← Commit history
Publish 0.2.0
8 files changed
+265−323
README.md+26−32@@ -2,7 +2,7 @@ **Analog Devices** · Current Source/Constant Current Source · SOT-223-4 -LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout @@ -11,7 +11,6 @@ LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions | 1 | SET | input | Set pin is the error amplifier's noninverting input and sources a fixed 10µA reference current, with RSET and ROUT setting IOUT from 0.5mA to the 200mA maximum rated level. | | 2 | OUT | power_out | Power output of the device; the minimum current source value is 0.5mA, below which the LT3092 will not regulate. The tab is internally tied to OUT and must be soldered to OUT on the PCB. | | 3 | IN | power_in | Input supplies power to the internal circuitry and the output load current, and must be 1.2V to 1.4V above the OUT pin depending on output load current (see the dropout voltage specifications). |-| 4 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications @@ -20,7 +19,7 @@ LT3092MPST#PBF from Analog Devices, in a SOT-223-4. Pinout and pin descriptions | Manufacturer | Analog Devices | | Package | SOT-223-4 | | Category | Power Supply Chip |-| Pins | 4 |+| Pins | 3 | ## Electrical characteristics @@ -28,33 +27,28 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| SET Pin Current (VIN = 2V, ILOAD = 1mA) | ISET | 9.9 | 10 | 10.1 | µA | VIN = 2V, ILOAD = 1mA | 4 |-| SET Pin Current (full range) | ISET | 9.8 | 10 | 10.2 | µA | 2V ≤ VIN ≤ 40V, 1mA ≤ ILOAD ≤ 200mA, l | 4 |+| SET Pin Current | ISET | 9.9 | 10 | 10.1 | µA | VIN = 2V, ILOAD = 1mA | 4 |+| SET Pin Current (full range) | ISET | 9.8 | 10 | 10.2 | µA | 2V ≤ VIN ≤ 40V, 1mA ≤ ILOAD ≤ 200mA; full operating temperature range | 4 | | Offset Voltage (VOUT, VSET) | VOS | -2 | | 2 | mV | VIN = 2V, ILOAD = 1mA | 4 |-| Offset Voltage (VOUT, VSET) over temperature | VOS | -4 | | 4 | mV | VIN = 2V, ILOAD = 1mA, l | 4 |-| Current Regulation ΔISET | ΔISET | | -0.1 | | nA | ΔILOAD = 1mA to 200mA | 4 |-| Current Regulation ΔVOS | ΔVOS | | -0.5 | -2 | mV | ΔILOAD = 1mA to 200mA, l | 4 |-| Line Regulation ΔISET | ΔISET | | 0.03 | 0.2 | nA/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 |-| Line Regulation ΔVOS | ΔVOS | | 0.003 | 0.01 | mV/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 |-| Minimum Load Current | | | 300 | 500 | µA | 2V ≤ VIN ≤ 40V, l | 4 |-| Dropout Voltage (ILOAD = 10mA) | VIN, VOUT | | 1.22 | 1.45 | V | ILOAD = 10mA, l | 4 |-| Dropout Voltage (ILOAD = 200mA) | VIN, VOUT | | 1.3 | 1.65 | V | ILOAD = 200mA, l | 4 |-| Current Limit | | 200 | | 300 | mA | VIN = 5V, VSET = 0V, VOUT = -0.1V, l | 4 |-| Reference Current RMS Output Noise | | | 0.7 | | nARMS | 10Hz ≤ f ≤ 100kHz | 4 |-| Ripple Rejection | | | 90 | | dB | f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF | 4 |-| Ripple Rejection | | | 75 | | dB | f = 10kHz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF | 4 |-| Ripple Rejection | | | 20 | | dB | f = 1MHz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF | 4 |-| Thermal Regulation | ISET | | 0.003 | | %/W | 10ms Pulse | 4 |-| IN Pin Voltage Relative to SET, OUT | VIN | -40 | | 40 | V | Relative to SET, OUT | 2 |-| SET Pin Current | ISET | -15 | | 15 | mA | Note 6 | 2 |-| SET Pin Voltage (Relative to OUT) | VSET | -10 | | 10 | V | Relative to OUT, Note 6 | 2 |-| Operating Junction Temperature Range (MP Grade) | TJ | -55 | | 125 | °C | MP Grade | 2 |-| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |-| Thermal Resistance Junction-to-Ambient (ST SOT-223) | θJA | | 24 | | °C/W | ST (3-lead SOT-223) package | 2 |-| Thermal Resistance Junction-to-Case (ST SOT-223) | θJC | | 15 | | °C/W | ST (3-lead SOT-223) package | 2 |-| Thermal Resistance Junction-to-Ambient vs copper area (ST SOT-223) | θJA | | 20 | | °C/W | Topside 2500mm2, backside 2500mm2, board area 2500mm2 | 15 |-| Thermal Resistance Junction-to-Ambient vs copper area (ST SOT-223) | θJA | | 24 | | °C/W | Topside 225mm2, backside 2500mm2, board area 2500mm2 | 15 |-| Thermal Resistance Junction-to-Ambient vs copper area (ST SOT-223) | θJA | | 29 | | °C/W | Topside 100mm2, backside 2500mm2, board area 2500mm2 | 15 |+| Offset Voltage (VOUT, VSET) (full range) | VOS | -4 | | 4 | mV | VIN = 2V, ILOAD = 1mA; full operating temperature range | 4 |+| Current Regulation (offset voltage) | ΔVOS | | -0.5 | -2 | mV | ΔILOAD = 1mA to 200mA; full operating temperature range | 4 |+| Line Regulation (reference current) | ΔISET | | 0.03 | 0.2 | nA/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 |+| Line Regulation (offset voltage) | ΔVOS | | 0.003 | 0.01 | mV/V | ΔVIN = 2V to 40V, ILOAD = 1mA | 4 |+| Minimum Load Current | | | 300 | 500 | µA | 2V ≤ VIN ≤ 40V; full operating temperature range | 4 |+| Dropout Voltage (VIN, VOUT) | | | 1.22 | 1.45 | V | ILOAD = 10mA; full operating temperature range | 4 |+| Dropout Voltage (VIN, VOUT) | | | 1.3 | 1.65 | V | ILOAD = 200mA; full operating temperature range | 4 |+| Current Limit | | 200 | | 300 | mA | VIN = 5V, VSET = 0V, VOUT = -0.1V; full operating temperature range | 4 |+| IN Pin Voltage Relative to SET, OUT | | -40 | | 40 | V | Relative to SET and OUT pins | 2 |+| SET Pin Current | | -15 | | 15 | mA | Note 6 | 2 |+| SET Pin Voltage (relative to OUT) | | -10 | | 10 | V | Relative to OUT, Note 6 | 2 |+| Storage Temperature Range | | -65 | | 150 | °C | | 2 |+| Operating Junction Temperature Range | TJ | -55 | | 125 | °C | MP grade | 2 |+| Input Voltage Range (VIN, VOUT) | VIN | 1.2 | | 40 | V | Wide input voltage range as stated in Features | 1 |+| Output Current Range | IOUT | 0.5 | | 200 | mA | Set by RSET and ROUT; maximum rated level 200mA | 8 |+| Junction-to-Ambient Thermal Resistance | θJA | | 24 | | °C/W | ST (3-lead SOT-223) package | 2 |+| Junction-to-Case Thermal Resistance | θJC | | 15 | | °C/W | ST (3-lead SOT-223) package | 2 |+| Junction-to-Ambient Thermal Resistance (2500mm2 copper) | θJA | | 20 | | °C/W | ST package; topside 2500mm2, backside 2500mm2, board area 2500mm2 | 14 |+| Junction-to-Ambient Thermal Resistance (100mm2 topside copper) | θJA | | 29 | | °C/W | ST package; topside 100mm2, backside 2500mm2, board area 2500mm2 | 15 | ## Materials and finish @@ -67,7 +61,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co ## CAD (KiCad official) - Symbol: `LT3092MPST#PBF`-- Footprint: `Package_TO_SOT_SMD:SOT-223`+- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2` - 3D model: SOT-223-4 (KiCad packages3D, STEP) - 3D model files: `lt3092mpst-pbf-etched.step` / `lt3092mpst-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3092mpst-pbf.step` / `lt3092mpst-pbf.glb` are the bare package body. @@ -75,8 +69,8 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf) (24 pp, sha256 `b59cebad3b0bef77`, retrieved 2026-10-30, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf) (24 pp, sha256 `b59cebad3b0bef77`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/lt3092mpst-pbf-datasheet.pdf)
lt3092mpst-pbf-hero.glb⋯ 1 unchanged line ⋯
lt3092mpst-pbf-hero.overlay.json+164−168@@ -1,172 +1,168 @@ {- "spec": "adom-hero 1.4",- "mpn": "LT3092MPST#PBF",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 4,- "span_mm": 8.4,- "dash_mm": 0.21,- "gap_mm": 0.126,- "pad_stroke_mm": 0.0504- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 5,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 4,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }+ "spec": "adom-hero 1.4",+ "mpn": "LT3092MPST",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 4,+ "span_mm": 8.4,+ "dash_mm": 0.21,+ "gap_mm": 0.126,+ "pad_stroke_mm": 0.0504 },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.664,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.5,- 3.5,- -2.684,- 2.684- ],- "pads_bbox_mm": [- -4.15,- 4.15,- -3.05,- 3.05- ],- "seating_z_mm": 0.0+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ } },- "sources": {- "glb": "lt3092mpst-pbf-etched.glb",- "glb_sha256": "f820db801bbf5a53bf4ec58602f832aa7c4ca9f774c003d34977fb0d2c18b029",- "footprint": "lt3092mpst-pbf.kicad_mod",- "footprint_sha256": "3fb9eb9578eab3bf96c905e34f67559805ccf01139c90968480f8c3ab8f54db0",- "pins": "page.json component.pins",- "pins_sha256": "367ea90487bcbd01c104c9c1c64c85766cc256eb26d6a4641e9de5a851bd2381"- },- "generator": "adom-wiki 1.8.2 (component_hero)",- "labels": [- {- "pad": "1",- "text": "SET",- "x": -4.3,- "y": -2.3,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "OUT",- "x": -4.3,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "IN",- "x": -4.3,- "y": 2.3,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "EP",- "x": 4.3,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.6- }+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": false,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.664,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.5,+ 3.5,+ -2.684,+ 2.684+ ],+ "pads_bbox_mm": [+ -4.15,+ 4.15,+ -3.05,+ 3.05 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -3.15,- -2.3- ],- "size_mm": [- 2.0,- 1.5- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -3.15,- 0.0- ],- "size_mm": [- 2.0,- 1.5- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -3.15,- 2.3- ],- "size_mm": [- 2.0,- 1.5- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- 3.15,- 0.0- ],- "size_mm": [- 2.0,- 3.8- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "lt3092mpst-pbf-etched.glb",+ "glb_sha256": "f820db801bbf5a53bf4ec58602f832aa7c4ca9f774c003d34977fb0d2c18b029",+ "footprint": "lt3092mpst-pbf.kicad_mod",+ "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+ "pins": "page.json component.pins",+ "pins_sha256": "648349f932b2f6414080f0b2f3703daadeb65b7aa2abba44631e6c6c267cc276"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "SET",+ "x": -4.3,+ "y": -2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "OUT",+ "x": -4.3,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "IN",+ "x": -4.3,+ "y": 2.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ -2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ 3.15,+ 0.0+ ],+ "size_mm": [+ 2.0,+ 3.8+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.15,+ 2.3+ ],+ "size_mm": [+ 2.0,+ 1.5+ ],+ "rot": 0.0+ }+ ]+}
lt3092mpst-pbf.kicad_mod+32−32@@ -1,4 +1,4 @@-(footprint "SOT-223"+(footprint "SOT-223-3_TabPin2" (version 20260206) (generator "pcbnew") (generator_version "10.0")@@ -8,7 +8,7 @@ (property "Reference" "REF**" (at 0 -4.5 0) (layer "F.SilkS")- (uuid "4497a1e1-94b1-4cba-abfc-02d82a04371f")+ (uuid "095b50a5-76ce-476b-aa10-37a37fa441f1") (effects (font (size 1 1)@@ -16,10 +16,10 @@ ) ) )- (property "Value" "SOT-223"+ (property "Value" "SOT-223-3_TabPin2" (at 0 4.5 0) (layer "F.Fab")- (uuid "222a057b-4f1f-481e-81c0-82276f6e2fbf")+ (uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449") (effects (font (size 1 1)@@ -27,12 +27,12 @@ ) ) )- (property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf"+ (property "Datasheet" "" (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes)- (uuid "cf35375b-a35a-4ccf-b401-52356d4eb3ab")+ (uuid "0fecb949-4744-4c65-8091-70f595847ba4") (effects (font (size 1.27 1.27)@@ -45,7 +45,7 @@ (unlocked yes) (layer "F.Fab") (hide yes)- (uuid "e0b857b7-85f4-442e-9375-43b7f0b65024")+ (uuid "7dd6192e-e612-428f-816e-6f28697542d5") (effects (font (size 1.27 1.27)@@ -63,7 +63,7 @@ (type solid) ) (layer "F.SilkS")- (uuid "10341b74-de1d-44f8-b919-9dc7b01c77a6")+ (uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d") ) (fp_line (start -1.85 3.41)@@ -73,7 +73,7 @@ (type solid) ) (layer "F.SilkS")- (uuid "9eaaee9c-d787-4c4e-9409-486f5d803253")+ (uuid "6e43f798-7915-403c-b947-4851bde35045") ) (fp_line (start 1.91 -3.41)@@ -83,7 +83,7 @@ (type solid) ) (layer "F.SilkS")- (uuid "668bbda1-c7e1-4e23-9d62-dd4d052018b0")+ (uuid "ddfc40c4-e33c-493e-b735-24282440d539") ) (fp_line (start 1.91 3.41)@@ -93,7 +93,7 @@ (type solid) ) (layer "F.SilkS")- (uuid "7b7161b8-bc72-4822-9d67-8c4bc120433f")+ (uuid "79366377-6a9f-460a-b0d1-788467590954") ) (fp_poly (pts@@ -105,27 +105,27 @@ ) (fill yes) (layer "F.SilkS")- (uuid "818bd365-7a79-40a2-b037-dacc75b8af05")+ (uuid "27420593-f422-495a-9e17-88a99bcd8a3d") ) (fp_line- (start -1.85 -2.3)+ (start -1.85 -2.35) (end -1.85 3.35) (stroke (width 0.1) (type solid) ) (layer "F.Fab")- (uuid "2a9ca989-6b38-468d-a714-75a033988b2c")+ (uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc") ) (fp_line- (start -1.85 -2.3)- (end -0.8 -3.35)+ (start -1.85 -2.35)+ (end -0.85 -3.35) (stroke (width 0.1) (type solid) ) (layer "F.Fab")- (uuid "bcb7341f-c5b7-4cf0-ac84-66c574c5e61c")+ (uuid "f393364a-2641-4746-ba4c-6509ea1de503") ) (fp_line (start -1.85 3.35)@@ -135,17 +135,17 @@ (type solid) ) (layer "F.Fab")- (uuid "c011dc66-40ad-4f1e-a34f-e251dae0cd31")+ (uuid "27db54e0-f4a8-4972-bcbc-256787416dcd") ) (fp_line- (start -0.8 -3.35)+ (start -0.85 -3.35) (end 1.85 -3.35) (stroke (width 0.1) (type solid) ) (layer "F.Fab")- (uuid "80711826-0dce-449b-af78-388864936159")+ (uuid "be579ebe-38db-4860-98f0-9f530f704760") ) (fp_line (start 1.85 -3.35)@@ -155,12 +155,12 @@ (type solid) ) (layer "F.Fab")- (uuid "a66ee799-671f-4902-ac92-f94d39f82acf")+ (uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca") ) (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab")- (uuid "184c46b5-a004-48e0-8f63-d7d63dc324be")+ (uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b") (effects (font (size 0.8 0.8)@@ -173,28 +173,28 @@ (size 2 1.5) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)- (uuid "ea891fee-0855-44cc-8da9-0c7b9e3b1505")+ (uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448") ) (pad "2" smd roundrect (at -3.15 0) (size 2 1.5) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)- (uuid "2adbaf0f-7617-4618-9438-78a8bd4ec4b2")+ (uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8") )- (pad "3" smd roundrect- (at -3.15 2.3)- (size 2 1.5)+ (pad "2" smd roundrect+ (at 3.15 0)+ (size 2 3.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)- (uuid "1b42a1a5-e735-42f2-b87a-1df5a461081d")+ (uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e") )- (pad "4" smd roundrect- (at 3.15 0)- (size 2 3.8)+ (pad "3" smd roundrect+ (at -3.15 2.3)+ (size 2 1.5) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25)- (uuid "023f2cc5-97fb-4421-8e37-e8aa385789b4")+ (uuid "5046df04-2b74-45a5-867e-e33a5e51e59c") ) (embedded_fonts no) (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
lt3092mpst-pbf.kicad_sym+1−5@@ -16,11 +16,7 @@ (name "OUT" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 17.78 0.00 180) (length 5.08)- (name "EP" (effects (font (size 1.27 1.27))))- (number "4" (effects (font (size 1.27 1.27))))- )- (pin power_in line (at 17.78 -2.54 180) (length 5.08)+ (pin power_in line (at 17.78 0.00 180) (length 5.08) (name "IN" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) )
lt3092mpst-pbf.lbr+8−10@@ -52,12 +52,12 @@ <library> <description>Analog Devices Current Source/Constant Current Source, SOT-223-4. Pinout cross-checked by two models against the datasheet</description> <packages>-<package name="SOT-223">+<package name="SOT-223-3_TabPin2"> <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description> <smd name="1" x="-3.1500" y="2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/> <smd name="2" x="-3.1500" y="-0.0000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>+ <smd name="2@2" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/> <smd name="3" x="-3.1500" y="-2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>- <smd name="4" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/> <polygon width="0.1200" layer="21"> <vertex x="-3.1300" y="3.3100"/> <vertex x="-3.3700" y="3.6400"/>@@ -68,10 +68,10 @@ <wire x1="-1.8500" y1="-3.4100" x2="1.9100" y2="-3.4100" width="0.1200" layer="21"/> <wire x1="1.9100" y1="3.4100" x2="1.9100" y2="2.1500" width="0.1200" layer="21"/> <wire x1="1.9100" y1="-3.4100" x2="1.9100" y2="-2.1500" width="0.1200" layer="21"/>- <wire x1="-1.8500" y1="2.3000" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>- <wire x1="-1.8500" y1="2.3000" x2="-0.8000" y2="3.3500" width="0.1000" layer="51"/>+ <wire x1="-1.8500" y1="2.3500" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>+ <wire x1="-1.8500" y1="2.3500" x2="-0.8500" y2="3.3500" width="0.1000" layer="51"/> <wire x1="-1.8500" y1="-3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>- <wire x1="-0.8000" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>+ <wire x1="-0.8500" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/> <wire x1="1.8500" y1="3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/> <text x="0" y="4.010" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-4.010" size="1.27" layer="27" align="top-center">>VALUE</text>@@ -88,8 +88,7 @@ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text> <pin name="SET" x="-17.78" y="0" length="middle" direction="in"/> <pin name="OUT" x="-17.78" y="-2.54" length="middle" direction="out"/>- <pin name="EP" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>- <pin name="IN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+ <pin name="IN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>@@ -99,11 +98,10 @@ <gate name="G$1" symbol="LT3092MPST#PBF" x="0" y="0"/> </gates> <devices>- <device name="" package="SOT-223">+ <device name="" package="SOT-223-3_TabPin2"> <connects> <connect gate="G$1" pin="SET" pad="1"/>- <connect gate="G$1" pin="OUT" pad="2"/>- <connect gate="G$1" pin="EP" pad="4"/>+ <connect gate="G$1" pin="OUT" pad="2 2@2"/> <connect gate="G$1" pin="IN" pad="3"/> </connects> <technologies>
package.json+16−37@@ -1,8 +1,8 @@ { "slug": "lt3092mpst-pbf",- "version": "0.1.0",+ "version": "0.2.0", "type": "component",- "description": "Analog Devices Current Source/Constant Current Source, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "description": "Analog Devices Current Source/Constant Current Source, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [ "component", "power supply chip",@@ -28,14 +28,15 @@ "viewers/symbol.html", "viewers/footprint.html", "lt3092mpst-pbf-hero.glb",- "lt3092mpst-pbf-hero.overlay.json",- "lt3092mpst-pbf-etched.glb"+ "lt3092mpst-pbf-hero.overlay.json" ], "component": {- "mpn": "LT3092MPST#PBF",+ "mpn": "LT3092MPST",+ "land_source": "kicad",+ "land_note": "KiCad SOT-223-3_TabPin2: the tab is pad 2, the maker ties it to pin 2's signal; SOT-223 rule (b), part-reviewer / task master 2026-11-13: the maker prints pins 1-3 and ties the tab to pin 2 ('9 TAB IS OUT 2 OUT ')", "manufacturer": "Analog Devices", "package": "SOT-223-4",- "pin_count": 4,+ "pin_count": 3, "category": "Power Supply Chip", "subcategory": "Current Source/Constant Current Source", "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf",@@ -43,7 +44,7 @@ "symbol": "lt3092mpst-pbf.kicad_sym", "footprint": "lt3092mpst-pbf.kicad_mod", "model_3d": "lt3092mpst-pbf-hero.glb",- "model_3d_plain": "lt3092mpst-pbf-etched.glb",+ "model_3d_plain": "lt3092mpst-pbf.glb", "model_3d_step": "lt3092mpst-pbf-etched.step", "model_3d_step_plain": "lt3092mpst-pbf.step", "lbr": "lt3092mpst-pbf.lbr"@@ -54,7 +55,7 @@ "mouser": "584-LT3092MPST#PBF" }, "distributor_check": {- "checked_at": "2026-10-30T16:52:45Z",+ "checked_at": "2026-11-13T01:42:39Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "LT3092MPST#PBF-ND",@@ -83,32 +84,10 @@ "name": "IN", "type": "power_in", "description": "Input supplies power to the internal circuitry and the output load current, and must be 1.2V to 1.4V above the OUT pin depending on output load current (see the dropout voltage specifications)."- },- {- "number": "4",- "name": "EP",- "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)." } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-haiku-5-5",- "primary_mode": "text",- "consensus_model": "claude-sonnet-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "extractor flagged: The SOT-223 tab is internally tied to OUT and is not a numbered pin, so it is not listed as a separa; The page 2 SOT-223 top-view text is garbled in extraction. Pin numbers 1 (SET), 2 (OUT) and 3 (IN) w; The pin types (SET as input, OUT as power_out, IN as power_in) are inferred from the functional desc",- "exposed pad 4 added from the footprint"- ],- "pages_sent": 7,- "cost_usd": 0.042,- "at": "2026-10-30T16:52:38"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf", "pages": 24,@@ -117,8 +96,8 @@ }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {- "total": 4,- "described": 4,+ "total": 3,+ "described": 3, "cites_pages": true, "refuses_to_fabricate": true }@@ -144,7 +123,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",- "checked": "2026-10-30",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -162,13 +141,13 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "17da73b00e90756f450b78baf7a14092b6f652ce2469d1ac1fe052f4010059c1",- "checked": "2026-10-30",+ "sha256": "ab4923e1eed996f6963a029355b7663776f01c6640057a0c597e6b080f75e3c8",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "ST (ST3, 3-Lead Plastic SOT-223)",+ "package_code": "ST (3-Lead Plastic SOT-223, LTC DWG 05-08-1630)", "source_page": 21, "D": { "nom_mm": 6.505,
page.json+18−39@@ -4,7 +4,7 @@ "slug": "lt3092mpst-pbf", "title": "LT3092MPST#PBF", "brief": "Analog Devices Current Source/Constant Current Source, SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -14,10 +14,12 @@ "extractor-text" ], "component": {- "mpn": "LT3092MPST#PBF",+ "mpn": "LT3092MPST",+ "land_source": "kicad",+ "land_note": "KiCad SOT-223-3_TabPin2: the tab is pad 2, the maker ties it to pin 2's signal; SOT-223 rule (b), part-reviewer / task master 2026-11-13: the maker prints pins 1-3 and ties the tab to pin 2 ('9 TAB IS OUT 2 OUT ')", "manufacturer": "Analog Devices", "package": "SOT-223-4",- "pin_count": 4,+ "pin_count": 3, "category": "Power Supply Chip", "subcategory": "Current Source/Constant Current Source", "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf",@@ -25,7 +27,7 @@ "symbol": "lt3092mpst-pbf.kicad_sym", "footprint": "lt3092mpst-pbf.kicad_mod", "model_3d": "lt3092mpst-pbf-hero.glb",- "model_3d_plain": "lt3092mpst-pbf-etched.glb",+ "model_3d_plain": "lt3092mpst-pbf.glb", "model_3d_step": "lt3092mpst-pbf-etched.step", "model_3d_step_plain": "lt3092mpst-pbf.step", "lbr": "lt3092mpst-pbf.lbr"@@ -36,7 +38,7 @@ "mouser": "584-LT3092MPST#PBF" }, "distributor_check": {- "checked_at": "2026-10-30T16:52:45Z",+ "checked_at": "2026-11-13T01:42:39Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "LT3092MPST#PBF-ND",@@ -65,32 +67,10 @@ "name": "IN", "type": "power_in", "description": "Input supplies power to the internal circuitry and the output load current, and must be 1.2V to 1.4V above the OUT pin depending on output load current (see the dropout voltage specifications)."- },- {- "number": "4",- "name": "EP",- "type": "passive",- "description": "Exposed pad (from the footprint; not named in the datasheet pin table)." } ], "provenance": {- "extractor": "extract_pins 0.3",- "factory_chain": {- "factory": "2.0.0",- "extractor": "extract_pins 0.3",- "primary_model": "claude-haiku-5-5",- "primary_mode": "text",- "consensus_model": "claude-sonnet-5-5",- "consensus": "agreed",- "guards": "pin_guards 0.1: passed",- "guard_notes": [- "extractor flagged: The SOT-223 tab is internally tied to OUT and is not a numbered pin, so it is not listed as a separa; The page 2 SOT-223 top-view text is garbled in extraction. Pin numbers 1 (SET), 2 (OUT) and 3 (IN) w; The pin types (SET as input, OUT as power_out, IN as power_in) are inferred from the functional desc",- "exposed pad 4 added from the footprint"- ],- "pages_sent": 7,- "cost_usd": 0.042,- "at": "2026-10-30T16:52:38"- },+ "extractor": "ds2sf", "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3092.pdf", "pages": 24,@@ -99,8 +79,8 @@ }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {- "total": 4,- "described": 4,+ "total": 3,+ "described": 3, "cites_pages": true, "refuses_to_fabricate": true }@@ -126,7 +106,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",- "checked": "2026-10-30",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -144,13 +124,13 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "17da73b00e90756f450b78baf7a14092b6f652ce2469d1ac1fe052f4010059c1",- "checked": "2026-10-30",+ "sha256": "ab4923e1eed996f6963a029355b7663776f01c6640057a0c597e6b080f75e3c8",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": {- "package_code": "ST (ST3, 3-Lead Plastic SOT-223)",+ "package_code": "ST (3-Lead Plastic SOT-223, LTC DWG 05-08-1630)", "source_page": 21, "D": { "nom_mm": 6.505,@@ -581,10 +561,9 @@ "viewers/symbol.html", "viewers/footprint.html", "lt3092mpst-pbf-hero.glb",- "lt3092mpst-pbf-hero.overlay.json",- "lt3092mpst-pbf-etched.glb"+ "lt3092mpst-pbf-hero.overlay.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Analog Devices Current Source/Constant Current Source, SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }