component
LT3090EMSE#PBF
Public Made by Adomby adom
Analog Devices Linear Voltage Regulators (LDO), MSOP-12-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| lt3090emse-pbf-etched.glb | 10d ago |
| lt3090emse-pbf-etched.step | 10d ago |
| lt3090emse-pbf-hero.glb | 10d ago |
| lt3090emse-pbf-hero.overlay.json | 10d ago |
| lt3090emse-pbf.glb | 10d ago |
| lt3090emse-pbf.kicad_mod | 10d ago |
| lt3090emse-pbf.kicad_sym | 10d ago |
| lt3090emse-pbf.lbr | 10d ago |
| lt3090emse-pbf.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
LT3090EMSE#PBF
Analog Devices · Linear Voltage Regulators (LDO) · MSOP-12-EP
LT3090EMSE#PBF from Analog Devices, in a MSOP-12-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input pin that supplies power to the regulator; tie all IN pins together and to the exposed backside pad, and an input bypass capacitor of 2.2µF to 4.7µF generally suffices. |
| 2 | IN | power_in | Input pin that supplies power to the regulator; tie all IN pins together and to the exposed backside pad, and an input bypass capacitor of 2.2µF to 4.7µF generally suffices. |
| 3 | IN | power_in | Input pin that supplies power to the regulator; tie all IN pins together and to the exposed backside pad, and an input bypass capacitor of 2.2µF to 4.7µF generally suffices. |
| 4 | ILIM | input | Current limit programming pin; a resistor between ILIM and IN sets the limit (nominal scale factor 10A•kΩ), ILIM must not be driven more than 0.3V below IN, and it should be tied to IN if unused. |
| 5 | IMONP | output | Positive current monitor pin that sources current equal to 1/2000 of output current into a resistor to GND, must be at least 2V below IMONN, and must not be driven more than 0.3V below IN; tie to IN if unused. |
| 6 | IMONN | output | Negative current monitor pin that sinks current equal to 1/1000 of output current through a resistor to GND, must be at least 2V above IMONP for positive monitoring, and must not be driven more than 0.3V below IN; tie to GND if unused. |
| 7 | SHDN | input | Bidirectional shutdown pin referenced to GND that turns the output off within ±0.45V of GND and on beyond ±1.4V, must not be floated, and must not be driven more than 0.3V below IN. |
| 8 | SET | input | Inverting error amplifier input and regulation setpoint that receives a precision 50µA current; a resistor from SET to GND programs the output voltage, and SET must not be driven more than 0.3V below IN. |
| 9 | GND | power_in | Ground pin that supplies the quiescent current and NPN pass transistor drive current, and must not be driven more than 0.3V below IN. |
| 10 | OUT | power_out | Output pin that supplies power to the load; tie all OUT pins together, use a minimum 4.7µF output capacitor with ESR below 0.5Ω, and do not drive it more than 0.3V below IN. |
| 11 | OUT | power_out | Output pin that supplies power to the load; tie all OUT pins together, use a minimum 4.7µF output capacitor with ESR below 0.5Ω, and do not drive it more than 0.3V below IN. |
| 12 | OUT | power_out | Output pin that supplies power to the load; tie all OUT pins together, use a minimum 4.7µF output capacitor with ESR below 0.5Ω, and do not drive it more than 0.3V below IN. |
| 13 | IN | power_in | Exposed backside pad that is electrically connected to IN and the device substrate; it must be soldered to the PCB for proper electrical and thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-12-EP |
| Category | Power Management ICs |
| Pins | 13 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current (25C row, as printed) | ISET | 49.5 | 50 | 50.5 | µA | VIN = -1.9V, ILOAD = 1mA, -36V < VIN < -1.9V, 1mA < ILOAD < 600mA (Note 5) | 3 |
| SET Pin Current (full temperature range, l) | ISET | 49 | 50 | 51 | µA | VIN = -1.9V, ILOAD = 1mA, -36V < VIN < -1.9V, 1mA < ILOAD < 600mA (Note 5) | 3 |
| Output Offset Voltage (25C row, as printed) | VOS | -1 | 1 | mV | VIN = -1.9V, ILOAD = 1mA, -36V < VIN < -1.9V, 1mA < ILOAD < 600mA (Note 5) | 3 | |
| Output Offset Voltage (full temperature range, l) | VOS | -2 | 2 | mV | VIN = -1.9V, ILOAD = 1mA, -36V < VIN < -1.9V, 1mA < ILOAD < 600mA (Note 5) | 3 | |
| Load Regulation: ΔVOS (full temperature range, l) | ΔVOS | 1.2 | 2.5 | mV | ILOAD = 1mA to 600mA, VIN = -1.9V (Note 6) | 3 | |
| Output Regulation with SET Pin Voltage Change: ΔISET/ΔVSET (l) | ΔISET/ΔVSET | 0.2 | 2.5 | nA/V | VSET = 0V to -32V, VIN = -36V, ILOAD = 1mA | 3 | |
| Output Regulation with SET Pin Voltage Change: ΔVOS/ΔVSET (l) | ΔVOS/ΔVSET | 1 | 30 | µV/V | VSET = 0V to -32V, VIN = -36V, ILOAD = 1mA | 3 | |
| GND Pin Current at ILOAD = 10µA | 1 | 1.4 | mA | VIN = VOUT(NOMINAL), ILOAD = 10µA (Note 8) | 3 | ||
| GND Pin Current at ILOAD = 1mA | 1.05 | 1.4 | mA | VIN = VOUT(NOMINAL), ILOAD = 1mA (Note 8) | 3 | ||
| GND Pin Current at ILOAD = 100mA | 2.6 | 5 | mA | VIN = VOUT(NOMINAL), ILOAD = 100mA (Note 8) | 3 | ||
| GND Pin Current at ILOAD = 600mA | 11.5 | 22.5 | mA | VIN = VOUT(NOMINAL), ILOAD = 600mA (Note 8) | 3 | ||
| Ripple Rejection (120Hz) | 70 | 85 | dB | VIN, VOUT = -1.5V (Avg), VRIPPLE = 500mVP-P, fRIPPLE = 120Hz, ILOAD = 100mA, COUT = 4.7µF, CSET = 0.47µF | 3 | ||
| SHDN Pin Turn-ON Threshold, Positive SHDN Rising | 1.14 | 1.23 | 1.32 | V | Positive SHDN Rising | 3 | |
| SHDN Pin Turn-ON Threshold, Negative SHDN Rising (in Magnitude) | -1.36 | -1.27 | -1.18 | V | Negative SHDN Rising (in Magnitude) | 3 | |
| Quiescent Current in Shutdown (25C row) | 0.1 | 1 | µA | VIN = -6V, VSHDN = 0V | 3 | ||
| Quiescent Current in Shutdown (full temperature range, l) | 10 | µA | VIN = -6V, VSHDN = 0V | 3 | |||
| Internal Current Limit | 650 | 750 | 850 | mA | VIN = -1.9V, VOUT = 0V | 3 | |
| Internal Current Limit | 20 | 35 | 60 | mA | VIN = -36V, VOUT = 0V | 3 | |
| Internal Current Limit | 630 | 730 | 830 | mA | VIN = -1.9V, ΔVOUT < 10mV | 3 | |
| Max IOUT (programmable current limit) | 460 | 500 | 540 | mA | VIN = -1.9V, RILIM = 20k | 3 | |
| Max IOUT (programmable current limit) | 85 | 100 | 115 | mA | VIN = -1.9V, RILIM = 100k | 3 | |
| Positive Current Monitoring (IMONP) Scale Factor | 280 | 300 | 320 | mA/A | IOUT = 600mA, VIN = -2.5V, VIMONN = 2V, VIMONP = 0V | 4 | |
| Positive Current Monitoring (IMONP) at 100mA | 42.5 | 50 | 57.5 | µA | IOUT = 100mA, VIN = -2.5V, VIMONN = 2V, VIMONP = 0V | 4 | |
| Negative Current Monitoring (IMONN) Scale Factor | 560 | 600 | 640 | mA/A | IOUT = 600mA, VIN = -2.5V, VIMONN = 0V, VIMONP = -2.5V | 4 | |
| Negative Current Monitoring (IMONN) at 100mA | 85 | 100 | 115 | µA | IOUT = 100mA, VIN = -2.5V, VIMONN = 0V, VIMONP = -2.5V | 4 | |
| Minimum Required Load Current | 10 | µA | -36V < VIN < -1.9V (l) | 4 | |||
| IN Pin Voltage with respect to GND | VIN | -40 | 0.3 | V | with respect to GND pin | 2 | |
| ILIM Pin Voltage with respect to IN Pin | -0.3 | 0.7 | V | with respect to IN pin (Note 3) | 2 | ||
| IMONP Pin Voltage with respect to IN Pin | -0.3 | 40 | V | with respect to IN pin (Note 3) | 2 | ||
| IMONP Pin Voltage with respect to GND Pin | -40 | 20 | V | with respect to GND pin | 2 | ||
| IMONP Pin Voltage with respect to IMONN Pin | -40 | 20 | V | with respect to IMONN pin | 2 | ||
| IMONN Pin Voltage with respect to IN Pin | -0.3 | 40 | V | with respect to IN pin (Note 3) | 2 | ||
| IMONN Pin Voltage with respect to GND Pin | -40 | 20 | V | with respect to GND pin | 2 | ||
| SHDN Pin Voltage with respect to IN Pin | -0.3 | 55 | V | with respect to IN pin (Note 3) | 2 | ||
| SHDN Pin Voltage with respect to GND Pin | -40 | 20 | V | with respect to GND pin | 2 | ||
| SET Pin Voltage with respect to IN Pin | -0.3 | 36 | V | with respect to IN pin (Note 3) | 2 | ||
| SET Pin Voltage with respect to GND Pin | -36 | 36 | V | with respect to GND pin (±36V) | 2 | ||
| SET Pin Current | -5 | 5 | mA | Note 9 | 2 | ||
| OUT Pin Voltage with respect to IN Pin | -0.3 | 36 | V | with respect to IN pin (Note 3) | 2 | ||
| OUT Pin Voltage with respect to GND Pin | -36 | 36 | V | with respect to GND pin (±36V) | 2 | ||
| Operating Junction Temperature Range (E-grade) | TJ | -40 | 125 | °C | E-, I-Grade | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 Sec), MSE Package | 300 | °C | 10 sec soldering, MSE package | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | MSE package | 2 | ||
| Input Voltage Range (Wide Input Voltage Range) | VIN | -36 | -1.5 | V | Features: wide input voltage range | 1 | |
| Output Voltage Range (Rail-to-Rail) | VOUT | -32 | 0 | V | Features: rail-to-rail output voltage range | 1 | |
| Minimum Output Capacitor | COUT | 4.7 | µF | Stable with minimum output capacitor | 10 | ||
| Output Capacitor ESR | ESR | 0.5 | Ω | ESR less than 0.5Ω to prevent oscillations (COUT minimum 4.7µF) | 10 | ||
| Thermal Resistance Junction-to-Ambient (MSOP, 2500mm² top/bottom copper) | θJA | 33 | °C/W | MSE package, device on topside, 2500mm² top side copper, 2500mm² bottom side, 2500mm² board | 20 | ||
| Thermal Resistance Junction-to-Ambient (MSOP, 1000mm² top copper) | θJA | 33 | °C/W | MSE package, device on topside, 1000mm² top side copper, 2500mm² bottom side, 2500mm² board | 20 | ||
| Thermal Resistance Junction-to-Ambient (MSOP, 225mm² top copper) | θJA | 34 | °C/W | MSE package, device on topside, 225mm² top side copper, 2500mm² bottom side, 2500mm² board | 20 | ||
| Thermal Resistance Junction-to-Ambient (MSOP, 100mm² top copper) | θJA | 35 | °C/W | MSE package, device on topside, 100mm² top side copper, 2500mm² bottom side, 2500mm² board | 20 | ||
| Thermal Resistance Junction-to-Case | θJC | 8 | °C/W | MSE package | 2 |
CAD (KiCad official)
- Symbol:
LT3090EMSE#PBF - Footprint:
Package_SO:MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm - 3D model: MSOP-12-EP (KiCad packages3D, STEP)
- 3D model files:
lt3090emse-pbf-etched.step/lt3090emse-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3090emse-pbf.step/lt3090emse-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (36 pp, sha256
a02e3baeccf7ef6c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).