LT3757EMSE#TRPBF

{
  "slug": "lt3757emse-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt3757emse#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3757emse-trpbf.kicad_sym",
    "lt3757emse-trpbf.kicad_mod",
    "lt3757emse-trpbf.glb",
    "lt3757emse-trpbf.step",
    "lt3757emse-trpbf.lbr",
    "docs/hero.png",
    "docs/lt3757emse-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3757emse-trpbf-hero.glb",
    "lt3757emse-trpbf-hero.overlay.json",
    "lt3757emse-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3757EMSE#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590006382432063488",
    "parts": {
      "symbol": "lt3757emse-trpbf.kicad_sym",
      "footprint": "lt3757emse-trpbf.kicad_mod",
      "model_3d": "lt3757emse-trpbf-hero.glb",
      "model_3d_plain": "lt3757emse-trpbf-etched.glb",
      "model_3d_step": "lt3757emse-trpbf-etched.step",
      "model_3d_step_plain": "lt3757emse-trpbf.step",
      "lbr": "lt3757emse-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580135",
      "digikey": "LT3757EMSE#TRPBFTR-ND",
      "mouser": "584-LT3757EMSE#TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T21:55:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3757EMSE#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3757EMSE#TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VC",
        "type": "passive",
        "description": "Error amplifier compensation pin that stabilizes the voltage loop when used with an external RC network."
      },
      {
        "number": "2",
        "name": "FBX",
        "type": "input",
        "description": "Positive and negative feedback pin that receives the output feedback from an external resistor divider, regulating to 1.6V (positive output) or -0.8V (negative output), with absolute maximum rating of -6V to 6V."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin whose interval is set by an external capacitor, with a 10µA (typical) pull-up to an internal 2.5V rail, reset to GND by SHDN/UVLO or INTVCC undervoltage/overvoltage conditions or thermal lockout."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "passive",
        "description": "Switching frequency adjustment pin where a resistor to GND sets the frequency over 100kHz to 1MHz, and which must not be left open (absolute maximum 1.5V)."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "input",
        "description": "Frequency synchronization pin where RT must be chosen for a switching frequency 20% slower than the SYNC pulse frequency, tied to GND if unused, with input low maximum 0.4V, input high minimum 1.5V and absolute maximum 8V."
      },
      {
        "number": "6",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input that must be Kelvin connected to the positive terminal of the source-side sense resistor, with a 110mV (typical) current limit threshold and an absolute rating of ±0.3V."
      },
      {
        "number": "7",
        "name": "GATE",
        "type": "output",
        "description": "N-channel MOSFET gate driver output that switches between INTVCC and GND and is driven low when the IC is shut down, in thermal lockout, or when INTVCC is outside its OV or UV thresholds."
      },
      {
        "number": "8",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Regulated 7.2V (typical) supply for internal loads and the gate driver that must be bypassed with at least 4.7µF close to the pin, and which may be connected directly to VIN only if VIN is below 17.5V."
      },
      {
        "number": "9",
        "name": "SHDN/UVLO",
        "type": "input",
        "description": "Shutdown and undervoltage detect pin with an accurate 1.22V (nominal) falling threshold, where tying it to 0.4V or less disables the device and reduces VIN quiescent current below 1µA, and absolute maximum rating of 40V."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin with an operating range of 2.9V to 40V that must be locally bypassed with at least 0.22µF close to the pin."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that also serves as the negative terminal of the current sense resistor and must be soldered directly to the local ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the MSE (10-lead MSOP) package drawing and pin functions, which matches LT3757EMSE; Pin types are KiCad-class judgment calls: VC, SS and RT are classed passive (compensation/RC/resisto; The datasheet does not give a separate specs field for this request beyond the pin descriptions; hea"
        ],
        "pages_sent": 8,
        "cost_usd": 0.061,
        "at": "2026-10-20T21:48:51"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590006382432063488",
        "pages": 38,
        "sha256": "135b698b902be7e1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3757emse-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3757emse-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6fd1834ddf87d44b9113bb417c08320d8d78ddc7bd3804adec09497ea1368fd8",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}