main
History Download
Ray Publish 0.1.0 c14b204

LT3085EDCB#TRMPBF

Analog Devices · Linear Voltage Regulators (LDO) · DFN-6-EP(2x3)

LT3085EDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability.
2 OUT power_out Power output of the regulator, to be connected in parallel with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability.
3 SET input Non-inverting input to the error amplifier and regulation set point, where a fixed 10µA flows out through an external resistor to program VOUT; the SET pin is clamped to OUT with ±10V absolute maximum voltage and ±15mA absolute maximum current.
4 VCONTROL power_in Supply pin for the control circuitry, which must be at least 1.2V to 1.35V above VOUT for regulation; absolute maximum rating is 40V and -0.3V.
5 IN power_in Collector of the power device through which the output load current is supplied, which must be at least 0.1V to 0.5V above VOUT for regulation; absolute maximum rating is 40V and -0.3V.
6 IN power_in Collector of the power device through which the output load current is supplied, to be connected in parallel with pin 5; must be at least 0.1V to 0.5V above VOUT for regulation and absolute maximum rating is 40V and -0.3V.
7 OUT power_out Exposed pad is electrically OUT and must be soldered directly to VOUT on the PCB to pins 1 and 2.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-6-EP(2x3)
Category Power Supply Chip
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SET Pin Current (25°C) ISET 9.9 10 10.1 µA VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C 3
SET Pin Current (over temperature) ISET 9.8 10 10.2 µA VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9) 3
Output Offset Voltage (VOUT, VSET) (25°C) VOS -1.5 1.5 mV VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C 3
Output Offset Voltage (VOUT, VSET) (over temperature) VOS -3 3 mV VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9) 3
Load Regulation, Offset Voltage VOS -1 -0.6 mV ILOAD = 1mA to 500mA (Note 8) 3
Line Regulation, SET Pin Current ISET 0.1 0.5 nA/V VIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA 3
Minimum Load Current (VIN = VCONTROL = 10V) 300 500 µA VIN = VCONTROL = 10V 3
Minimum Load Current (VIN = VCONTROL = 36V) 1 mA VIN = VCONTROL = 36V 3
VCONTROL Dropout Voltage (100mA) 1.2 V ILOAD = 100mA 3
VCONTROL Dropout Voltage (500mA) 1.35 1.6 V ILOAD = 500mA 3
VIN Dropout Voltage (100mA) 85 150 mV ILOAD = 100mA 3
VIN Dropout Voltage (500mA) 275 450 mV ILOAD = 500mA 3
VCONTROL Pin Current (100mA) 3 6 mA ILOAD = 100mA 3
VCONTROL Pin Current (500mA) 8 15 mA ILOAD = 500mA 3
Current Limit 500 650 mA VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V 3
Load Regulation, SET Pin Current ISET -0.1 nA ILOAD = 1mA to 500mA 3
Line Regulation, Offset Voltage VOS 0.003 mV/V VIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA 3
Input Voltage (IN pin, relative to VOUT) VIN -0.3 40 V All voltages relative to VOUT 2
VCONTROL Pin Voltage (relative to VOUT) VCONTROL -0.3 40 V All voltages relative to VOUT 2
SET Pin Current ISET -15 15 mA Note 7 2
SET Pin Voltage (relative to OUT) -10 10 V Relative to OUT 2
Maximum Operating Junction Temperature (TJMAX) TJMAX 125 °C DCB package 2
Operating Junction Temperature Range (E grade) -40 125 °C E grade (LT3085EDCB, Notes 2, 10) 2
Storage Temperature Range -65 150 °C 2
Junction-to-Ambient Thermal Resistance θJA 73 °C/W DCB package, value printed in package header 2
Junction-to-Case Thermal Resistance θJC 10.6 °C/W DCB package, value printed in package header 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 3. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE 15

CAD (KiCad official)

  • Symbol: LT3085EDCB#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm
  • 3D model: DFN-6-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lt3085edcb-etched.step / lt3085edcb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3085edcb.step / lt3085edcb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 c5243716ea4c9cc7, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF