Generated by kicad-footprint-generator · KiCad file format 20260206
LT3502EDC#TRMPBF
Analog Devices · DC-DC Converters · DFN-8-EP(2x2)
LT3502EDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supplies current to the internal regulator and internal power switch; input range 3V to 40V (absolute max 40V) and must be locally bypassed. |
| 2 | BD | power_in | Provides current to the internal boost Schottky diode; absolute maximum voltage 7V. |
| 3 | FB | input | Feedback pin regulated to 0.8V; connect the resistor divider tap here, VOUT = 0.8(1+R1/R2) with R2 of 10k a good value. |
| 4 | SHDN | input | Shutdown pin: tie to ground to shut down, tie to 2V or more for normal operation, tie to VIN if unused, must not exceed VIN, and R3/C4 here provide soft-start and frequency foldback. |
| 5 | GND | power_in | Ground pin. |
| 6 | DA | input | Connect the catch diode (D1) anode to this pin; it provides frequency foldback in extreme situations. |
| 7 | BOOST | passive | Provides a drive voltage higher than the input voltage to the internal NPN power switch; connect a boost capacitor from this pin to SW (absolute max 50V, 7V above SW). |
| 8 | SW | output | Output of the internal 500mA power switch; connect to the inductor, catch diode and boost capacitor. |
| 9 | EP | power_in | Exposed pad (pin 9) is GND and must be soldered to the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 40 | V | 2 | |||
| BOOST Voltage | 50 | V | 2 | ||||
| BOOST Pin Above SW Pin | 7 | V | 2 | ||||
| FB Voltage | 6 | V | 2 | ||||
| SHDN Voltage | 40 | V | 2 | ||||
| BD Voltage | 7 | V | 2 | ||||
| Operating Junction Temperature Range (LT3502E) | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-Ambient, 8-lead DFN | θJA | 102 | °C/W | DC package | 2 | ||
| Undervoltage Lockout | 2.6 | 2.8 | 3 | V | 3 | ||
| Quiescent Current at Shutdown | IQ | 0.5 | 2 | µA | VSHDN = 0V | 3 | |
| Quiescent Current Not Switching | IQ | 1.5 | 2 | mA | 3 | ||
| Feedback Voltage (2mm × 2mm DFN, full temp range) | VFB | 0.785 | 0.8 | 0.813 | V | 2mm × 2mm DFN, full operating temperature range | 3 |
| Feedback Voltage (2mm × 2mm DFN, 25°C) | VFB | 0.79 | 0.8 | 0.81 | V | 2mm × 2mm DFN | 3 |
| Reference Voltage Line Regulation | 0.005 | %/V | 3 | ||||
| FB Pin Bias Current | 15 | 50 | nA | Note 5 | 3 | ||
| Switching Frequency (25°C) | fSW | 0.9 | 1.1 | 1.3 | MHz | IDA < 500mA (LT3502) | 3 |
| Switching Frequency (full temp range) | fSW | 0.8 | 1.1 | 1.4 | MHz | IDA < 500mA (LT3502), full operating temperature range | 3 |
| Maximum Duty Cycle | 80 | 90 | % | 100mA Load (LT3502) | 3 | ||
| Switch VCESAT | 450 | mV | ISW = 500mA | 3 | |||
| Switch Current Limit | 0.75 | 0.9 | 1.1 | A | Note 3 | 3 | |
| Switch Active Current | 95 | 130 | µA | SW = 10V (Note 4) | 3 | ||
| Switch Active Current | 8 | 30 | µA | SW = 0V (Note 5) | 3 | ||
| BOOST Pin Current | 10 | 13 | mA | ISW = 500mA | 3 | ||
| Minimum BOOST Voltage Above Switch | 1.9 | 2.2 | V | ISW = 500mA | 3 | ||
| BOOST Schottky Forward Drop | 0.8 | 1 | V | IOUT = 100mA | 3 | ||
| DA Pin Current to Stop OSC | 500 | 650 | mA | 3 | |||
| SHDN Bias Current | 55 | 80 | µA | VSHDN = 5V | 3 | ||
| SHDN Bias Current | 1 | µA | VSHDN = 0V | 3 | |||
| SHDN Input Voltage High | 2 | V | 3 | ||||
| SHDN Input Voltage Low | 0.3 | V | 3 |
CAD (KiCad official)
- Symbol:
LT3502EDC#TRMPBF - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lt3502edc-trmpbf-etched.step/lt3502edc-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3502edc-trmpbf.step/lt3502edc-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
ee1026fdeba3ecdd, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).