main
History Download
Ray Publish 0.1.0 cd86f1d

LT3990EDD#PBF

Analog Devices · DC-DC Converters · DFN-10-EP(3x3)

LT3990EDD#PBF from Analog Devices, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback input regulated to 1.21V; the feedback resistor divider tap connects to this pin.
2 EN/UVLO input The part is in shutdown when this pin is low and active when high, with a 1.19V rising threshold and 35mV hysteresis, accurate only when VIN is above 4.2V.
3 VIN power_in Supplies current to the internal circuitry and the internal power switch and must be locally bypassed.
4 GND power_in Ground connection for the regulator.
5 GND power_in Ground connection for the regulator.
6 SW output Output of the internal power switch; connect this pin to the inductor.
7 BOOST input Provides a drive voltage higher than the input voltage to the internal NPN power switch, requiring at least 1.8V across the boost capacitor for full saturation.
8 BD power_in Anode of the boost diode that also supplies current to the internal regulator when BD is above 3.2V.
9 PG output Open-drain power good output that remains low until FB is within 10% of the regulation voltage and is valid when VIN is above 4.2V and EN/UVLO is high.
10 RT passive A resistor tied between RT and ground sets the switching frequency.
11 GND power_in Exposed pad ground that must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 4 4.2 V 3
Quiescent Current from VIN IQ 0.7 1.2 µA VEN/UVLO Low 3
Quiescent Current from VIN IQ 1.9 2.8 µA VEN/UVLO High 3
Quiescent Current from VIN IQ 4 µA VEN/UVLO High; l (full operating temperature range) 3
LT3990 Feedback Voltage VFB 1.195 1.21 1.225 V 3
LT3990 Feedback Voltage VFB 1.185 1.21 1.235 V l (full operating temperature range) 3
LT3990 FB Pin Bias Current IFB 0.1 20 nA l (full operating temperature range); Note 3 3
FB/Output Voltage Line Regulation 0.0002 0.01 %/V 4.2V < VIN < 40V 3
Switching Frequency fSW 1.84 2.3 2.76 MHz RT = 41.2k, VIN = 6V 3
Switching Frequency fSW 672 840 1008 kHz RT = 158k, VIN = 6V 3
Switching Frequency fSW 168 210 252 kHz RT = 768k, VIN = 6V 3
Switch Current Limit ILIM 535 700 865 mA VIN = 5V, VFB = 0V 3
Catch Schottky Current Limit 360 450 540 mA VIN = 5V 3
Switch Leakage Current 0.05 2 µA 3
Catch Schottky Reverse Leakage 0.05 2 µA VSW = 12V 3
Boost Schottky Reverse Leakage 0.02 2 µA VREVERSE = 12V 3
BOOST Pin Current 8.5 12 mA ISW = 200mA, VBOOST = 15V 3
EN/UVLO Pin Current 1 30 nA VEN/UVLO = 12V 3
EN/UVLO Voltage Threshold 1.14 1.19 1.28 V EN/UVLO Rising, VIN ≥ 4.2V; l (full operating temperature range) 3
PG Threshold Offset from Feedback Voltage 6.5 10 13.5 % VFB Rising 3
PG Hysteresis as % of Output Voltage 1 % 3
PG Leakage 0.01 1 µA VPG = 3V 3
PG Sink Current 30 80 µA VPG = 0.4V; l (full operating temperature range) 3
Minimum Switch Off-Time 100 160 ns VIN = 10V; l (full operating temperature range) 3
Absolute Maximum BOOST Pin Above SW Pin 30 V 2
Absolute Maximum FB/VOUT and RT Voltage 6 V 2
Absolute Maximum PG and BD Voltage 30 V 2
Operating Junction Temperature Range (E grade) TJ -40 125 °C LT3990E 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction to Ambient θJA 45 °C/W DD package (10-lead DFN) 2
Thermal Resistance Junction to Case θJC 10 °C/W DD package (10-lead DFN) 2

CAD (KiCad official)

  • Symbol: LT3990EDD#PBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt3990edd-pbf-etched.step / lt3990edd-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3990edd-pbf.step / lt3990edd-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 9b5280ede098d3fb, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF