main
Ray Publish 0.1.0 9f129cb

LT3663EMS8E#PBF

Analog Devices · DC-DC Converters · MSOP-8-EP

LT3663EMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Supplies current to the internal regulator and power switch (operating 7.5V to 36V, 60V transient) and must be capacitively bypassed to ground.
2 RUN input Shutdown pin: tie to ground to shut down, tie to 2.5V or more for normal operation, or connect to VIN if the shutdown feature is not used.
3 FB input Feedback pin of the LT3663 regulated to 0.8V; connect the feedback resistor divider tap here.
4 ILIM passive Output current limit program pin; connect a resistor to ground to program the regulator output current limit (0.4A to 1.2A).
5 VOUT passive Connected to the negative terminal of the internal output current limit sense resistor.
6 ISENSE passive Positive input to the internal output current limit sense resistor and the anode of the internal BOOST diode.
7 BOOST passive Provides a drive voltage higher than the input voltage to the internal power switch and is internally connected to the cathode of the BOOST diode.
8 SW output Output of the internal power switch; connect to the inductor, catch diode and boost capacitor.
9 GND power_in Exposed pad ground that must be soldered to the PCB and electrically connected to ground, using a large ground plane and thermal vias.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Undervoltage Lockout Rising 7 7.5 V full temperature range 3
VIN Undervoltage Lockout Hysteresis 500 mV 3
VIN Overvoltage Lockout Rising 36 39 41 V full temperature range 3
VIN Overvoltage Lockout Hysteresis 1 V 3
VIN Supply Current Not Switching 2.4 3.2 mA Not Switching 3
VIN Supply Current in Shutdown 0.01 2 µA VRUN = 0V 3
Run Input Voltage High 2.5 V 3
Run Input Voltage Low 0.3 V 3
Run Pin Bias Current 6 15 µA VRUN = 2.3V (Note 4) 3
Run Pin Bias Current 0.01 0.1 µA VRUN = 0V 3
VOUT Current Limit Range 0.4 1.2 A full temperature range 3
VOUT Current Limit 0.8 1 1.2 A RILIM = 36.5k, full temperature range 3
Operating Frequency LT3663 fSW 1350 1500 1650 kHz LT3663 3
Maximum Duty Cycle 80 92 % full temperature range 3
Feedback Voltage VFB 784 800 816 mV LT3663, full temperature range 3
FB Bias Current 50 150 nA VFB = 0.8V, LT3663 3
Switch Peak Current Limit 1.6 2 2.5 A Note 5, full temperature range 3
Switch VCESAT VCESAT 275 mV ISW = 1A 3
Minimum BOOST Voltage 1.85 2.2 V ISW = 1A (Note 6) 3
Boost Diode Drop 0.9 1.2 V IDIODE = 60mA 3
Boost Pin Current 28 mA ISW = 1A 3
Input Voltage (VIN) VIN 60 V Note 2 2
BOOST Pin Voltage 50 V 2
BOOST Pin Above SW Pin 25 V 2
VOUTS, VOUT, ISENSE, FB Pins 6 V 2
RUN Pin 60 V Note 2 2
Operating Junction Temperature Range LT3663E TJ -40 125 °C Note 3 2
Storage Temperature TSTG -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 35 °C/W MSE package, 8-lead MSOP 2

CAD (KiCad official)

  • Symbol: LT3663EMS8E#PBF
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lt3663ems8e-pbf-etched.step / lt3663ems8e-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3663ems8e-pbf.step / lt3663ems8e-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 ca22f1d13bde27d1, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF