LT3757IMSE#PBF

{
  "slug": "lt3757imse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt3757imse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3757imse-pbf.kicad_sym",
    "lt3757imse-pbf.kicad_mod",
    "lt3757imse-pbf.glb",
    "lt3757imse-pbf.step",
    "lt3757imse-pbf.lbr",
    "docs/hero.png",
    "docs/lt3757imse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3757imse-pbf-hero.glb",
    "lt3757imse-pbf-hero.overlay.json",
    "lt3757imse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3757IMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883396206735360",
    "parts": {
      "symbol": "lt3757imse-pbf.kicad_sym",
      "footprint": "lt3757imse-pbf.kicad_mod",
      "model_3d": "lt3757imse-pbf-hero.glb",
      "model_3d_plain": "lt3757imse-pbf-etched.glb",
      "model_3d_step": "lt3757imse-pbf-etched.step",
      "model_3d_step_plain": "lt3757imse-pbf.step",
      "lbr": "lt3757imse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C117124",
      "digikey": "505-LT3757IMSE#PBF-ND",
      "mouser": "584-LT3757IMSE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T05:26:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3757IMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3757IMSE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VC",
        "type": "passive",
        "description": "Error amplifier compensation pin used to stabilize the voltage loop with an external RC network."
      },
      {
        "number": "2",
        "name": "FBX",
        "type": "input",
        "description": "Positive and negative feedback pin that receives the feedback voltage from the external resistor divider across the output, regulated at 1.6V (positive) or -0.8V (negative), and also modulates frequency during start-up and faults when FBX is close to GND."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin with a 10µA (typical) pull-up to an internal 2.5V rail that sets the soft-start interval via an external capacitor and is reset to GND by UVLO, INTVCC under/overvoltage, or thermal lockout."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "passive",
        "description": "Switching frequency adjustment pin; set the frequency with a resistor to GND, and do not leave this pin open."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "input",
        "description": "Frequency synchronization pin; choose the RT resistor for a switching frequency 20% slower than the SYNC pulse frequency, and tie to GND if unused (ignored when FBX is close to GND)."
      },
      {
        "number": "6",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input for the control loop, Kelvin connected to the positive terminal of the N-channel MOSFET source sense resistor, with its negative terminal tied to the GND plane close to the IC."
      },
      {
        "number": "7",
        "name": "GATE",
        "type": "output",
        "description": "N-channel MOSFET gate driver output that switches between INTVCC and GND, and is driven to GND when the IC is shut down, in thermal lockout, or when INTVCC is outside its OV/UV thresholds."
      },
      {
        "number": "8",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Regulated 7.2V (typical) supply for internal loads and gate driver that must be bypassed with at least 4.7µF close to the pin; it may connect directly to VIN if VIN is below 17.5V and must not exceed 17.5V when driven externally."
      },
      {
        "number": "9",
        "name": "SHDN/UVLO",
        "type": "input",
        "description": "Shutdown and undervoltage detect pin with an accurate 1.22V (nominal) falling threshold; tie to 0.4V or less to disable the device and reduce VIN quiescent current below 1µA."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin that must be locally bypassed with a 0.22µF or larger capacitor placed close to the pin; operating range is 2.9V to 40V."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that also serves as the negative terminal of the current sense resistor and must be soldered directly to the local ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names come from the MSE (10-lead MSOP) top-view figure on page 2 and the Pin Functio; Pin 11 is the exposed thermal pad (not a printed lead) and is labeled GND in the datasheet; confirm ; Page 2 order table lists the MSOP as '10-Lead (3mm × 3mm) Plastic MSOP', which is an inconsistent pa"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0458,
        "at": "2026-10-18T05:21:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883396206735360",
        "pages": 36,
        "sha256": "1f145722dfa27e74",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3757imse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3757imse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6e568cdcb39dffb91aad7417eb0c56ab0f0ec86a619ee220012d8701fddb8fd7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}