LT3060IDC#TRPBF

{
  "slug": "lt3060idc-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt3060idc#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3060idc-trpbf.kicad_sym",
    "lt3060idc-trpbf.kicad_mod",
    "lt3060idc-trpbf.glb",
    "lt3060idc-trpbf.step",
    "lt3060idc-trpbf.lbr",
    "docs/hero.png",
    "docs/lt3060idc-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3060idc-trpbf-hero.glb",
    "lt3060idc-trpbf-hero.overlay.json",
    "lt3060idc-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3060IDC#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914256293343232",
    "parts": {
      "symbol": "lt3060idc-trpbf.kicad_sym",
      "footprint": "lt3060idc-trpbf.kicad_mod",
      "model_3d": "lt3060idc-trpbf-hero.glb",
      "model_3d_plain": "lt3060idc-trpbf-etched.glb",
      "model_3d_step": "lt3060idc-trpbf-etched.step",
      "model_3d_step_plain": "lt3060idc-trpbf.step",
      "lbr": "lt3060idc-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C670002",
      "digikey": "LT3060IDC#TRPBFTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T13:18:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3060IDC#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REF/BYP",
        "type": "passive",
        "description": "A single capacitor from this pin to GND bypasses the reference noise and soft-starts the reference, with a 10nF bypass typically reducing output noise to 30µVRMS over 10Hz to 100kHz; the pin is pulled low in shutdown and must not be driven by active circuitry, and it must be left floating if low noise or soft-start is not needed."
      },
      {
        "number": "2",
        "name": "ADJ",
        "type": "input",
        "description": "This is the inverting input of the error amplifier, regulated to 600mV referenced to GND, with a typical bias current of 15nA flowing out of the pin, and a capacitor from ADJ to OUT is used for noise and transient improvement above 600mV; for fixed-voltage versions it must be left floating."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin that supplies the load, requiring a minimum 2.2µF ceramic output capacitor for stability, with a permissible output voltage range of 600mV to 44.5V."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin that supplies the load, requiring a minimum 2.2µF ceramic output capacitor for stability, with a permissible output voltage range of 600mV to 44.5V."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that supplies power to the device over an input range of 1.6V to 45V, with a 1µF to 10µF input bypass capacitor recommended and an IN pin voltage rating of ±50V absolute maximum."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that supplies power to the device over an input range of 1.6V to 45V, with a 1µF to 10µF input bypass capacitor recommended and an IN pin voltage rating of ±50V absolute maximum."
      },
      {
        "number": "7",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown input where pulling it low puts the device into a low-power state and turns the output off; it cannot be driven below GND unless tied to IN, the device does not function if left unconnected, and it should be tied to IN if unused."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; for the adjustable LT3060 the bottom of the output divider resistor should connect directly to this GND, and pin 8 must be tied to exposed pad pin 9 and the PCB ground."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad that is GND and must be soldered to the PCB, tied directly to pin 8 and the PCB ground to provide the enhanced thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The top-view drawing text on page 2 lists the DFN pins out of numeric order, so the numbering was ta; The requested output schema has no field for headline specs, so the datasheet headline values (input"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0726,
        "at": "2026-10-18T13:16:17"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588914256293343232",
        "pages": 26,
        "sha256": "4f8ff67718dd9090",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3060idc-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "914cd301aa2efff54a7c18fe40fe21c25b277d6109b6cb10afb266387128ddd0",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3060idc-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.92
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3ee56d510d25a31f1b75a8141c1375b2aa20b99794c473e25de5507e612f7233",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}