3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3491EDC#TRMPBF
Analog Devices · LED Drivers · DFN-6-EP(2x2)
LT3491EDC#TRMPBF from Analog Devices, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin that must be locally bypassed; VIN operates from 2.5V minimum to 12V absolute maximum. |
| 2 | GND | power_in | Ground pin that should be tied directly to the local ground plane. |
| 3 | SW | output | Switch pin that connects to the inductor; minimize its trace area to reduce EMI, with a 32V absolute maximum. |
| 4 | CAP | output | Driver output connected to the internal Schottky cathode; the output capacitor and sense resistor connect here, clamped at 27V typical in open-LED condition with a 32V absolute maximum. |
| 5 | LED | input | Anode of the first LED and sense resistor connection; LED voltage absolute maximum is 32V. |
| 6 | CTRL | input | Dimming and shutdown pin; below 50mV disables the driver, 1.5V gives full LED current, must not be left floating, and 12V absolute maximum. |
| 7 | EXPOSED PAD | power_in | Exposed pad that should be soldered to PCB ground to achieve the rated thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x2) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (VIN) | VIN | 12 | V | 2 | |||
| SW Voltage | VSW | 32 | V | 2 | |||
| CAP Voltage | VCAP | 32 | V | 2 | |||
| CTRL Voltage | VCTRL | 12 | V | 2 | |||
| LED Voltage | VLED | 32 | V | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Minimum Operating Voltage | 2.5 | V | 2 | ||||
| Thermal Resistance Junction-to-Ambient (DFN) | θJA | 102 | °C/W | DC package | 2 | ||
| Thermal Resistance Junction-to-Case (DFN) | θJC | 20 | °C/W | DC package | 2 | ||
| LED Current Sense Voltage (VCAP, VLED) | VCAP, VLED | 190 | 200 | 210 | mV | VCAP = 30V | 2 |
| CAP, LED Pin Bias Current | 20 | 40 | µA | VCAP = 16V, VLED = 16V | 2 | ||
| VCAP, VLED Common Mode Minimum Voltage | 2.5 | V | 2 | ||||
| Supply Current | IQ | 2.6 | 4 | mA | VCAP = 16V, VLED = 15V, CTRL = 3V | 2 | |
| Supply Current in shutdown | IQ | 8 | 10 | µA | CTRL = 0V | 2 | |
| Switching Frequency | fSW | 1.8 | 2.3 | 2.8 | MHz | 2 | |
| Maximum Duty Cycle | 88 | 92 | % | 2 | |||
| Switch Current Limit | 260 | 350 | mA | 2 | |||
| Switch VCESAT | VCESAT | 200 | mV | ISW = 200mA | 2 | ||
| Switch Leakage Current | 0.1 | 5 | µA | VSW = 16V | 2 | ||
| VCTRL for Full LED Current | VCTRL | 1.5 | V | VCAP = 30V | 2 | ||
| VCTRL to Shut Down IC | VCTRL | 50 | mV | 2 | |||
| VCTRL to Turn On IC | VCTRL | 100 | mV | 2 | |||
| CTRL Pin Bias Current | 100 | nA | 2 | ||||
| CAP Pin Overvoltage Protection | 26 | 27 | 28 | V | 2 | ||
| Schottky Forward Drop | 0.8 | V | ISCHOTTKY = 100mA | 2 | |||
| Schottky Leakage Current | 4 | µA | VR = 20V | 2 |
CAD (KiCad official)
- Symbol:
LT3491EDC#TRMPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lt3491edc-trmpbf-etched.step/lt3491edc-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3491edc-trmpbf.step/lt3491edc-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
5a7d466a5b6409f5, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).