main
Ray
Publish 0.1.0
7b0c0d1
LT3470ITS8#TRPBF
Analog Devices · DC-DC Converters · TSOT-23-8
LT3470ITS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Tie to ground to shut down the LT3470; apply 2V or more for normal operation. |
| 2 | NC | unconnected | This pin can be left floating or connected to VIN. |
| 3 | VIN | power_in | Supplies current to the internal regulator and internal power switch and must be locally bypassed; input range is 4V to 40V. |
| 4 | GND | power_in | Tie to a local ground plane below the LT3470 and the circuit components; the feedback divider returns to this pin. |
| 5 | SW | output | Output of the internal power switch; connect to the inductor, catch diode and boost capacitor. |
| 6 | BOOST | power_in | Provides a drive voltage higher than the input voltage to the internal bipolar NPN power switch. |
| 7 | BIAS | power_in | Connects to the internal boost Schottky diode and internal regulator; tie to VOUT when VOUT > 2V, otherwise tie to VIN. |
| 8 | FB | input | The LT3470 regulates this feedback pin to 1.25V; connect the feedback resistor divider tap here. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | 4 | V | 3 | ||||
| FB Comparator Trip Voltage | VFB | 1.228 | 1.25 | 1.265 | V | VFB Falling | 3 |
| FB Voltage Line Regulation | 0.0006 | 0.01 | %/V | 4V < VIN < 40V | 3 | ||
| Switch Leakage Current | 0.7 | 1.5 | µA | 3 | |||
| Switch VCESAT | VCESAT | 215 | 300 | mV | ISW = 100mA (TS8 Package) | 3 | |
| Switch Top Current Limit | 250 | 325 | 435 | mA | VFB = 0V | 3 | |
| Catch Schottky Drop | 630 | 775 | mV | ISH = 100mA (TS8 Package) | 3 | ||
| Catch Schottky Reverse Leakage | 0.2 | 2 | µA | VSW = 10V | 3 | ||
| Boost Schottky Drop | 650 | 775 | mV | ISH = 30mA | 3 | ||
| Boost Schottky Reverse Leakage | 0.2 | 2 | µA | VSW = 10V, VBIAS = 0V | 3 | ||
| BOOST Pin Current | 7 | 12 | mA | ISW = 100mA | 3 | ||
| SHDN Pin Current | 1 | 5 | µA | VSHDN = 2.5V | 3 | ||
| VIN, SHDN Voltage | 40 | V | 2 | ||||
| BOOST Pin Voltage | 47 | V | 2 | ||||
| BOOST Pin Above SW Pin | 25 | V | 2 | ||||
| FB Voltage | 5 | V | 2 | ||||
| BIAS Voltage | 25 | V | 2 | ||||
| Maximum Junction Temperature | 125 | °C | LT3470E, LT3470I | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | LT3470I | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 140 | °C/W | TS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT3470ITS8#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
lt3470its8-trpbf-etched.step/lt3470its8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3470its8-trpbf.step/lt3470its8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
11bc45a540871010, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3470ITS8#TRPBF
**Analog Devices** · DC-DC Converters · TSOT-23-8
LT3470ITS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Tie to ground to shut down the LT3470; apply 2V or more for normal operation. |
| 2 | NC | unconnected | This pin can be left floating or connected to VIN. |
| 3 | VIN | power_in | Supplies current to the internal regulator and internal power switch and must be locally bypassed; input range is 4V to 40V. |
| 4 | GND | power_in | Tie to a local ground plane below the LT3470 and the circuit components; the feedback divider returns to this pin. |
| 5 | SW | output | Output of the internal power switch; connect to the inductor, catch diode and boost capacitor. |
| 6 | BOOST | power_in | Provides a drive voltage higher than the input voltage to the internal bipolar NPN power switch. |
| 7 | BIAS | power_in | Connects to the internal boost Schottky diode and internal regulator; tie to VOUT when VOUT > 2V, otherwise tie to VIN. |
| 8 | FB | input | The LT3470 regulates this feedback pin to 1.25V; connect the feedback resistor divider tap here. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | | 4 | | | V | | 3 |
| FB Comparator Trip Voltage | VFB | 1.228 | 1.25 | 1.265 | V | VFB Falling | 3 |
| FB Voltage Line Regulation | | | 0.0006 | 0.01 | %/V | 4V < VIN < 40V | 3 |
| Switch Leakage Current | | | 0.7 | 1.5 | µA | | 3 |
| Switch VCESAT | VCESAT | | 215 | 300 | mV | ISW = 100mA (TS8 Package) | 3 |
| Switch Top Current Limit | | 250 | 325 | 435 | mA | VFB = 0V | 3 |
| Catch Schottky Drop | | | 630 | 775 | mV | ISH = 100mA (TS8 Package) | 3 |
| Catch Schottky Reverse Leakage | | | 0.2 | 2 | µA | VSW = 10V | 3 |
| Boost Schottky Drop | | | 650 | 775 | mV | ISH = 30mA | 3 |
| Boost Schottky Reverse Leakage | | | 0.2 | 2 | µA | VSW = 10V, VBIAS = 0V | 3 |
| BOOST Pin Current | | | 7 | 12 | mA | ISW = 100mA | 3 |
| SHDN Pin Current | | | 1 | 5 | µA | VSHDN = 2.5V | 3 |
| VIN, SHDN Voltage | | | | 40 | V | | 2 |
| BOOST Pin Voltage | | | | 47 | V | | 2 |
| BOOST Pin Above SW Pin | | | | 25 | V | | 2 |
| FB Voltage | | | | 5 | V | | 2 |
| BIAS Voltage | | | | 25 | V | | 2 |
| Maximum Junction Temperature | | | | 125 | °C | LT3470E, LT3470I | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | Soldering, 10 sec | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | LT3470I | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 140 | | °C/W | TS8 package | 2 |
## CAD (KiCad official)
- Symbol: `LT3470ITS8#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `lt3470its8-trpbf-etched.step` / `lt3470its8-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3470its8-trpbf.step` / `lt3470its8-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt3470.pdf) (20 pp, sha256 `11bc45a540871010`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3470its8-trpbf-datasheet.pdf)