Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3462ES6#TRMPBF

Analog Devices · DC-DC Converters · TSOT-23-6

LT3462ES6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch pin that connects to external inductor L1 and the positive terminal of the transfer capacitor, with an absolute maximum SW voltage of 40V.
2 GND power_in Ground pin that must be tied directly to the local ground plane.
3 FB input Feedback pin that connects to the resistive divider tap, set by R1 = R2 • (VOUT/1.265V), with an absolute maximum FB voltage of 2.5V.
4 SDREF bidirectional Dual-function shutdown input and 1.265V reference output that is pulled to GND with an external N-FET to turn the regulator off and can supply up to 80µA to bias the feedback divider, with an absolute maximum SDREF voltage of 2.5V.
5 D passive Anode of the integrated Schottky diode that connects to the negative terminal of the transfer capacitor and external inductor L2, with an absolute maximum D voltage of -40V.
6 VIN power_in Input supply pin that must be locally bypassed and operates over a 2.5V to 16V range.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Operating Voltage 2.5 V 3
Maximum Operating Voltage 16 V 3
SDREF Voltage 1.245 1.265 1.285 V 10µA > ISDREF ≥ -80µA; ● full operating temperature range 3
SDREF Minus FB Voltage 1.235 1.263 1.285 V 10µA > ISDREF ≥ -80µA; ● full operating temperature range 3
FB Pin Bias Current 15 50 nA 3
Error Amp Offset Voltage -12 12 mV 3
SDREF Reference Source Current 120 180 µA SDREF >1.2V; ● full operating temperature range 3
Supply Current 2.9 6.5 mA FB = -0.05V, Not Switching 3
Supply Current 3.6 10 µA SDREF = 0V, FB = Open, VIN = 5V 3
Switching Frequency (LT3462) 0.8 1.2 1.6 MHz ● full operating temperature range 3
Maximum Duty Cycle (LT3462) 90 % ● full operating temperature range 3
Switch Current Limit 300 420 mA 3
Switch VCESAT 270 350 mV ISW = 250mA 3
Switch Leakage Current 0.01 1 µA VSW = 5V 3
Rectifier Leakage Current 0.03 4 µA VD = -40V 3
Rectifier Forward Drop 800 1100 mV ISCHOTTKY = 250mA 3
SDREF Voltage Low 0.2 V ● full operating temperature range 3
SDREF Off-State Pull-Up Current 1 2 3 µA 3
SDREF Turn-Off Current -300 -200 µA 3
Input Voltage (VIN) VIN 16 V 2
SW Voltage 40 V 2
D Voltage -40 V 2
SDREF, FB Voltage 2.5 V 2
Operating Ambient Temperature Range -40 85 °C Note 3 2
Maximum Junction Temperature 125 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 10 sec; TSOT-23 package only 2
Thermal Resistance, Junction-to-Ambient θJA 192 °C/W S6 TSOT-23 package 2

CAD (KiCad official)

  • Symbol: LT3462ES6#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lt3462es6-trmpbf-etched.step / lt3462es6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3462es6-trmpbf.step / lt3462es6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 86b1b84c8393c4c0, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF