VS=±15V	6
SHDN Pin Current (Off)	ISHDN		15	25	µA	SHDN = V- + 2.0V, VS=±15V	6
Supply Current	IS		260	330	µA	SHDN ≤ V- + 0.2V (On), VS=±15V	6
Supply Current	IS			400	µA	SHDN ≤ V- + 0.2V (On), TA = -40°C to 85°C, VS=±15V	6
Supply Current (Shutdown)	IS		18	50	µA	SHDN = V- + 2.0V (Off), VS=±15V	6

CAD (KiCad official)

Symbol: LT6010CS8#PBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)
3D model files: lt6010cs8-pbf-etched.step / lt6010cs8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6010cs8-pbf.step / lt6010cs8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (16 pp, sha256 c70326b044f372ef, retrieved 2026-10-31, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT6010CS8#PBF

Verified LT6010CS8#PBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README