main
Ray Publish 0.1.0 c14b204
{
  "slug": "lt3085edcb",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Linear Voltage Regulators (LDO), DFN-6-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3085edcb#trmpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3085edcb.kicad_sym",
    "lt3085edcb.kicad_mod",
    "lt3085edcb.glb",
    "lt3085edcb.step",
    "lt3085edcb.lbr",
    "docs/hero.png",
    "docs/lt3085edcb-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3085edcb-hero.glb",
    "lt3085edcb-hero.overlay.json",
    "lt3085edcb-etched.glb"
  ],
  "component": {
    "mpn": "LT3085EDCB",
    "manufacturer": "Analog Devices",
    "package": "DFN-6-EP(2x3)",
    "pin_count": 7,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3085.pdf",
    "parts": {
      "symbol": "lt3085edcb.kicad_sym",
      "footprint": "lt3085edcb.kicad_mod",
      "model_3d": "lt3085edcb-hero.glb",
      "model_3d_plain": "lt3085edcb-etched.glb",
      "model_3d_step": "lt3085edcb-etched.step",
      "model_3d_step_plain": "lt3085edcb.step",
      "lbr": "lt3085edcb.lbr"
    },
    "distributor_links": {
      "lcsc": "C670368",
      "digikey": "LT3085EDCB#TRMPBFTR-ND",
      "mouser": "584-LT3085EDCBTRMPBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T03:55:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3085EDCB#TRMPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3085EDCBTRMPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability."
      },
      {
        "number": "2",
        "name": "OUT",
        "type": "power_out",
        "description": "Power output of the regulator, to be connected in parallel with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability."
      },
      {
        "number": "3",
        "name": "SET",
        "type": "input",
        "description": "Non-inverting input to the error amplifier and regulation set point, where a fixed 10µA flows out through an external resistor to program VOUT; the SET pin is clamped to OUT with ±10V absolute maximum voltage and ±15mA absolute maximum current."
      },
      {
        "number": "4",
        "name": "VCONTROL",
        "type": "power_in",
        "description": "Supply pin for the control circuitry, which must be at least 1.2V to 1.35V above VOUT for regulation; absolute maximum rating is 40V and -0.3V."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Collector of the power device through which the output load current is supplied, which must be at least 0.1V to 0.5V above VOUT for regulation; absolute maximum rating is 40V and -0.3V."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Collector of the power device through which the output load current is supplied, to be connected in parallel with pin 5; must be at least 0.1V to 0.5V above VOUT for regulation and absolute maximum rating is 40V and -0.3V."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Exposed pad is electrically OUT and must be soldered directly to VOUT on the PCB to pins 1 and 2."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exact MPN suffix LT3085EDCB#TRMPBF does not appear in the ordering table. The datasheet only say; The datasheet has no separate pin table for the DCB package. Pin numbers were taken from the Pin Fun; The exposed pad is listed as pin 7 for the DCB package. It is shown as pin 7 of type power_out (OUT)"
        ],
        "pages_sent": 28,
        "cost_usd": 0.1401,
        "at": "2026-11-12T03:55:29"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3085.pdf",
        "pages": 28,
        "sha256": "c5243716ea4c9cc7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.75,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3085edcb.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bebf38c8485db5c2e91002b6a76737987a023e17856ce8ea74e87d5934a0bdc7",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3085edcb-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "36367caccb2e8a204fdc8ae6eb7426de60a265b5f766d90efba60bdf9aefa80e",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DCB6",
      "source_page": 25,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 2.0,
        "range_mm": [
          1.9,
          2.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3085edcb.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}